Parts, Accessories & Supplies

5 Volt Fan for Revo™ Micro Includes:  Fan (1 pcs) Voltage: 5 voltsSize: 20x20x10mm  Warning  This fan must be connected using the 5V regulator unless connecting directly to a 5V pin.

E3D Heat-Break - Kraken/Chimera - 1.75mm Heatbreak for the Kraken. This is also used in the Chimera, but is different from the Cyclops heat break. Please Note: Sold in units of 1 (For a Chimera, you will need 2. For a Kraken, you will need 4)

Slice Engineering Heater Cartridge Includes: Heater cartridge (1 pcs) 12 volt50 watts22 mm LongDiameter sized to fit into a 6 mm H7 tolerance hole1.2 meter lead includedGenuine Molex™ connectors 

Original CR-10s Pro/Max Nozzle with M6x.75mm Threads   The Micro Swiss plated wear resistant nozzle starts as a precision machined brass nozzle and then has the Micro Swiss TwinClad XT coating applied. The result is a...

  Micro Swiss Plated Wear Resistant Nozzle This nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient...

MK10 Plated Wear-Resistant Nozzle for PTFE-Lined Hotend  This nozzle is for PTFE lined hotends only. It has a larger diameter hole in the top, so the PTFE tube can slide into the nozzle. It will not work with all metal hotends...

MK10 Plated Wear-Resistant Nozzle for Micro Swiss All Metal Hotend Kit If you are printing abrasive material, such as carbon fiber, stainless steel, wood-filled or any other metal filled filaments, this will greatly improve the life of your...

  Micro Swiss MK8 Wear Resistant Brass Nozzle  Size: Select Above Includes: MK8 nozzle (1 pcs) - Made from a 360 brass base material and plated with TwinClad XT coating, a nickel composite coating designed for very low friction.-...

Nozzle Coat™  Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block. Includes:...

Fan Regulator for Revo™ Micro Drops voltage to 5 volts. For use with E3D Micro Revo Fan. Includes: Regulator (1 pcs) Max Input: 24 volts

PB Select™ Plated Copper Nozzle High precision copper nozzles is great for printing everything from PLA to PEEK.Copper has a much higher thermal conductivity than brass and these nozzles can handle high temperatures (up to 495c)...

60x60x15 mm Fan Dual Ball Bearing 2 wires 8 inch leads 0.13amp  

Premium Heater Cartridge Includes: Heater (1 pcs) Specifications: Volts: 12Watts: 70Amps: 5.83Size: 6x20mmLeads: 1000mmMax Temperature: 320c  

PB Select™ Hemera Compatible Titanium Heat Break (1.75mm) Incudes: Heat Break (1 pcs) Fits: Hemera Extruder Note:For 1.75mm filament onlyAfter changing hotend parts, a PID tune is recommended. 

E3D Hemera Heatsink Heatsink assembly for the E3D Hemera. Includes: Heatsink (1 pcs) Fits: E3D Hemera extruder

Hobbed Gear Hobbed gear with stainless steel teeth for Titan Extruder Fits: E3D Titan Extruder Please Note: This is an aftermarket hobbed gear. Click here if you want the OEM E3D hobbed gear

Original BuildTak Sheet Size: 203x254mm (8x10in) Includes: Original BuildTak Sheet (1 pcs) Features:Creates an optimal bond between the 3D printed object and build surfaceAllows for clean and easy removal of the object from the build...

  BuildTak PEI Sheet Includes: PEI sheet (1 pcs) Size: 228x254mm (9x10 inches)  An ideal print surface for the Original Prusa i3 MK2 and other 9x10 print beds. Manufactured in the USA to ensure consistent quality,...

High Tamp PTFE Tube - Clear Includes: 3 meter PTFE tube (1 pcs) Inside diameter: 2mm (± .1mm) Outside Diameter: 4mm Color: Clear Max Temp: 260°c This premium high temperature PTFE tubing can withstand temperatures of up to 260°c. The...

  Micro-Swiss Wear-Resistant Nozzle with M6 Threads This M6 thread, Robo 3D style nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It...