Micro Swiss Upgrades

Microswiss All Metal Hotend Kit - 0.40mm Includes:0.40mm plated brass wear-resistant nozzle (1 pcs)Heat break (1 pcs)Jam nuts - to aid in removing old hotend (1 pcs) Description:The Microswiss all metal hotend allows you to print at much higher...

3D Print Cleanup Tool This deburring tool is great for cleaning the brim off the long, straight edges of your 3D prints. We find it easier to use than an Exacto knife, because the blade doesn't dig into the plastic print as easily. The swivel head makes...

Heat Break (Thermal Tube) for Microswiss All Metal Hotend Kit This is a replacement heat break for this Microswiss all metal hotend upgrade. Includes: Heat break (1 pcs) Fits:FinderFinder 2Inventor 2Guider 2

Heat Break (Thermal Tube) for Microswiss MK10 All Metal Hotend Kits This is a replacement heat break for the Microswiss MK10 All Metal Hotend Kit. Includes: Heat break (1 pcs) Thread: M7 Fits:Microswiss MK10 / MK11 HotendsFlashForge Creator...

Microswiss Plated Wear Resistant Nozzle This nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of...

  Microswiss Wear Resistant Nozzle (Plated Brass) Made from a 360 brass base material and plated with TwinClad XT coating.TwinClad XT coating is a nickel composite designed for very low friction. It offers one of the lowest coefficient of...

MK10 All Metal Hotend Kit - Microswiss The Microswiss all metal hotend allows you to print at much higher temperatures than with PTFE-lined hotend.  All metal hotends offer more consistent melt chamber control. During slow extrusion rates...

Microswiss MK10 Wear-Resistant (A2 Tool Steel) Nozzle for Microswiss All Metal Hotend Kit  Perfect for printing abrasive material, such as carbon fiber, metal filled, wood-filled, glow in the dark, etc. *Note: This...

MK10 Plated Wear-Resistant Nozzle for Microswiss All Metal Hotend Kit If you are printing abrasive material, such as carbon fiber, stainless steel, wood-filled or any other metal filled filaments, this will greatly improve the life of your...

MK10 Plated Wear-Resistant Nozzle for PTFE-Lined Hotend  This nozzle is for PTFE lined hotends only. It has a larger diameter hole in the top, so the PTFE tube can slide into the nozzle. It will not work with all metal hotends...

PB Select Nozzle Coat™  Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block...