Slice Engineering

Slice Engineering

  • 25mm Fan for Mosquito Hot End - 12v

    PB3D

    $7.99
    12V Dual Ball Bearing 25mm Fan for Slice Mosquito Hotend 12 volt (find the 24 volt fan here)  3.64 CFM Molex connector Hardware included - mount directly to your Slice Mosquito or Mosquito Magnum hot end
    SKU:
    PBX-FAN-J24B2510H-12-B
    $7.99
  • 25mm Slice Engineering fan

    25mm Fan for Mosquito Hot End - 12v | Slice Engineering

    Slice Engineering

    $9.95
     Slice Engineering Fan for Mosquito Hot End Fits: the Slice Mosquito Hot End and Mosquito Magnum (hardware included) 25mm 12 volt (find the 24 volt fan here) 3.64 CFM  Molex™ Micro-Fit connector
    SKU:
    SLICE-FAN-12V
    $9.95
  • Fan for Mosquito Hotend

    25mm Fan for Mosquito Hot End - 24v

    PB3D

    $7.99
    24V Dual Ball Bearing 25mm Fan for Slice Mosquito Hotend 24 volt (find the 12 volt fan here)  3.64 CFM Molex connector Hardware included - mount directly to your Slice Mosquito or Mosquito Magnum hot end 
    SKU:
    PBX-FAN-J24B2510H-24-B
    $7.99
  • ZYP™ Boron Nitride Thermal Paste

    Boron Nitride Thermal Paste | Slice Engineering

    Slice Engineering

    $9.95
    ZYP™ Boron Nitride Thermal Paste from Slice Engineering One 5 cc syringe  Applicator included Thermal paste improves heat conduction and heat distribution Boosts heat dissipation from the hot section of the heater...
    SKU:
    SLICE-BNPASTE-5CC
    $9.95
  • Groove Mount for Mosquito Hotend

    Groove Mount Adapter for Mosquito Hotend

    PB3D

    $7.95
    Grove Mount Adapter for Mosquito Hotend This mount attaches directly to your Mosquito Hotend and will allow it to be mounted to a Bondtech QR, BMG or anywhere an E3D style hotend would mount. Only for a direct drive setup, not compatible with...
    SKU:
    PBX-ADPT-MSQGRV
    $7.95
  • Heat Break for Mosquito Hotend - Slice Engineering

    Heat Break for Mosquito Hotend | Current Version

    Slice Engineering

    $34.95
    Replacement Heat Break for Mosquito Standard Hotend (current version) Composite, bi-metallic construction makes this the thinnest, highest performing heat break in production. Fits Standard Mosquito Hotend™ (current version) Note: This will...
    SKU:
    SLICE-HB-MOS-V2
    $34.95
  • Heat Break for Mosquito Hotend - Slice Engineering

    Heat Break for Mosquito Hotend | Retired Version

    Slice Engineering

    $34.95
    Replacement Heat Break for Mosquito Standard Hotend - Retired Version Composite, bi-metallic construction makes this the thinnest, highest performing heat break in production. Fits Older Style Standard Mosquito Hotend™ Note: This will only...
    SKU:
    SLICE-HB-MOS
    $34.95
  • Heat Break for Mosquito Magnum Hotend - Slice Engineering

    Heat Break for Mosquito Magnum Hotend | Current Version

    Slice Engineering

    $44.95
    Replacement Heat Break for Mosquito Magnum Hotend - Current Version Composite, bi-metallic construction makes this the thinnest, highest performing heat break in production. Fits Standard Mosquito Hotend™ (current version) Note: This will...
    SKU:
    SLICE-HB-MOSMAG-V2
    $44.95
  • Mosquito Magnum Heat Break - Slice Engineering

    Heat Break for Mosquito Magnum Hotend | Retired Version

    Slice Engineering

    $44.95
    Replacement Heat Break for Mosquito Magnum Hotend - Retired Version Composite, bi-metallic construction makes this the thinnest, highest performing heat break in production. Fits Mosquito Magnum Hotend™ Retired Version Note: This will only fit...
    SKU:
    SLICE-HB-MAG
    $44.95
  • HeatSink for Mosquito Hotend

    Heat Sink for Mosquito Hotend | Current Version

    Slice Engineering

    $39.95
    Replacement Heat Sink for Mosquito Hotend - Current Version PLEASE NOTE: This is the CURRENT version of the heatsink and only works on the current version Mosquito hotend. Use the visual reference below to determine if this is the correct heatsink for...
    SKU:
    SLICE-HSINK-V2
    $39.95
  • HeatSink for Mosquito Hotend

    Heat Sink for Mosquito Hotend | Retired Version

    Slice Engineering

    $39.95
    Replacement Heat Sink for Mosquito Hotend - Retired Version PLEASE NOTE: This is the retired version of the heatsink and only works on the older version Mosquito hotend. Use the visual reference below to determine if this is the correct heatsink for...
    SKU:
    SLICE-HSINK
    $39.95
  • Slice Engineering 12V 50W Heater Cartridge

    Heater Cartridge 12v 50W | Slice Engineering

    Slice Engineering

    $19.95
    50 Watt Heater Cartridge by Slice Engineering 12 volt (find the 24 volt here) 22 mm. diameter sized to fit into a 6 mm H7 tolerance hole 1 meter lead included Genuine Molex™ connectors 
    SKU:
    SLICE-HEATER-12V-50W
    $19.95
  • 50 Watt Heater Cartridge Slice

    Heater Cartridge 24v 50w | Slice Engineering

    Slice Engineering

    $22.95
    24 Volt, 50 Watt Heater Cartridge 24 volt (find the 12 volt here) 50 Watt 1 meter lead included 22 mm diameter to fit 6 mm H7 hole Molex™ Micro-Fit 3.0 connectors  
    SKU:
    SLICE-HEATER-24V
    $22.95
  • Mosquito Heater block

    Hot Block for Mosquito Hotend | Slice Engineering

    Slice Engineering

    $59.95
    Replacement Hot Block for Mosquito Hotend   Replacement hot block for the standard Mosquito™ and Mosquito Magnum™ hotend variants High-grade copper construction Plastic-repellent coating Precision CNC...
    SKU:
    SLICE-HBLOCK
    $59.95
  • Hot Block Hardware for Mosquito Hotend | Slice Engineering

    Slice Engineering

    $5.95
    Hardware for mounting the hot block to the heat sink in the Mosquito or Mosquito Magnum hotends. Thin walled stand-off tubes reduce conductive heat flow proximally from the hot block Made in USA Includes: Thin walled stand-off...
    SKU:
    SLICE-HBLOCK-HDWR
    $5.95
  • Mosquito Hot End - Latest Version

    Mosquito Hotend - New Version | Slice Engineering

    Slice Engineering

    $144.95
    Mosquito Hotend from Slice Engineering Includes: Mosquito Hotend (latest version, with coated heat break) Mounting Kit Hex Keys Be sure to select a 12v or 24v fan above, if needed. Installation instructions Mosquito assembly disassembly...
    SKU:
    SLICE-HOTEND
    $144.95
  • Slice Engineering Mosquito Magnum

    Mosquito Magnum Hotend - New Version | Slice Engineering

    Slice Engineering

    Regular Price: $169.99
    $164.95
    Mosquito Magnum Hotend from Slice Engineering Newly updated Mosquito™ Magnum (latest version, with coated heat break) The Mosquito Magnum is best for nozzle sizes 0.40mm or larger. You can use a smaller nozzle, but it will be more difficult...
    SKU:
    SLICE-HOTEND-MAG
    Regular Price: $169.99
    $164.95
  • 3D Printer Nozzle Torque Wrench from Slice Engineering

    Nozzle Torque Wrench | Slice Engineering

    Slice Engineering

    $24.99
    1.5nm Nozzle Torque Wrench from Slice Engineering Designed for Slice Engineering Vanadium Nozzles™  Also fits E3D style and RepRap nozzles Achieve a proper seal without over tightening This 1/4 inch nozzle torque wrench is just a tad...
    SKU:
    SLICE-NOZZLE-WRENCH
    $24.99
  • Hardened Steel Nozzle fits E3D style

    RepRap Nozzle - Slice Engineering Vanadium HT Hardened Steel - 0.40mm

    Slice Engineering

    $34.99
    Vanadium HT Hardened Steel RepRap Nozzle 0.40mm orifice 1.75mm filament Lifetime warranty against abrasion Wear resistant, plastic repellent coating High speed steel, hardened and tempered to 64 Rockwell C. E3D compatible  Would you...
    SKU:
    SLICE-VHT-HS-NOZZLE-040
    $34.99
  • Slice Engineering nozzle

    RepRap Nozzle - Slice Engineering Vanadium HT Hardened Steel - 0.80mm

    Slice Engineering

    $34.99
    Vanadium HT Hardened Steel RepRap Nozzle 0.80mm orifice 1.75mm filament Lifetime warranty against abrasion Wear resistant, plastic repellent coating High speed steel, hardened and tempered to 64 Rockwell C. E3D compatible   Would...
    SKU:
    SLICE-VHT-HS-NOZZLE-080
    $34.99
  • Silicone Sock for Mosquito Style Hotend

    PB3D

    $7.99
    Silicone Insulating Sock for Mosquito Hotend Fits: Slice Engineering Mosquito hot block Max temp 300c Sold in units of 1 Please note: This is not made by Slice Engineering
    SKU:
    PBX-SILSOCK-MOSQ-BLK
    $7.99
  • Slice Engineering High Temp Thermistor

    Thermistor - High Temperature | Slice Engineering

    Slice Engineering

    $39.95
    High Temperature Thermistor by Slice Engineering Length: 15mm, diameter: 3mm (standard for sleeved thermistors) Easy to install and easy to remove, with Molex™ Micro Fit 3.0 connectors  Eliminates the need for high temperature RTD's or...
    SKU:
    SLICE-THERMISTOR
    $39.95
  • Threaded Stem Adapter for Mosquito Hotend

    Threaded Stem Adapter | Slice Engineering

    Slice Engineering

    $29.99
    Threaded Stem Adapter CNC machined adapter - fits many common printers such as: Craftbot+, Craftbot 2, Craftbot XL Printers equipped with Mk7, Mk8 and Mk9 extruders Includes: M6x1.0 machined threaded stem M6x1.0 nut with captive...
    SKU:
    SLICE-ADAPT-M6X1-175
    $29.99