Sidewinder X3 Pro

3D Print Removal Tool - Scraper Includes: Scraper (1 pcs)

3D Print Removal Tool - Scraper This is the model that comes with new Artillery printers. It can be used with any printer.  Includes: Scraper (1 pcs) Please Note: This is the latest version from Artillery and has a slightly...

Accelerometer Includes: Accelerometer (1 pcs) Fits: Sovol SV07Sovol SV07 Plus

Artillery Automatic Bed Leveling Sensor (ABL) Includes: ABL switch (1 pc) Fits: Sidewinder X3 ProSidewinder X3 PlusSidewinder X4 ProSidewinder X4 Plus

Bed Heater Includes: Heater (1 pcs)Magnet - installed (1 pcs) Voltage: 110 VAC Fits: Sidewinder X3 Pro

Belt Tensioner Pulley Assembly Includes: Belt Tensioner Assembly (1 pcs) Fits: Sidewinder X3 ProSidewinder X3 PlusSidewinder X4 ProSidewinder X4 Plus Note: Tension bolt not included

Boron Nitride Thermal Paste (BN Paste) Thermal paste improves heat conduction and heat distribution in the hotend. Contains high quality ZYP™ Boron Nitride and proprietary binders which reduce cracking and flaking when dried...

Spool Holder Bracket  Includes: Bracket (1 pcs) Fits: Sidewinder X3 ProSidewinder X3 Plus Note: Does not include mounting hardware or spool holder.

Brass Nozzle Includes: Nozzle (1 pcs)  Size: (Select Above) Fits: Sidewinder X3 ProSidewinder X3 PlusSidewinder X4 ProSidewinder X4 Plus

Brim Scraper (Mini Scraper) We find this tool handy for removing the brim, and purge lines from the build plate. Includes: Brim Scraper (1 pcs)

Cable for Accelerometer Includes: Cable (1 pcs) Fits: Sovol SV07Sovol SV07 Plus

Cable for Filament Sensor Includes: Cable (1 pcs) Length: 710mm  Fits: GeniusGenius ProSidewinder X3 Pro

Cable for Filament Sensor Includes: Cable (1 pcs) Fits: Sidewinder X3 Pro

3D Print Cleanup Tool This deburring tool is great for cleaning the brim off the long, straight edges of your 3D prints. We find it easier to use than an Exacto knife, because the blade doesn't dig into the plastic print as easily. The swivel head makes...

Extruder Adapter Board (Breakout Board) Installs on the extruder. Connects to the X axis adapter board and extruder components.  Includes: Adapter board (1 pcs) Location: Extruder Fits: Sidewinder X3 ProSidewinder X3 Plus

Artillery - 420mm, 24 Pin FFP Cable for Extruder PCB  Board Runs from extruder adapter board to X axis adapter board  Includes: Cable (1 pcs) Length: 420mmPins: 24 Fits:GeniusGenius ProSidewinder X3 Pro  

Extruder Mechanism - Filament Feeder This part contains the gears that drive the filament. It is also called a filament feeder or drive gear box.  Includes: Extruder Mechanism (1 pcs) Fits: Sidewinder X3 ProSidewinder X3 Plus

Heatsink Fan This fan is also called the hotend fan. It cools the hotend heatsink.  Includes: Fan (1 pcs) Fits: Sidewinder X3 ProSidewinder X3 Plus

Print Cooling Fan This fan is also called a blower fan or part cooling fan. It cools the part being printed.  Includes: Fan (1 pc) Fits: Sidewinder X3 ProSidewinder X3 Plus

Artillery Filament Runout Sensor Includes: Filament sensor (1 pc) Fits:Sidewinder X3 ProSidewinder X3 PlusSidewinder X4 ProSidewinder X4 Plus

Gold Finger Flat Cable This cable runs up the Z column to the X axis breakout board.  Adessive backed for easy installation. Includes: Cable (1 pc) Fits: Sidewinder X3 Pro Note: Does not come with the cloth tape the...

Flexible Build Plate Surface is powder-coated, textured PEI. The textured surface gives the bottom of your prints a nice textured look and helps hide imperfections. To use: Allow print surface to cool, remove and flex the sheet...

Flush Cut Trimmers Also called side cutters. We use these trimmers for cutting filament, removing supports and cleaning up prints.  Includes: Trimmers (1 pc)

Titanium Heat Break Connects the the hotend heatsink to the heater block. Includes: Heat Break (1 pcs) Fits: Sidewinder X3 ProSidewinder X3 PlusSidewinder X4 ProSidewinder X4 Plus

Heater Block Sometimes called a hot block or heating block.  Includes: Heater Block (1 pcs) Fits: Sidewinder X3 ProSidewinder X3 PlusSidewinder X4 ProSidewinder X4 Plus Note: Does not include the retaining clip for holding the...

Retaining Clip for Heater Block This clip holds the heater and thermistor in place on the heater block. Includes: Clip (1 pcs) Fits: Sidewinder X3 ProSidewinder X3 Plus

Artillery Hotend Assembly (Hotside)  This is a replacement stock hotend assembly for the Artillery Sidewinder X3 and X4 printers. It is sometimes called a nozzle assembly.  Includes: Heatbreak (1 pcs)Heater cartridge (1...

Hotend Heater Heats the heater block, Includes: Heater (1 pcs) Fits: Sidewinder X3 ProSidewinder X3 PlusSidewinder X4 ProSidewinder X4 Plus

Hotend Mounting Screws These go through the heatsink and hold the hotend to the extruder. The heads of these screws are a little larger and will not strip as easily as the stock screws.  Includes: Screw (2 pcs) Size: M3Length:...

Hotend Thermistor Measures the temperature of the nozzle, Includes: Thermistor (1 pcs) Fits: Sidewinder X3 ProSidewinder X3 PlusSidewinder X4 ProSidewinder X4 Plus

X Axis Limit Switch Sometimes called an endstop sensor Includes: Limit switch (1 pcs) Location: X Axis  Fits: Sidewinder X3 ProSidewinder X3 Plus

Y Axis Limit Switch Sometimes called an endstop sensor Includes: Limit switch (1 pcs) Location: Y Axis  Fits: Sidewinder X3 ProSidewinder X3 Plus

Artillery Mainboard Also called the control board or motherboard. Includes: Mainboard (1 pcs) Fits: Sidewinder X3 Pro Notes: Comes with X3 Pro firmware installed.

PB Select Nozzle Coat™  Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block...

Nozzle Wrench Handy little wrench for removing nozzles. Includes: Wrench (1 pcs) Sizes: 7.0 mm (RepRap, E3D, Nextruder Etc)5.5 mm5.0 mm4.5 mm (Sidewinder X3/X4) Fits:E3D V6 NozzlesPrusa Nextruder standard and highflow nozzles7mm RepRap...

Artillery Print Head Assembly (Hotend/Extruder) Includes: Print Head (1 pc) Fits:Sidewinder X3 ProSidewinder X3 Plus

Artillery PTFE Tube This is the PTFE tube that installed between the extruder and hotend.  Note: This is a general length tube and will need to be cut to size for your specific printer. We recommend this cutter for a straight clean cut...

PTFE Tube Goes in the extruder/hotend. Includes: PTFE tube (1 pcs) Length: 45mm  Fits:Sidewinder X3 ProSidewinder X3 PlusSidewinder X4 ProSidewinder X4 Plus

Artillery Roller Wheel (Also Called a POM Wheel) Used on the X axis carriage Includes: Wheel with Bearings (1 pcs) Fits: Sidewinder X1Sidewinder X2Sidewinder X3 ProGeniusGenius Pro

Silicone Sock Sometimes called a silicone boot.  Includes: Silicone sock (1 pcs) Fits: Sidewinder X3 ProSidewinder X3 PlusSidewinder X4 ProSidewinder X4 Plus

Spool Holder & Bracket  Includes: Spool holder (1 pcs)Bracket (1 pcs) Fits: Sidewinder X3 ProSidewinder X3 PlusSidewinder X4 ProSidewinder X4 Plus Note: Does not include mounting hardware.

Filament Spool Holder Includes: Spool Holder (1 pcs) Fits: Sidewinder X3 ProSidewinder X3 Plus Note: Does not include spool holder bracket.

Extruder Stepper Motor Includes: Stepper motor (1 pcs)Spur gear - installed (1 pcs) Location: Extruder  Fits: Sidewinder X3 ProSidewinder X3 Plus

X Axis Stepper Motor Includes: Stepper motor (1 pcs) Location: X Axis  Fits: Sidewinder X3 ProSidewinder X3 Plus

Y Axis Stepper Motor Includes: Stepper motor (1 pcs) Location: Y Axis  Fits: Sidewinder X3 Pro

Z Axis Stepper Motor Includes: Stepper motor (1 pcs) Location: Z Axis  Fits: Sidewinder X3 ProSidewinder X3 Plus Note: Does not include leadscrew or coupling

  Super Lube 82340 - Synthetic Grease with SYNCOLON™ (PTFE)  This small size pouch is great for lubing the filament drive gears on dual gear or orbiting gear extruders. Includes: 1 Pouch Size: 1 cc Contains no...

  Super Lube 21010 - Synthetic Grease with SYNCOLON™ (PTFE)  Super Lube 21010 is a Prusa Research approved lubricant.   Use on your Bondtech drive gears, Linear bearings or anywhere else you need a high quality...

  Super Lube 21030 - Synthetic Grease with SYNCOLON™ (PTFE)  This is a Prusa Research approved lubricant.   Can be used on drive gears, Linear bearings or anywhere else you need a high quality grease...

TFT Touch Screen Assembly Includes: Touch screen assembly (1 pc)Connection cable (1 pc) Fits: Sidewinder X3 ProSidewinder X3 Plus

X Axis Adapter Board (Breakout Board) Installs on the motor side of the X axis. Connects to the Z axis adapter board, extruder adapter board, X motor and X limit switch.  Includes: Adapter board (1 pcs) Location: X Axis Fits:...

Z Axis Adapter Board (Breakout Board) Installs near the lower left Z axis pillar. Connects to  the mainboard and X axis adapter board.  Includes: Adapter board (1 pcs) Location: Z Axis Fits: Sidewinder X3 ProSidewinder X3 Plus