Magigoo Pro PC (Polycarbonate) Print Bed Adhesive | 50ml

Magigoo Pro PC 3D Printing Adhesive

Magigoo Pro PC is specifically designed for 3D printing polycarbonate plastics in FDM printers. It offers a very strong adhesion platform for polycarbonate based filaments. Such materials include pure Polycarbonate, filled Polycarbonates and PC alloys such as PC-ABS. Just like the original Magigoo adhesive, Magigoo PC is easy to use and releases on cooling.

Size: 50ml 

Includes: Magigoo Pro PC (1 bottle)

Works with: Polycarbonate (PC, PC-ABS)

 WARNING  Do not squeeze the bottle to avoid applicator popping off.

Application:
Shake the bottle.
Apply to the desired area by pressing the nib on the bed (activating the inner valve) and spreading as needed.
Print according to the filament/printer manufacturers recommendations.

Print Removal:
The part should become easier to remove on cooling.
If the part cannot be easily removed by hand, a part removal tool can be used to gently lift the part off the build-plate.
When using a brim, it is advisable to first peel off the brim around the part and then attempt to remove the print.

Cleaning:
Use a damp cloth to wipe off all the goo residues until a clean surface is visible.
To avoid cross contamination between adhesives we recommend wiping the glass build-plate once more after rinsing the cleaning cloth with water.
Only use water to clean off Magigoo residues, other solvents will not work as well as water or at all!

Magigoo Manual - This manual has some great info on bed adhesion.
SDS
TDS