Y Bracket for Robo R1+
These brackets connect the two Y-Axis rods that the bed travels on.
Note: Magnets will need to be glued in, in the appropriate orientation for your glass bed. We...
Robo R1+ Hexagon Hot End Assembly
For 1.75mm filament
Includes:Complete Hotend (1 pcs)12V Heater Cartridge (1 pcs)Thermistor (1 pcs) -- the thermistor wire is very delicate and is...
Robo R1+ Heated Glass Build Plate - New Style
Important: Please read all the notes below before purchasing.
If your current bed does not have the plug shown in the picture of the bed, you will also...
Robo R1/R1+ Heater Cartridge Extension Cable
Extension cable for R1/R1+ heater cartridge
This cable has a plug on one end to plug into the R1/R1+ heater cartridge wire and bare wires (no...
3mm Bed Magnets for R1/+ Glass Bed
Apply using epoxy and these clamps for best results.
Includes: Magnet (4 pcs)
Fits:Robo R1Robo R1+
Note: These magnets are 3mm thick and do not work...
Robo R1+ Heated Bed Connection Cable
You will need this extension cable if you are upgrading from a v1 bed (with a long cable) to the v2 bed (which has a short cable). Buy the...
