Description
Robo R1/R1+ Compatible Heater Cartridge Extension Cable
PBX brand extension cable for R1/R1+ heater cartridge
This cable has a plug on one end to plug into the R1/R1+ heater cartridge wire and bare wires (no plug) at the other end, so you will need your own connector.
Fits: R1/R1+
Related Products
R1+ Thermistor | Robo 3D
Robo 3D
$14.95
R1+ Thermistor
Robo OEM R1+ Replacement ThermistorFits: R1 and R1+
Heater Cartridge - R1+ | Robo 3D
Robo 3D
$14.95
Robo R1/R1+ Heater Cartridge
Robo OEM heater cartridge (also called heater core).Fits: R1/R1+
R1+ Compatible Thermistor
Other
$12.95
R1/R1+ Compatible Replacement Thermistor
PBX brand thermistorFits: Robo R1 and R1+
Hotend Assembly - R1+ | Robo 3D
Robo 3D
$49.95
Robo R1+ Hexagon Hot End Assembly
For 1.75mm filament
Includes:
Complete Hotend12V Heater CartridgeThermistor0.40mm Brass Nozzle
Note the proper routing of the hotend wires in the picture above...
Heated Glass Build Plate R1+ | Robo 3D
Robo 3D
$89.95
Robo R1+ Heated Glass Build Plate - V2
This is the heated glass build plate only. It does not include the bed to RAMPs connection cable. Check the plug in the above picture to see if you need the...
Bed Connection Cable - R1+ | Robo 3D
Robo 3D
$9.95
Robo OEM R1+ Heated Bed Connection Cable
If you currently have a V1 bed with a long cable, you will need this extension cable if you are upgrading to the V2 bed (which has a short cable)...
