Fluor Orange Stained HDglass PETG by Formfutura
Slightly Translucent. Heavy duty premium PETG filament that prints with a beautiful high gloss finish and shine.
HDglass Filament Print...
Mosquito Magnum Hotend from Slice Engineering
Newly updated Mosquito™ Magnum (latest version, with coated heat break)
The Mosquito Magnum is best for nozzle sizes 0.40mm or larger. You can use...
Formfutura PETG HDglass Blinded Silver - 1.75mm 750g
Opaque. Heavy duty premium PETG filament that prints with a beautiful high gloss finish and shine.
Formfutura HDglass Filament Print...
Formfutura PETG Hdglass Blinded Pearl Blue - 1.75mm 750g
Opaque. Heavy duty premium PETG filament that prints with a beautiful high gloss finish and shine.
Formfutura HDglass Filament Print...
Formfutura PETG HDglass See Through Yellow - 1.75mm 750g
Translucent, heavy duty premium PETG filament that prints with a beautiful high gloss finish and shine.
Formfutura HDglass Filament...
Mosquito Magnum Hotend from Slice Engineering
Newly updated Mosquito™ Magnum (latest version, with coated heat break)
The Mosquito Magnum is best for nozzle sizes 0.40mm or larger. You...
24 Volt, 50 Watt Heater Cartridge
24 volt (find the 12 volt here)
50 Watt
1.5 meter lead
22 mm long cartridge
Diameter to fit 6 mm H7 hole
321SS cartridge improves longevity and...
1.5nm Nozzle Torque Wrench from Slice Engineering
Designed for Slice Engineering Vanadium Nozzles™
Achieve a proper seal without over tightening
This 1/4 inch nozzle torque wrench is...
Bondtech BMG-M Extruder for Slice Engineering Mosquito Hotends
For 1.75mm filament
Optimized for the Slice Engineering Mosquito and Mosquito Magnum hotends
High performance and resolution with...