Nozzle Hardened Steel (0.60mm) Guider 2S HT | Flashforge
Flashforge Hardened Steel Nozzle
Orifice Size: 0.60mm
This upgraded nozzle is more abrasion resistant for printing carbon fiber filled or other abrasive filaments.
The thermal conductivity of a hardened steel nozzle is not as good as a brass nozzle. Therefor you may need to increase your extruder temperature by 5-15°C. When printing abrasive filaments slow your first layer printing speed to 10mm/s.
- Guider 2S HT
Guider 2S HT