MK3

MK3

MK3

Use the search box below to narrow down the Prusa MK3 parts you are looking for:

  • Revo ObXidian High Flow Nozzles

    Revo ObXidian High Flow Nozzle | E3D

    E3D

    Price: $59.95 - $319.95
    Revo™ ObXidian High Flow Nozzle The Revo High Flow ObXidian combines the Obxidian and High Flow features into one nozzle. Includes: Revo nozzle of selected size (1 pcs) High Flow Features: The Revo High Flow nozzle increases your...
    Price: $59.95 - $319.95
  • 3mm Filament for wire bundle support

    3mm Filament for Prusa Wiring Harness Support | Prusa Compatible

    PB Select™

    Price: $1.99
    PB Select™ 3mm Nylon Filament  This 3mm nylon filament is used in the wiring harness of Prusa i3 printers.The length is 50cm which is the proper length for the extruder wiring harness. It can be cut down to 30cm if you need it...
    Price: $1.99
  • Prusa Antivibration foot

    Anti-Vibration Foot - MK3, MK3.9, MK4 Series | Original Prusa

    PRUSA RESEARCH

    Price: $1.99
    Prusa Anti-Vibration Foot Includes: Anti-vibration foot (1 pcs) Fits:Prusa MK3Prusa MK3SPrusa MK3+Prusa MK3.5Prusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL To replace this part, please consult the Prusa Assembly Manuals. Make sure...
    Price: $1.99
  • Prusa 3D Printing Book

    Basics of 3D Printing with Josef Prusa | English

    PRUSA RESEARCH

    Price: $8.99
      Basics of 3D Printing with Josef Prusa   English Version  "Basics of 3D Printing" takes you on a tour through the 3D printing world. This is a print version, the e-book can be downloaded for free at prusa3d...
    Price: $8.99
  • Prusa 3D Printing Book

    Basics of 3D Printing with Josef Prusa | Spanish

    PRUSA RESEARCH

    Price: $8.99
      Basics of 3D Printing with Josef Prusa   Spanish Version  "Basics of 3D Printing" takes you on a tour through the 3D printing world. This is a print version, the e-book can be downloaded for free at prusa3d.com...
    Price: $8.99
  • E3D 623ZZ Roller Bearing

    Bearing (623ZZ) 3x10x4 mm | E3D

    E3D

    Price: $1.99
    623ZZ Roller Bearing A nice quality roller bearing from E3D. Metal covers to keep dirt out of the rolling elements. Includes: Bearing (1 pcs) Specifications:ID: 3mmOD: 10mmW: 4mm Fits: Hemera (motor/heatsink)
    Price: $1.99
  • Boron Nitride Thermal Paste 3cc

    Boron Nitride Thermal Paste

    PB Select™

    Regular Price: $11.65 - $116.50
    Price: $4.99 - $49.95
    Boron Nitride Thermal Paste (BN Paste) Thermal paste improves heat conduction and heat distribution in the hotend. Contains high quality ZYP™ Boron Nitride and proprietary binders which reduce cracking and flaking when dried...
    Regular Price: $11.65 - $116.50
    Price: $4.99 - $49.95
  • Filament sensor-Einsy cable

    Cable - IR Filament Sensor-Einsy - MK3 | Original Prusa

    PRUSA RESEARCH

    Price: $4.99
    Prusa IR Filament Sensor-Einsy Cable Runs from filament sensor to mainboard. Includes: Cable (1 pcs) Fits: MK3 To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for your printer model.
    Price: $4.99
  • PSU to Mainboard cable for Prusa MK3

    Cable - PSU to Einsy for Prusa MK3/3S/3S+ | Prusa Compatible

    PB Select™

    Price: $7.99
    PB Select™ PSU to Einsy Power Cable We use premium pure copper wire, tin plated copper connectors and adhesive heat shrink for a good quality long lasting cable. Includes: Power cable (1 pcs) Specs:Wire: 16 AWGLength: 18 inches...
    Price: $7.99
  • Copper Nozzle E3D Type

    Copper Nozzle - M6 RepRap, Prusa, E3D V6, Etc.

    PB Select™

    Price: $14.95
    PB Select™ Plated Copper Nozzle High precision copper nozzles is great for printing everything from PLA to PEEK.Copper has a much higher thermal conductivity than brass and these nozzles can handle high temperatures (up to 495c)...
    Price: $14.95
  • V6 Copper Heater block

    CopperBlock™ - RepRap Hot Block (Prusa, E3D V6 Compatible)

    PB Select™

    Price: $18.95
    PB Select CopperBlock™ Heater Block Nickel composite coated copper increases thermal conductivity.  Includes: Heater block (1 pcs)Set screw (1 pcs)Clamping screw (1 pcs) Specifications:Plating: Nickel CompositeMax Temperature:...
    Price: $18.95
  • V6 Hotend Kit - 24 Volt - MK3, MK3S, MK3S+

    E3D Prusa Hotend Kit (w/PTFE Tube) - MK3/S/+ | 24 Volt

    E3D

    Price: $64.95
    Prusa Specific E3D V6 Hotend Kit (24 volt) The is a kit and requires assembly. Click here for the assembly guide Includes:PTFE tube0.40mm nozzle (1 pcs)Heatsink (1 pcs)Collet with clip (1pcs)Prusa specific heat break (1 pcs)Heater...
    Price: $64.95
  • E3D Revo for Prusa MK3, MK3S, MK3S+ | 24 volt

    E3D Revo Upgrade Kit for Prusa MK3 Series | 24 volt

    E3D

    Price: $89.95 - $209.95
    E3D Revo™ Kit for Prusa MK3 Series (MK3, MK3S, MK3S+) The Revo™ Prusa kit is a drop-in replacement, giving you all the benefits of E3D’s Rapid Change Revo ecosystem in an easy-to-upgrade package. The E3D Revo kits come in two...
    Price: $89.95 - $209.95
  • 3D Print Cleanup Tool

    Edge Cleanup (Deburring) Tool for 3D Prints

    NOGA

    Price: $13.95
    3D Print Cleanup Tool This deburring tool is great for cleaning the brim off the long, straight edges of your 3D prints. We find it easier to use than an Exacto knife, because the blade doesn't dig into the plastic print as easily. The swivel head makes...
    Price: $13.95
  • Prusa MK3 RAMBo Board

    Einsy RAMBo Board (MK3 Firmware Pre-Loaded) | Original Prusa

    PRUSA RESEARCH

    Price: $129.95
    Please read our returns policy regarding electronic items Einsy RAMBo Mainboard for MK3 Includes: Einsy RAMBo with MK3 firmware (1 pcs)Plug Aligner plastic part (1 pcs)ATO Blade fuses 5A (rated for 32 VDC) (2 pcs)ATO Blade fuse 15A (rated for 32...
    Price: $129.95
  • Einsy RAMBo for Prusa

    Einsy RAMBo for Prusa MK3, MK3S/S+ | UltiMachine

    UltiMachine

    Price: $115.95
    Please read our returns policy regarding electronic items Einsy RAMBo Board for Prusa 3D Printers This Einsy board is made by UltiMachine in the USA. Comes with the selected firmware pre-loaded and is a direct swap replacement for the black &...
    Price: $115.95
  • Extension Cable Set for Revo Six Prusa Edition

    Extension Cable Set for Revo Six Prusa Edition | E3D

    E3D

    Price: $7.99
    Revo Cable Set for Revo Six Prusa Edition Includes: Heater cable (1 pcs)Thermistor cable (1 pcs) Fits (fits below printers with the Revo Six hotend upgrade):Prusa MK2Prusa MK2SPrusa MK2.5Prusa MK2.5SPrusa MK3Prusa MK3SPrusa MK3S+
    Price: $7.99
  • Idler Spring for Prusa Printers

    Extruder Idler Spring - 2 Pack | Prusa Compatible

    PB Select™

    Price: $4.99
    PB Select™ Idler Springs for Prusa Extruder Latch & MMU2S/3 Includes: Idler spring (2 pcs) Fits:MK2.5MK2.5SMK3MK3SMK3S+MiniMini+MMU2SMMU3 To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow...
    Price: $4.99
  • Flush Cut Wire Cutter - 5in |

    Flush Cut Trimmer (Side Cutters)

    PB Select™

    Price: $4.99
    Flush Cut Trimmers Also called side cutters. We use these trimmers for cutting filament, removing supports and cleaning up prints.  Includes: Trimmers (1 pc)
    Price: $4.99
  • Prusa Fuse Pack

    Fuse set for Einsy and RAMBo Mini | Little Fuse

    Littlefuse

    Price: $2.99
    Fuse Pack Replacement fuses for Einsy and RAMBo boards Includes:15 amp blade fuse (1 pcs)5 amp blade fuse (2 pcs) Fits:Prusa Einsy for MK3/S/+Prusa RAMBo Mini for MK2/S & MK2.5/SUltiMachine EinsyUltiMachine RAMBo Mini
    Price: $2.99
  • Prusa Y Axis Timing Belt

    GT Belt - 650mm - Y Axis of Prusa i3 Series

    Gates

    Price: $6.99
    2GT Timing Belt for Prusa Y axis Includes: Timing belt for Y axis (1 pcs) Specifications:Type: 2GTLength: 650 mmWidth: 6 mmPitch: 2 mm Fits:MK2MK2SMK2.5MK2.5SMK3MK3SMK3S+ To replace this part, please consult the Prusa Assembly Manuals. Make...
    Price: $6.99
  • Prusa X Axis Timing Belt

    GT Belt - 850mm - X Axis of Prusa i3 Series

    Gates

    Price: $6.99
    2GT Timing Belt for Prusa X Axis Includes: Timing belt (1 pcs) Specifications:Type: 2GTLength: 850 mmWidth: 6 mmPitch: 2 mm Fits:MK2MK2SMK2.5MK2.5SMK3MK3SMK3S+ To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow...
    Price: $6.99
  • Titanium heat break for Prusa

    Heat Break - Prusa Specific (Titanium) | Prusa Compatible

    PB Select™

    Price: $19.95
    PB Select™ Prusa Specific Titanium Heat Break High grade titanium helps eliminate heat-creep and is lighter than stainless steel. Similar to a standard E3D V6 heat break but with a special internal geometry for use with the...
    Price: $19.95
  • Prusa heatbreak

    Heat Break - Prusa Specific - MK2/2.5/S, MK3/3S/+ | E3D

    E3D

    Price: $19.95
    E3D Prusa Specific Heat Break This is the heat break that comes stock on many Original Prusa 3D printers. Includes: Prusa specific heat break (1 pcs) Fits:MK2MK2SMK2.5MK2.5SMK3MK3SMK3S+MMU2MMU2S To replace this part, please consult the...
    Price: $19.95
  • Prusa Heater Cartridge

    Heater Cartridge for MK3/3S/3S+ | Original Prusa

    PRUSA RESEARCH

    Price: $13.95
     or  Prusa Specific Hotend Heater Cartridge (24 volt) Replacement hotend heater cartridge (E3D 24V 40W). Includes: Heater cartridge (1 pcs) Specifications:Voltage: 24VWattage: 40W Fits:MK3MK3SMK3S+ Notes:1. This heater cartridge...
    Price: $13.95
  • E3D Universal Heatsink

    Heatsink - Universal V6 1.75mm with Coupling | E3D

    E3D

    Price: $13.95
      E3D Universal V6 1.75mm Heat Sink with Collet Designed to work with both Bowden and Direct Drive Hotends Includes:Heat sink for 1.75mm V6 Hotends (1 pcs)Collet with blue clip (1 pcs) Fits:E3D V6 HotendPrusa MK2/2.5/SPrusa MK3/S/S+
    Price: $13.95
  • Bondtech Heatsink for Nema 17 Stepper Motor

    Heatsink for Nema17 Stepper Motor - Black

    PB Select™

    Price: $2.49
    PB Select™ Black Heatsink for Nema17 Stepper Motor Heatsink in black anodized aluminum to remove heat from desired component.Equipped with self-adhesive on the back for easy attachment. Includes: Heatsink (1 pcs) Size: 40x40x10 mm
    Price: $2.49
  • Prusa idler pulley

    Idler Pulley | Original Prusa

    PRUSA RESEARCH

    Price: $7.99
    Idler Pulley Includes: Idler Pulley (1pcs) Fits:MK2MK2SMK2.5MK2.5SMK3MK3SMK3S+MINIMINI+ To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for your printer model.
    Price: $7.99
  • Prusa idler pulley

    Idler Pulley | Prusa Compatible

    PB Select™

    Price: $4.99
    PB Select™ Idler Pulley Includes: Idler pulley (1 pcs) Fits:MK2MK2SMK2.5MK2.5SMK3MK3SMK3S+MINIMINI+ To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for your printer model.
    Price: $4.99
  • LDO Controller for Prusa Printers

    LCD Screen (B&W) for Prusa i3 MK2/MK3 Series | LDO

    LDO Motors

    Price: $25.95
      Prusa Compatible LCD Screen Black (Dark Blue) background with white text - see images below. Includes:LCD screen with SD card reader (1 pcs)Connector cable (2 pcs) Fits:Prusa MK2Prusa MK2SPrusa MK2.5Prusa MK2.5SPrusa MK3Prusa MK3SPrusa...
    Price: $25.95
  • Prusa LCD Screen

    LCD Screen for Prusa i3 MK2/MK3 Series | LDO

    LDO Motors

    Price: $25.95
      Prusa Compatible LCD Screen This screen has blue background with white text like the Original Prusa screens. Includes:LCD screen with SD card reader (1 pcs)Connector cable (2 pcs) Fits:Prusa MK2Prusa MK2SPrusa MK2.5Prusa MK2.5SPrusa MK3Prusa...
    Price: $25.95
  • LM8UU Linear Bearing Set

    Linear Bearing - LM8UU - 4 Pack | MYT

    MYT®

    Regular Price: $16.95
    Price: $14.95
    MYT™ LM8UU Precision Linear Bearings Includes: Linear bearing (4 pcs) Specifications:ID: 8mmOD: 15mmL: 24mm Fits:Flashforge Creator Pro (Y Axis)Prusa MK2/SPrusa MK2.5/SPrusa MK3/S/+Prusa MINI/+Robo R1/+Anet A8Anet A8 PlusOther printers...
    Regular Price: $16.95
    Price: $14.95
  • Prusa Lubricant

    Lubricant Applicator Set (5g) | Original Prusa

    PRUSA RESEARCH

    Price: $6.99
    Prusa Lubricant Applicator Set Includes: Lubricant 5g (1 pcs)Applicator (1 pcs) After a certain period of time (see the 3D Printing Handbook), your printer should be cleaned and greased in order to work properly. More information...
    Price: $6.99
  • M3 Square nuts

    M3 Square Nuts - Stainless Steel | 10 Pack

    PB Select™

    Price: $2.99
    PB Select™ M3 Stainless Steel Square Nuts These thin square nuts work in many applications that require a thinner (1.75mm) square nut. Including E3D Hemera Stepper Motors, Prusa Printers and Bondtech Extruders. Includes: Square Nut (10 pcs)...
    Price: $2.99
  • M3 T Slot Nut with Spring

    M3 T-Slot Nut with Leaf Spring (for 3030) 5 Pack

    PB Select™

    Price: $4.99
    M3 Leaf Spring T-Slot Nut (3030) Plated roll-in t-slot nut with leaf spring. Includes: M3 T-Slot nut with leaf spring (5 pcs) Size:(Measured by hand - sizes are approximate)Length: 19.5mmWidth: 12mmHeight: 6.5mm Fits:3030 extrusionPrusa...
    Price: $4.99
  • Prusa and E3D compatible nozzle

    M6 Brass Nozzle - RepRap, Prusa, E3D V6, Etc.

    PB Select™

    Price: $5.99
    PB Select™ Brass Nozzle This premium brass nozzle will provide a smooth consistent print. Includes: Nozzle of selected size (1 pcs) For: 1.75mm diameter filament Fits:Prusa MK2Prusa MK2SPrusa MK2.5Prusa MK2.5SPrusa MK3Prusa MK3SPrusa...
    Price: $5.99
  • On Sale
    M6 RepRap Nozzle - Microswiss A2 Steel

    M6 RepRap Nozzle - A2 Steel | Microswiss

    Microswiss

    Now: $17.95
    Regular Price: $19.00
    Microswiss E3D Compatible Nozzle, Plated A2 Tool Steel, M6 Threads  Note: This nozzle is not compatible with the E3D Silicone Pro Sock. Use the standard silicone sock for this nozzle. This RepRap style nozzle is made from...
    Now: $17.95
    Regular Price: $19.00
  • Magnet for Prusa Filament sensor

    Magnet Set for Prusa Filament Sensor

    PB Select™

    Price: $4.99
    PB select™ Ball & Magnets for Prusa Filament Runout Sensor Includes:19x6x2mm magnet (1 pcs)10x6x2mm magnet (2 pcs)7mm steel ball (1 pcs)
    Price: $4.99
  • Prusa Mk3 heated build palte

    Magnetic Heatbed MK52 24V (Assembly) - MK3/3S/3S+ | Original Prusa

    PRUSA RESEARCH

    Price: $112.95
    Prusa 24 Volt Heated Bed Assembly This is a replacement (MK52 24 volt) magnetic heatbed. ONLY compatible with the MK3 and MK3S/+. Includes:Magnetic heatbed MK52 24 volt (1 pcs)Heatbed-Einsy power cable (screw-attached) (1 pcs)Heatbed...
    Price: $112.95
  • Needle File Set 6pcs | Original Prusa

    Needle File Set 6pcs | Yato

    PRUSA RESEARCH

    Price: $9.99
    Needle File Set  Files with different profiles: flat, square, triangular, lenticular, semicircular, roundmade of GCr15 bearing steel Includes: Files (6 pcs)
    Price: $9.99
  • Nozzle Coat™ for 3D Printing

    Nozzle Coat | 4ml

    PB Select™

    Price: $14.99
    PB Select Nozzle Coat™  Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block...
    Price: $14.99
  • Nozzle Torque Wrench - 1.8 Nm, 2.0 Nm, 2.5 Nm, 3.0 Nm

    Nozzle Torque Wrench - 1.8 Nm, 2.0 Nm, 2.5 Nm, 3.0 Nm

    PB Select™

    Price: $26.95
    PB Select™ Preset Torque Wrench  Includes:Preset Torque wrench (1 pcs)Bit holder FDM printed in POP Green ASA (1 pcs)1/4 inch socket adapter (1 pcs)6mm socket (1 pcs)7mm socket (1 pcs)8mm socket (1 pcs) Notes:Use on a clean...
    Price: $26.95
  • E3D Nozzle Wrench

    Nozzle Wrench for RepRap & Nextruder Nozzle

    PB Select™

    Price: $2.99
    Nozzle Wrench Handy little wrench for removing nozzles. Includes: Wrench (1 pcs) Sizes: 7.0 mm (RepRap, E3D, Nextruder Etc)5.5 mm5.0 mm4.5 mm (Sidewinder X3/X4) Fits:E3D V6 NozzlesPrusa Nextruder standard and highflow nozzles7mm RepRap...
    Price: $2.99
  • Original Prusa Bondtech drivegear (set)

    Original Bondtech Drive Gear Set for Prusa 3D Printers

    Bondtech

    Price: $34.95
    Genuine Bondtech Drive Gear Set for Prusa 3D Printers Comes as a set consisting of a primary drive gear, a secondary gear, bearings and shaft. Includes: Bondtech gear with a grub screw (1 pcs)Bondtech gear without a grub screw (1 pcs)Bearings (2...
    Price: $34.95
  • Prusa PEI Sheet

    PEI (ULTEM) Sheet | Original Prusa

    PRUSA RESEARCH

    Price: $12.99
    Prusa PEI-Ultem sheet Notes: 1. This is NOT the Spring steel sheet with smooth double-sided PEI.2. Tiny dots may appear on the PEI-Ultem surface. These can slightly affect the finished print bottom surface. However, they do not...
    Price: $12.99
  • Prusa PEI Sheet

    PEI Print Surface 260x242mm (9.5x10.2in) | ULTEM™ 1000

    SABIC

    Price: $9.95
    PEI Print Surface - 260x242mm Includes: PEI sheet with 3M adhesive backing (1 pcs) Notes:1. This is NOT the Prusa spring steel sheet with smooth double-sided PEI (Link).2. Tiny dots may appear on the PEI surface. These can slightly...
    Price: $9.95
  • PINDA Probe V2

    PINDA Probe V2 - MK2.5/S, MK3/S | Prusa Compatible

    PB Select™

    Price: $19.95
    PB Select™ Prusa Compatible V2 P.I.N.D.A Probe Includes: V2 PINDA (1 pcs) Fits:MK2.5MK2.5SMK3MK3S To test your current PINDA probe, follow this guide from the Prusa Knowledge Base.
    Price: $19.95
  • Prusa MMU2S to Einsy power cable

    Power Cable - MMU2S to Einsy - MK3, MK3S | Original Prusa

    PRUSA RESEARCH

    Price: $7.99
    Prusa MMU2S-Einsy power cable Replacement MMU2S to Einsy power cable.  Includes: Cable (1 pcs) Fits:MK3 with MMU2SMK3S with MMU2SMK3S+ with MMU2S Note: Only compatible with the MK3/S/+. NOT compatible with MK2.5/S printers. To...
    Price: $7.99
  • PC Power Cord

    Power Cord - NEMA 5-15P to EIC (PC Type)

    PB Select™

    Price: $4.95
    Power Supply Cord AC power cord that runs from the power supply to a USA type wall outlet  Includes: Power cord (1 pcs) Note: Power supply is not included
    Price: $4.95
  •  Prusa Brass Nozzle Brush | Original Prusa

    Prusa Brass Nozzle Brush | Original Prusa

    PRUSA RESEARCH

    Price: $6.99
      Prusa Brass Nozzle Brush Prusa Brass Nozzle Brush is optimized for 3D printing with its short and dense bristles. Includes: Brush (1 pcs) Made in EU with locally sourced beech wood.
    Price: $6.99
  • Prusa MK3 PSU Assembly

    PSU 24V 240W (assembly) MK3/3S/3S+ | Original Prusa

    PRUSA RESEARCH

    Price: $119.95
    Prusa MK3 Power Supply Assembly Replacement Power supply unit 24V 240W (assembly). It is ONLY compatible with MK3/S/+. The PSU itself is also available separately, without any cables or fasteners. Includes:Power supply unit 24V...
    Price: $119.95
  • M3ne Nut

    PSU Holder M3nE Nut - 2 Pack | Prusa Compatible

    PB Select™

    Price: $2.99
    PB Select™ Prusa PSU Holder Nut - 2 Pack Nickel plated M3nE nut. Used to secure the PSU to the t-slot rail. Includes: M3nE Nut (2 pcs) Fits:Prusa MK2.5Prusa MK2.5SPrusa MK3Prusa MK3SPrusa MK3S+Prusa MINIPrusa MINI+ To replace this part, please...
    Price: $2.99
  • Prusa Hotend PTFE Tube

    PTFE Tube for Hotend - MK2/2S, MK2.5, MK3 | Original Prusa

    PRUSA RESEARCH

    Price: $2.99
    Prusa Hotend PTFE Tube Includes: Hotend PTFE tube (1 pcs) Specifications:Length: 50 (tolerance +/- 0.2 mm)Inner diameter: 1.85 mmOuter diameter: 4 mm Fits:MK2MK2SMK2.5MK3MMU2 Note: Not compatible with the MK2.5S, MK3S, MK3S+ or MMU2S...
    Price: $2.99
  • V6 Fixing Kit

    RepRap Hotend Hardware Kit (E3D V6 & Prusa Compatible)

    PB Select™

    Price: $1.99
    PB Select™ Hardware Kit Includes:M3x16 - fan to fan duct (4 pcs)M3x10 pan head - to clamp heater (2 pcs)M3x4 set screw for thermistor (2 pcs)M2 hex wrench (1 pcs)M1.5 hex wrench (1 pcs) For:E3D V6Prusa i3RepRap
    Price: $1.99
  • On Sale
    E3D Revo High Flow Brass Nozzle

    Revo Brass High Flow Nozzle | E3D

    E3D

    Price: $35.99 - $199.95
    Revo™ High Flow Brass Nozzle The Revo High Flow Nozzle increases your setup's volumetric flow rate, enabling you to print faster. Revo High Flow maintains the exact same form factor as standard Revo Hotends. This means there is no need...
    Price: $35.99 - $199.95
  • On Sale
    Revo Nozzle Pack

    Revo Brass Nozzle | E3D

    E3D

    Price: $20.99 - $59.99
    Revo™ Brass Nozzle Single Nozzle Includes: Revo nozzle of selected size (1 pcs)ORTriple pack includes: 1 each of 0.25, 0.60 & 0.80mm nozzles Fits: All E3D Revo hotends Notes: - You may need to adjust your Z offset when changing...
    Price: $20.99 - $59.99
  • E3D Revo Prusa coldside kit

    Revo Coldside - Prusa MK2 or MK3 Series | E3D

    E3D

    Price: $37.99
    Revo Coldside Only - For Prusa MK2 and MK3 Series  Notes:  This is not a complete upgrade kit, this is the coldside only.You will also need to purchase a hotside pack if you do not already have one (see links below). Includes:1 x Revo Six...
    Price: $37.99
  • Heater Cartridge for E3D Revo

    Revo HeaterCore | E3D (104NT)

    E3D

    Price: $29.99 - $34.99
    Revo™ HeaterCore (With 104NT Thermistor) Includes:Heater cartridge/thermistor (1pcs)Spring (1 pcs)Silicone boot (1 pcs) Notes: Choose the correct voltage and wattage for your application.Before installing please read the HeaterCore wiring...
    Price: $29.99 - $34.99
  • Revo High Flow High Temperature Abrasive Resistant Nozzles | E3D

    Revo High Flow HTA Nozzles | E3D

    E3D

    Price: $66.45 - $389.95
    Revo High Flow, High Temp Abrasive (HF HT-A) Nozzle HF HT-A nozzles are high-temperature, high flow, abrasion-resistant nozzles. Much like ObXidian, these nozzles have a hardened steel tip, copper carrier and copper spreader segment to optimise the...
    Price: $66.45 - $389.95
  • Revo Hotside - Starter Packs - 24 Volt

    Revo Hotside - Starter Packs - 24 Volt | E3D

    E3D

    Price: $49.99
    Revo Starter Pack - 24 Volt  Note 1:  Please take care when making your product selection.The 104NT (E3D) comes with an E3D 104NT thermistor.The 100K (Creality) comes with a Creality specific HeaterCore and is not compatible with other...
    Price: $49.99
  • Revo Hotside - Highflow Packs - 24 Volt

    Revo Hotside Packs - High Flow, High Flow X | E3D

    E3D

    Price: $114.95 - $159.95
    Revo High Flow or High Flow X Hotside Pack - 24 Volt, 60 Watt  Note:  These hotsides come with an integrated E3D 104NT thermistor. Make sure this is the correct thermistor for your printer before ordering. This is not a...
    Price: $114.95 - $159.95
  • Revo ObXidian Nozzles

    Revo ObXidian Nozzles | E3D

    E3D

    Price: $54.95
    Revo™ ObXidian Nozzles The Revo ObXidian is specifically designed for printing fibre-filled polymers. ObXidian’s copper alloy construction has a similar thermal performance to Brass, making it a true drop-in replacement. Just use the...
    Price: $54.95
  • Heatsink for Revo 6

    Revo Six Heatsink | E3D

    E3D

    Price: $27.95
    Heatsink for Revo™ Six Includes:Heatsink (1 pcs)Collet (1 pcs)Collet clip (1 pcs)
    Price: $27.95
  • Revo Fully Loaded Silicon sock pack

    Revo Sock Pack - Basic Color Pack | E3D

    E3D

    Price: $8.99
    Revo™ Silicone Sock Pack Includes:Yellow (2 pcs)Red (2 pcs)Blue (2 pcs)Green (2pcs)HeaterCore socks (2pcs) Fits: E3D Revo Nozzles and HeaterCore
    Price: $8.99
  • Revo Spring Pack | E3D

    Revo Spring Pack | E3D

    E3D

    Price: $2.99
    Revo™ Spring Triple Pack Includes: Revo spring (3 pcs) These retention springs clip onto your Revo HeaterCore on one side, before connecting to any Revo-compatible cold side on the other – including the Revo Micro, Revo Six, and Revo...
    Price: $2.99
  • Screwdriver PH2 | Original Prusa

    Screwdriver PH2 | Original Prusa

    PRUSA RESEARCH

    Price: $4.99
    Screwdriver PH2 Screwdriver with a PH2 head. PH2 is the recommended standard for the screws used on Original Prusa Printers. Includes: Screwdriver (1 pcs) Specifications:Red Hand: PlasticScrewdriver length L1: 160 mmShank length...
    Price: $4.99
  • Prusa MMU2S Signal Cable

    Signal Cable - MMU2S to Einsy/Rambo | Original Prusa

    PRUSA RESEARCH

    Price: $7.99
    Prusa MMU2S-Einsy/Rambo signal cable Replacement MMU2S-Einsy/Rambo signal cable Includes: Cable (1 pcs) Fits the following printers with MMU2S:MK2.5SMK3MK3S To replace this parts, please consult the Prusa Assembly Manuals. Make sure to follow...
    Price: $7.99
  • E3D Style Silicon Sock

    Silicone Sock for RepRap & E3D V6 Style Hotend | 3 Pack

    PB Select™

    Price: $6.99
    PB Select™ V6 Silicone Sock The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature, reducing the amount of times your heater needs to cycle. As an added benefit, the silicone sock will keep filament...
    Price: $6.99
  • E3D Style Silicon Sock

    Silicone Sock for RepRap & E3D V6 Style Hotend | 3 Pack, Orange

    PB Select™

    Price: $7.99
    PB Select™ V6 Silicone Sock The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature, reducing the amount of times your heater needs to cycle. As an added benefit, the silicone sock will keep filament...
    Price: $7.99
  • On Sale
    Silicone Sock-X (Black) for Revo Nozzle | 4 Pack

    Silicone Sock-X (Black) for Revo Nozzle | 4 Pack

    Levendigs

    Now: $5.24
    Regular Price: $6.99
    Sock-X for E3D Revo Nozzle Nozzle not included This premium silicone sock uses a small air gap to lower the convection heat from the nozzle and can handle printing temps of up to 300c. Designed specifically for the E3D Revo Nozzle...
    Now: $5.24
    Regular Price: $6.99
  • On Sale
    Sock-X for Revo Nozzle - Blue

    Silicone Sock-X (Blue) for Revo Nozzle | 4 Pack

    Levendigs

    Now: $5.24
    Regular Price: $6.99
    Sock-X for E3D Revo Nozzles Nozzle not included This premium silicone sock uses a small air gap to lower the convection heat from the nozzle and can handle printing temps of up to 300c. The primary purpose of a silicone sock is to help...
    Now: $5.24
    Regular Price: $6.99
  • On Sale
    Sock-X for Revo Nozzle - Green

    Silicone Sock-X (Green) for Revo Nozzle | 4 Pack

    Levendigs

    Now: $5.24
    Regular Price: $6.99
    Sock-X for E3D Revo Nozzles Nozzle not included This premium silicone sock uses a small air gap to lower the convection heat from the nozzle and can handle printing temps of up to 300c.  The primary purpose of a silicone sock is to...
    Now: $5.24
    Regular Price: $6.99
  • On Sale
    Silicone Sock-X (Orange) for Revo Nozzle | 4 Pack

    Silicone Sock-X (Orange) for Revo Nozzle | 4 Pack

    Levendigs

    Now: $5.24
    Regular Price: $6.99
    Sock-X for E3D Revo Nozzles Nozzle not included This premium silicone sock uses a small air gap to lower the convection heat from the nozzle and can handle printing temps of up to 300c.  The primary purpose of a silicone sock is to...
    Now: $5.24
    Regular Price: $6.99
  • On Sale
    Sock-X for Revo Nozzle - Red

    Silicone Sock-X (Red) for Revo Nozzle | 4 Pack

    Levendigs

    Now: $5.24
    Regular Price: $6.99
    Sock-X for E3D Revo Nozzles Nozzle not included This premium silicone sock uses a small air gap to lower the convection heat from the nozzle and can handle printing temps of up to 300c.  The primary purpose of a silicone sock is to...
    Now: $5.24
    Regular Price: $6.99
  • On Sale
    Sock-X for Revo Nozzle - Yellow

    Silicone Sock-X (Yellow) for Revo Nozzle | 4 Pack

    Levendigs

    Now: $5.24
    Regular Price: $6.99
    Sock-X for E3D Revo Nozzles Nozzle not included This premium silicone sock uses a small air gap to lower the convection heat from the nozzle and can handle printing temps of up to 300c. The primary purpose of a silicone sock is to help...
    Now: $5.24
    Regular Price: $6.99
  • On Sale
    Silicone Sock-X for Prusa i3 Series | Black

    Silicone Sock-X for Prusa i3 Series | Black

    Levendigs

    Now: $5.24
    Regular Price: $6.99
    Sock-X  Heater block and nozzle not included This premium silicone sock can handle printing temps of up to 300c. Designed specifically for E3D V6 style hotends.  The primary purpose of a silicone sock is to help keep your hotend at a more...
    Now: $5.24
    Regular Price: $6.99