Prusa Research

Revo™ Brass Nozzle Single Nozzle Includes: Revo nozzle of selected size (1 pcs)ORTriple pack includes: 1 each of 0.25, 0.60 & 0.80mm nozzles Fits: All E3D Revo hotends Notes: - You may need to adjust your Z offset when changing...

Revo Coldside Only - For Prusa MINI/+  Notes:  This is not a complete upgrade kit, this is the coldside only.You will also need to purchase a hotside pack if you do not already have one (see links below). Includes:Collet (1 pcs)Collet...

Revo Coldside Only - For Prusa MK2 and MK3 Series  Notes:  This is not a complete upgrade kit, this is the coldside only.You will also need to purchase a hotside pack if you do not already have one (see links below). Includes:1 x Revo Six...

Revo™ HeaterCore (With 104NT Thermistor) Includes:Heater cartridge/thermistor (1pcs)Spring (1 pcs)Silicone boot (1 pcs) Notes: Choose the correct voltage and wattage for your application.Before installing please read the HeaterCore wiring...

Revo High Flow, High Temp Abrasive (HF HT-A) Nozzle HF HT-A nozzles are high-temperature, high flow, abrasion-resistant nozzles. Much like ObXidian, these nozzles have a hardened steel tip, copper carrier and copper spreader segment to optimise the...

Revo Starter Pack - 24 Volt  Note 1:  Please take care when making your product selection.The 104NT (E3D) comes with an E3D 104NT thermistor.The 100K (Creality) comes with a Creality specific HeaterCore and is not compatible with other...

Revo High Flow or High Flow X Hotside Pack - 24 Volt, 60 Watt  Note:  These hotsides come with an integrated E3D 104NT thermistor. Make sure this is the correct thermistor for your printer before ordering. This is not a...

Revo™ ObXidian Nozzles The Revo ObXidian is specifically designed for printing fibre-filled polymers. ObXidian’s copper alloy construction has a similar thermal performance to Brass, making it a true drop-in replacement. Just use the...

Heatsink for Revo™ Six Includes:Heatsink (1 pcs)Collet (1 pcs)Collet clip (1 pcs)

Revo™ Silicone Sock Pack Includes:Yellow (2 pcs)Red (2 pcs)Blue (2 pcs)Green (2pcs)HeaterCore socks (2pcs) Fits: E3D Revo Nozzles and HeaterCore

Revo™ Spring Triple Pack Includes: Revo spring (3 pcs) These retention springs clip onto your Revo HeaterCore on one side, before connecting to any Revo-compatible cold side on the other – including the Revo Micro, Revo Six, and Revo...

Prusa XL Rubber Foot Includes: Rubber foot (1 pcs) Fits: XL To replace this part, please visit the Prusa knowledge base at help.prusa3d.com

Rubber Pads Includes: Rubber pads 20x10x1mm (6 pcs) Fits:Prusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4S To replace this part, please visit the Prusa knowledge base at help.prusa3d.com

Prusa Sandwich Board for XL Replacement Sandwich board for the XL.  Includes: Sandwich board (1 pcs) Fits: XL To replace this part, please visit the Prusa knowledge base at help.prusa3d.com

PB Select™ Screw Guide Includes: Screw Guide (1 pcs) Details: Version of this replacement: R2Required quantity: 1 pcColor: Black Fits: Prusa MMU3 To replace this part, please visit the Prusa knowledge base at help.prusa3d...

PB Select™ Nextruder Hotend Screw Kit Includes:Set Screw (5 pcs)Pan Head Screw (2 pcs)T6 Torx WrenchT8 Torx Wrench Specs:Set Screw: M3x4mm, T6 torx headFor fastening thermistors and heater cartridge Pan Head: M2.5x6mm, T8 torx headFor fastening...

Screwdriver PH2 Screwdriver with a PH2 head. PH2 is the recommended standard for the screws used on Original Prusa Printers. Includes: Screwdriver (1 pcs) Specifications:Red Hand: PlasticScrewdriver length L1: 160 mmShank length...

Selector Motor for MMU2S/MMU3 Includes:Selector motor (1 pcs)Trapezoid nut (1 pcs) Specifications:Connector: MOLEX 50-57-9404Rated current: DC 1A Fits:MMU2SMMU3 To replace this part, please visit the Prusa knowledge base at help.prusa3d...

M3x4 Set Screw (Grub Screw) Includes: Set screw (5 pcs) Size: M3x4mmGrade: 12.9Head Type: Hex Fits heater block of:E3D V6Prusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL Note: These are hex head set screws, not torx head (torx head is...

M3X4 Torx Head Set Screw Used on the Nextruder heater block Includes: M3x4 set screw (5 pcs) Note: Uses T6 Torx driver to install (not included) Fits:Prusa MK3.9Prusa MK3.9SPrusa MK4Prusa MK4SPrusa XL