Slice Engineering & Compatible

Boron Nitride Thermal Paste (BN Paste) Thermal paste improves heat conduction and heat distribution in the hotside and coldside. Contains high purity Boron Nitride and proprietary binders which reduce cracking and flaking when dried...

  Slice Engineering Extension Cable for Fan or Thermistor Includes: Cable (1 pcs) Specifications:1 meter longEnd A: Molex Micro-Fit 3.0 connectorEnd B: Dupont style connector

Slice Engineering Copperhead Heat Break for Prusa MINI/MINI+ The Copperhead Prusa MINI heat break is bimetallic, made of a copper outer body and an interior steel needle, which gives this heat break better cooling performance, allowing for a...

Slice Engineering Copperhead™ Heat Break for MK10 Bimetallic Heat Break™ - Stainless steel and Copper AlloyRated to 450 °C For more documentation on the Copperhead™ Heat Break, please see the Technical Specifications...

Copperhead™ Heat Break for Creality 3D Printers Bimetallic Heat Break™ - W2S (Tungsten Disulfide) plated stainless steel and copper alloy Rated to 450 °C For more documentation on the Copperhead™ Heat Break, please...

Slice Engineering Copperhead™ Heat Break for RepRap 3D Printers Bimetallic Heat Break™ -  W2S (Tungsten Disulfide) plated stainless steel and copper alloyRated to 450 °C For more documentation on the...

PB Select Nozzle Coat™  Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block...

Prusa Mini Copperhead Hotend Upgrade Kit from Slice Engineering This all-in-one, plug-and-play upgrade takes your 3D printing to the next level by eliminating heat creep, preventing clogs, and speeding up 3D print times. Featuring the revolutionary...

PB Select™ Silicone Sock for Mosquito Hotend The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature, reducing the amount of times your heater needs to cycle. As an added benefit, the silicone sock will...

Sock-X  Hotend not included This premium silicone sock can handle printing temps of up to 300c. Designed specifically for the Slice Copperhead.  The primary purpose of a silicone sock is to help keep your hotend at a more consistent...

Socket Adapter for Slice Engineering Torque Wrench This adapter allows for the use of 1/4 inch sockets with the Slice Engineering Nozzle Torque Wrench. With this adapter you can use the torque wrench with different size nozzles by using...

Slice Engineering 300°C Thermistor Includes:Thermistor (1 pcs)Dowel pin (1 pcs) Features: 2m long bare leads15mm long, 3 mm diameter cartridge. A standard for sleeved thermistorsCapable of reading from room temperature up to...