Robo R1
Use the filter box below to narrow down the Robo R1+ parts you are looking for:
-
Power Switch - R1+ | Robo 3D
Robo 3D
Price: $3.95Power Rocker Switch for Robo R1+ 3D Printer Includes: Switch (1 pcs) Fits: Robo R1Robo R1+Price: $3.95 -
Robo 3D Plated Wear Resistant Nozzle - Micro-Swiss
Micro Swiss
Price: $14.95Micro-Swiss Wear-Resistant Nozzle with M6 Threads This M6 thread, Robo 3D style nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It...Price: $14.95 -
Rubber Feet (4 Pack) R1+ | Robo 3D
Robo 3D
Price: $4.49Rubber Feet for Robo R1+ Includes: Rubber foot (4 pcs) Fits:Robo R1Robo R1+Price: $4.49 -
SD Card Bracket - R1+ | Robo 3D
Robo 3D
Price: $4.95Robo R1+ SD Card Bracket Includes: Bracket (1 pcs) Fits:Robo R1Robo R1+Price: $4.95 -
Spool Holder - R1+ | Robo 3D
Robo 3D
Price: $16.95Robo R1+ Spool Holder Includes: Spool holder (1 pcs) Fits:Robo R1Robo R1+ Note: These are new, but this recent batch is older stock that has minor scuffing from storage.Price: $16.95 -
Stepper Driver with Heatsink - R1/+ | Robo 3D
Robo 3D
Price: $7.95Stepper Driver for the Robo R1/+ 3D Printer Includes: Stepper Driver (1 pcs)Heatsink (1 pcs) Fits: Robo R1Robo R1+ Color of stepper driver may be different than picturePrice: $7.95 -
Stepper Motor with Gear - Extruder (Also fits X/Y Axis**) - R2, C2, R1* | Robo 3D
Robo 3D
Price: $28.95Nema17 Stepper Motor for Robo R2 and C2 3D Printers Includes:Motor (1 pcs)Filament drive gear - installed (1 pcs) Fits: Robo R2Robo C2*Robo R1/+ (X/Y Axis Only) **Notes: This motor will work for the X and Y axis of all the above printers...Price: $28.95 -
Stepper Motor X/Y/Extruder - R2, C2, R1/+ | Robo 3D
Robo 3D
Price: $26.95Nema17 Stepper Motor For the X/Y and Extruder axis of the R1/+, R2 and C2 3D printers. Includes: Motor (1 pcs) Fits:Robo R2Robo C2Robo R1Robo R1+Price: $26.95 -
Synthetic Grease with PTFE - 1 cc | Super Lube™
Super Lube
Price: $0.99Super Lube 82340 - Synthetic Grease with SYNCOLON™ (PTFE) This small size pouch is great for lubing the filament drive gears on dual gear or orbiting gear extruders. Includes: 1 Pouch Size: 1 cc Contains no...Price: $0.99 -
Synthetic Grease with SYNCOLON™ (PTFE) | 12g
Super Lube
Price: $5.99Super Lube 21010 - Synthetic Grease with SYNCOLON™ (PTFE) Super Lube 21010 is a Prusa Research approved lubricant. Use on your Bondtech drive gears, Linear bearings or anywhere else you need a high quality...Price: $5.99 -
Synthetic Grease with SYNCOLON™ (PTFE) | 3oz
Super Lube
Price: $9.99Super Lube 21030 - Synthetic Grease with SYNCOLON™ (PTFE) This is a Prusa Research approved lubricant. Can be used on drive gears, Linear bearings or anywhere else you need a high quality grease...Price: $9.99 -
Terminal Block Header, 4P, 90° Right Angle, 5.08MM | Phoenix Contact
Phoenix Contact
Price: $2.954 Position, 90 Degree Right Angle, Terminal Block Header Includes: Header (1 pcs) Amps: 12Pitch: 5.08mmPrice: $2.95 -
Terminal Block Plug - 2 position | 5.08mm
On Shore Technology Inc.
Price: $1.99Terminal Block Plug 5.08mm Includes: Plug (1 pcs) Specs:2 position20 ampSafety approval: Shade of green may be different than photoPrice: $1.99 -
Terminal Block Plug - 4 Position | 5.08mm
PB Select™
Now: $2.49Regular Price: $3.95Terminal Block Plug 5.08mm Includes: Plug (1 pcs) Specs:4 position15 ampNow: $2.49Regular Price: $3.95 -
Terminal Block, Header, 4POS VERT 5.08MM | Phoenix Contact
Phoenix Contact
Price: $2.954 Position Vertical Terminal Block Header Includes: Header (1 pcs) Amps: 12Pitch: 5.08mmPrice: $2.95 -
Thermistor - R1/+ | Robo 3D
PB Select™
Price: $12.95PB Select™ Thermistor for Robo R1 Robo 3D R1+ replacement thermistor Note: It helps to use a zip tie to hold the thermistor wire close to the extruder or use this printable bracket to guide the wire. Includes: Thermistor (1...Price: $12.95 -
Tube Grease | Robo 3D
Robo 3D
Price: $3.99Tube Grease for lubing the rods and ball screws of your 3D printer. This is the same grease that comes stock with Robo 3D R1+/R2 printers. Includes: Grease (1 pcs) Size: 10gPrice: $3.99 -
X Carriage (No Bearings) R1+ | Robo 3D
Robo 3D
Price: $10.95Robo R1+ X Carriage Includes: Carriage (1 pcs) Fits: R1/R1+ Note: Does not include the linear bearings. Click here to purchase linear bearingsPrice: $10.95 -
X Carriage with Bearings - R1/+ | Robo 3D
Robo 3D
Price: $24.95Robo R1+ X Carriage with Bearings This is the bracket the extruder rides on. Includes: Carriage (1 pcs)Bearings (4 pcs) Fits:Robo R1Robo R1+ Note: this latest batch came bulk packaged, so there is minor scuffing on some of the plastic.Price: $24.95 -
Y Axis Pillow Block (Set of 2) - R1/+ | Robo 3D
Robo 3D
Price: $10.95Robo R1+ Y Axis Pillow Blocks Two complete sets. Hardware not included. Includes: Pillow block - top half (2 pcs)Pillow block - bottom half (2 pcs) Fits:Robo R1Robo R1+Price: $10.95