Satin PEI Powder Coated Spring Steel Sheet for MINI, MINI+ | Original Prusa

SKU:
PRUSA-SSS-0809-SATIN
Condition:
New
Availability:
Limited Stock
  • MINI Double-sided Powder-coated Satin Spring Steel Sheet
  • Satin PEI Powder Coated Spring Steel Sheet for MINI, MINI+ | Original Prusa
  • MINI Double-sided Powder-coated Satin Spring Steel Sheet
$44.95

Description

MINI Double-Sided Satin PEI Powder-Coated Spring Steel Sheet for Prusa MINI

The Satin Spring Steel Sheet further expands the Prusa line-up of print sheets. In terms of printing properties, the Satin sheet sits between the smooth and textured variants. Its powder-coated surface with lightly textured matte finish offers an optimal level of adhesion, especially when printing PLA and PETG materials. It is fully compatible with a wide range of common and less-common filaments, such as ABS, ASA, FlexFill 98A, Polycarbonate and more. A vast majority of materials can be printed without a separation layer (e.g. glue).

Polycarbonate - prints better on satin (compared to smooth and textured sheets) - when printing with PC often, glue stick layer is recommended to prevent possible damage to the sheet.

Filament compatibility

Attributes:

  • Suitable for both PLA and PETG
  • Lightly textured surface finish
  • No need for Windex for PETG
  • No need for glue stick with FlexFill 98A
  • Wide range of supported filaments, including advanced materials, for instance PC Blend
  • Easy maintenance and good adhesion qualities

Important:

  • Acetone causes the surface to quickly deteriorate
  • Prints from ASA, PC Blend require a brim / skirt / shield around the print
  • Live Z value needs to be readjusted if you switch sheets
  • DO NOT use sharp metal objects (e.g. a spatula) to remove the print!

WARNING:

Never clean the Satin powder-coated spring steel sheet with acetone! Doing so will create microfractures in the texture, which will make the surface deteriorate over time. Learn more about printing on the Satin powder-coated steel sheet in the Prusa knowledge base.

Note:

Consumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty (example of a cosmetic scratch that does not affect functionality). Only defective sheets on arrival are covered by warranty.

Fits:

  • Prusa MINI
  • Prusa MINI+

 

 

View AllClose

Additional Information

Category:
Build Plate
Category:
Print Surfaces
Fits:
Prusa MINI
Fits:
Prusa MINI+
View AllClose