MINI/+

  Bondtech CHT Coated Brass Nozzle - M6 Bondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used...

Microswiss CM2 Nozzle The Microswiss CM2™ Nozzle is an ideal nozzle for all applications. The core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating. This special alloy retains its...

PB Select™ Plated Copper Nozzle High precision copper nozzles is great for printing everything from PLA to PEEK.Copper has a much higher thermal conductivity than brass and these nozzles can handle high temperatures (up to 495c)...

CopperBlock™ Hot Block for Prusa MINI Nickel composite coated copper hot block for increased thermal conductivity.  Includes:Copper heater block (1 pcs)Set screw (1 pcs)Heater clamping screw (1 pcs) Fits:Prusa MINIPrusa MINI+ Note: After...

Digital Calipers Kinex 150mm (Kinex is now K-MET) Features:Measuring length: 150mm/ 6in0,01mm resolutionmm/in toggle buttonKeeps measured value after turning offDIN 862, ČSN EN ISO 13385-1 Includes: Digital calipers (1 pcs)Plastic case (1...

E3D Revo™ for Prusa MINI Edition Revo™ Prusa MINI edition is a drop-in replacement, giving you all the benefits of E3D’s Rapid Change Revo ecosystem in an easy-to-upgrade package. The E3D Revo kits come in two separate parts. A...

Revo Cables for Prusa MINI/+ Includes: Heater cable (1 pcs)Thermistor cable (1 pcs) Fits (fits below printers with the Revo Micro hotend upgrade):Prusa MINIPrusa MINI+

Extruder Drive Gear (Motor Pinion) for Prusa MINI OEM Extruder Drive Gear (Motor Pinion) replacement for the Original Prusa MINI and MINI+ extruder motor. This drive gear sits directly on the extruder motor shaft. Includes:Extruder Drive Gear (Motor...

Prusa MINI Extruder Driven Gear (Filament Spur) Extruder Driven Gear (Filament Spur) replacement part for the Original Prusa MINI and Mini+. This is the driven/idler gear pushing the filament inside the extruder assembly. Includes: Extruder Driven...

PB Select™ Idler Springs for Prusa Extruder Latch & MMU2S/3 Includes: Idler spring (2 pcs) Fits:MK2.5MK2.5SMK3MK3SMK3S+MiniMini+MMU2SMMU3 To replace this part, please visit the Prusa knowledge base at help.prusa3d.com

Prusa MINI/+ Filament Sensor (assembly) Includes:IR filament sensor 1 (pcs)IR filament sensor-Buddy board cable (1 pcs)Textile sleeve (Length: 220 mm, Width: 5 mm) (1 pcs)PTFE tube (1 pcs)MINI Fsensor box (1 pcs)MINI Fsensor cover (1...

Flush Cut Trimmers Also called side cutters. We use these trimmers for cutting filament, removing supports and cleaning up prints.  Includes: Trimmers (1 pc)

Prusa X Axis GT Timing Belt Includes: Belt (1 pcs) Location: X axis Fits:MINIMINI+ To replace this part, please visit the Prusa knowledge base at help.prusa3d.com

Prusa Y Axis Timing Belt Includes: Belt - Y Axis (1 pcs) Fits:MINIMINI+ To replace this part, please visit the Prusa knowledge base at help.prusa3d.com

Prusa MINI Hotend Heatbreak This is an OEM Prusa MINI/+ hotend heat break. Includes:Hotend heat break MINI/+ (1 pcs)Thermal paste (0.5g) (1 pcs) Fits:MINIMINI+ Note: it is ONLY compatible with the Original Prusa MINI and MINI+. To...

Bondtech Stainless Steel Heat Break Kit for Prusa MINI and MINI+ Stainless Steel heat break for the Prusa Mini. Solves the heat-creep issues revealed during the extensive testing Bondtech performed on the Prusa Mini. The adjusted length of the...

Prusa Prusa MINI Heater Block This is an OEM Prusa MINI heater block. Includes:Heater block (1 pcs)Screws: M3x4 (1 pcs), M3x10r (1 pcs)Thermal paste (0.5g) (1 pcs) - Important! The thermal paste should not be applied to the hot side...

PB Select™ Heater Block for Prusa MINI Includes:Aluminum heater block (1 pcs)Set screw (1 pcs)Heater clamping screw (1 pcs) Fits:Prusa MINIPrusa MINI+  Note: After changing hotend parts, a PID tune is recommended. 

Prusa MINI Hotend Heater Cartridge This is a replacement hotend heater cartridge (E3D 24V 40W). Includes: Heater cartridge - E3D 24V 40W (1 pcs) Specifications:Voltage: 24VWattage: 40WLength: 820 mm Fits:MINIMINI+ Note: The Molex...

PB Select™ Heater Cartridge for Prusa MINI Consistent heating through the cartridge for better heat distribution to the heater block Includes: Heater cartridge (1 pcs) Specifications:Volts: 24 VDCWatts: 40Leads: 820mm silicone...