Robo R1

Robo R1+ Extruder Bracket  Includes: Bracket (1 pcs) Fits:Robo R1Robo R1+ 

Robo R1+ Big Extruder Drive Gear  Includes: Gear (1 pcs) Fits:Robo R1Robo R1+ 

Robo R1+ Small Extruder Drive Gear Includes: Gear (1 pcs) Fits:Robo R1Robo R1+ 

Robo Extruder Latch  Includes:  Latch (1 pcs) Fits:Robo R1Robo R1+

Robo Fan Bracket  This is the bracket that holds the heatsink cooling fan Includes: Bracket (1 pcs) Fits:Robo R1Robo R1+

Robo R1+ Filament Guide Includes: Plastic guide (1 pcs) Fits:Robo R1Robo R1+

Hotend Cable Guide for R1 Guides the hotend heater and thermistor cable When installing, rotate your hotend 90 degrees so the wires face the front of the printer. Designed by: Bob R.  

Robo R1+ Hotend Quick Release Plate This plate locks the hotend in place. Hardware not included.  Includes: Hotend plate (1 pcs) Fits: Robo R1Robo R1+ 

Rubber Feet for Robo R1+ Includes: Rubber foot (4 pcs) Fits:Robo R1Robo R1+

Robo R1+ SD Card Bracket  Includes: Bracket (1 pcs) Fits:Robo R1Robo R1+   

Robo R1+ Spool Holder  Includes: Spool holder (1 pcs) Fits:Robo R1Robo R1+  Note: These are new, but this recent batch is older stock that has minor scuffing from storage.

Robo R1+ X Carriage Includes: Carriage (1 pcs) Fits: R1/R1+ Note: Does not include the linear bearings. Click here to purchase linear bearings  

Robo R1+ X Carriage with Bearings  This is the bracket the extruder rides on. Includes: Carriage (1 pcs)Bearings (4 pcs) Fits:Robo R1Robo R1+ Note: this latest batch came bulk packaged, so there is minor scuffing on some of the plastic.

Robo R1+ Y Axis Pillow Blocks  Two complete sets. Hardware not included. Includes: Pillow block - top half (2 pcs)Pillow block - bottom half (2 pcs)  Fits:Robo R1Robo R1+ 

Robo R1+ Y Belt Clamp - 2 Pack Includes: Belt clamp (2 pcs) Location: Y belt Fits:Robo R1Robo R1+

Y Bracket for Robo R1+ These brackets connect the two Y-Axis rods that the bed travels on.  Note: Magnets will need to be glued in, in the appropriate orientation for your glass bed. We recommend using Epoxy, Polymer Bonding Kit or...

Idler Side Z Axis Carriage for Robo R1+ Replacement Z Carriage for the idler side Z-axis (non motor side) Includes: Carriage (1 pcs) Location: Idler Side Fits: R1+ Note: This is the carriage only, it does not...

Motor Side Z Carriage for Robo R1+ Replacement z axis carriage with motor mount for Z-axis. Includes: Carriage (1 pcs) Location Motor Side (1 pcs) Fits: R1+ Note This is the carriage only, it does not include: bearings, leadscrew...

Robo R1+ Z Stabilizer Brackets Includes: Brackets (2 pcs) Fits:Robo R1Robo R1+ 

Robo R1+ Z Stop Brackets  Includes: Bracket (2 pcs) Fits:Robo R1Robo R1+