Printer Parts

Robo R1+ X Carriage Includes: Carriage (1 pcs) Fits: R1/R1+ Note: Does not include the linear bearings. Click here to purchase linear bearings  

Robo R1+ X Carriage with Bearings  This is the bracket the extruder rides on. Includes: Carriage (1 pcs)Bearings (4 pcs) Fits:Robo R1Robo R1+ Note: this latest batch came bulk packaged, so there is minor scuffing on some of the plastic.

X-axis belt for MakerGear M3 (Rev.0 Only) and M2 3D Printer Genuine Gates GT Belt Includes: Belt (1 pcs) Location: X-Axis Fits: M3-SE (Rev.0 Only) - If you have an M3-SE Rev.1 click here for the proper beltM2 Note: If your belts...

Replacement X-axis belt for MakerGear M3-ID Right Extruder For: X-Axis - Right Extruder (front belt) Fits:  M3-ID Genuine Gates GT Belt Note: If your belts are worn, check your printer for alignment issues—misalignment is the most...

Replacement X-axis belt for MakerGear M3-SE Rev.1 and M3-ID Left Extruder For: X-Axis Fits:  M3-SE Rev.1 Only - If you have an M3-SE Rev.0 click here for the proper belt M3-ID left extruder (back belt) Genuine Gates GT Belt Note: If your...

  SLS X-Carriage kit for Prusa i3 MK3S Note: This X-Carriage kit is required to install the Bondtech Upgrade Kit for Prusa. This is very similar to the original X-Carriage Kit. The main difference is the 3D printed technology used to...

X-TIP™ Nozzle (Nickel Plated, Copper Alloy with Hardened Steel Tip) Includes: Nozzle of selected size (1 pcs)OrTriple pack (3 pcs) - one each of 0.40mm, 0.60mm, 0.80mm  The X-Tip is a nickel plated, copper alloy nozzle with a hardened...

   Used Item:  Removed from low hour 3D printers. Flashforge Stepper Motor - X/Y Axis (Read fit section below) Good quality Moons stepper motors with low hours.  Includes: Stepper motor (1 pcs)Drive pulley (1...

   Used Item:  Removed from low hour 3D printers. Flashforge Stepper Motor - X/Y Axis (Read fit section below) Good quality Moons stepper motors with low hours.  Includes: Stepper motor (1 pcs)Drive pulley (1...

Prusa xBuddy Board  Important  This xBuddy board is compatible only with two-wire Power Panic (black & white wires). Check your cables, before you order this part. Includes: xBuddy board (1 pcs) Fits: Prusa MK3.9Prusa...

xLCD Board Replacement xLCD board for the xLCD assembly. You need Firmware version 4.7.5 or newer for this display to work properly. See below, which printers are compatible. Includes: xLCD board (1 pcs)  Important Note: XL...

xLCD cable Replacement cable runs from xLCD to xBuddy board Includes: xLCD cable (1 pcs) Fits:Prusa MK3.5Prusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4S To replace this parts, please consult the Prusa Assembly Manuals. Make sure to follow...

xLCD Cable Replacement LCD cable for the Original Prusa XL Includes: xLCD cable (1 pcs) Fits: Prusa XL To replace this parts, please consult the Prusa Assembly Manuals. Make sure to follow the manual for your printer model.

xLCD PE Cable This is a replacement for xLCD PE cable Includes: xLCD PE Cable (1 pcs) More details:Connectors: 2x fastonLength: 1475 mm Fits: Prusa XL To replace this part, please consult the Prusa Assembly Manuals. Make sure to...

xLCD Plastic Parts (Case) Includes: Top case (1 pcs)Bottom case (1 pcs)Knob (1 pcs) Fits: Prusa MK4S To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for your printer...

Capricorn Low Friction XS Series Bowden Tubing  Includes: XS series tubing (1 pcs) Fits: 1.75mm diameter filament Length: 1 meter The XS series is Capricorn's flagship PTFE Bowden tubing and is considered the best in the...

  Flashforge Timing Belt - Y Axis Includes: Belt (1 pcs) Location: Y Axis Fits: Creator 3 Note: Item may differ from picture

  Y Axis Carriage Bracket - LEFT SIDE ONLY Includes: Left side bracket (1 pcs) Fits:Creator Max 2Creator Pro 2 Note: This is the left side bracket only and does not include the linear bearings, motor or pulley.

  Y Axis Carriage Bracket - LEFT SIDE ONLY This is the bracket that snaps onto the Y axis linear bearings. The idler pulley and x axis rods attach to this bracket Includes: Bracket (1 pcs) Fits:Creator MaxCreator ProInventorInventor...

  Y Axis Carriage Bracket - RIGHT SIDE ONLY Includes: Right side Bracket (1 pcs) Fits:Creator Max 2Creator Pro 2 Note: This is the right side bracket only and does not include the linear bearings, motor or pulley.