SV07

3D Print Removal Tool - Scraper Includes: Scraper (1 pcs)

Hotend Air Duct for SV06 Plus Directs airflow to the part being printed Includes: Air duct (1 pcs) Fits: SV06 PlusSV07SV07 Plus

Blower Fan This fan is used as the print cooling fan or the hotend heatsink cooling fan.  Includes: Fan (1 pcs) Specifications:Size: 40x40x10mmVoltage: 24vdc Fits: SV06 SV06 PlusSV07SV07 Plus Notes: Only one fan is...

Boron Nitride Thermal Paste (BN Paste) Thermal paste improves heat conduction and heat distribution in the hotend. Contains high quality ZYP™ Boron Nitride and proprietary binders which reduce cracking and flaking when dried...

Brim Scraper (Mini Scraper) We find this tool handy for removing the brim, and purge lines from the build plate. Includes: Brim Scraper (1 pcs)

Build Plate Heater for SV07 Includes: Aluminum bed heater (1 pcs)Magnetic sheet - installed on bed heater (1 pcs) Fits: SV07 Note: Does not include build plate/print surface or mounting hardware.

LED Cable Connects from extruder board to extruder LED board Includes: Cable (1 pcs) Fits: SV07SV07 Plus

Drive Pulley for X or Y Axis Includes: Pulley (1 pcs)Set screw (2 pcs) Location: X or Y Motor Fits: SV06SV06 PlusSV07SV07 Plus

3D Print Cleanup Tool This deburring tool is great for cleaning the brim off the long, straight edges of your 3D prints. We find it easier to use than an Exacto knife, because the blade doesn't dig into the plastic print as easily. The swivel head makes...

Extruder Adapter Board Includes: Extruder adapter board (1 pcs) Fits:SV07SV07 Plus

Extruder Assembly for Sovol SV07 and SV07 Plus Includes: Extruder assembly (1 pcs) Fits: SV07SV07 Plus

Extruder Drive Gear This drive gear works as either the drive or driven gear. If you are replacing both drive gears, order two.  Includes: Drive gear (1 pcs) Fits: SV06SV06 PlusSV07SV07 Plus Note: Requires two M3x3 set...

Extruder Stepper Motor Includes: Stepper motor with gear (1 pcs) Fits: SV06SV06 PlusSV07SV07 Plus

6020 Axial Fan This is the large fan located on the X carriage behind the print head. It cools the print during high speed printing.  Includes: Fan (1 pcs) Specifications:Size: 60x60x20mmVoltage: 24vdc Fits: SV07SV07 Plus

Filament Runout Sensor Includes: Sensor Switch (1 pcs) Fits: SV06 PlusSV07SV07 Plus

Build Plate (Print Surface) with Magnet Textured PEI powder coated on one side Includes: Build plate (1 pcs)Magnetic base with adhesive backing(1 pcs) Size: 235x235mm  Fits: SV07

Flush Cut Trimmers Also called side cutters. We use these trimmers for cutting filament, removing supports and cleaning up prints.  Includes: Trimmers (1 pc)

PB Select™ GT2 Stepper Motor Drive Pulley Recommended for use with Gates GT2/3 or other GT belts Includes: Idler pulley (1 pcs)Set screw (2 pcs) Fits: 6mm BeltTeeth: 20Width: 7mmBore: 5mmOuter diameter:15mm

Hardened Steel High Flow Nozzle Made of hardened steel for printing abrasive filaments.  Includes: Nozzle (1 pcs) Size: Select Above For: 1.75mm diameter filament Fits: SV06 PlusSV07SV07 Plus

Heater Block (Hot Block) Includes: Heater block (1 pcs) Fits: SV06 PlusSV07SV07 Plus Note: Does not include any installation hardware.

Hotend Heater Cartridge Heats the hotend Includes: Heater (1 pcs) Fits:SV06SV06 PlusSV07SV07 Plus

Hotend Assembly for SV06 Plus, SV07/Plus Includes: Heat break (1 pcs)Heater block (1 pcs)Heater cartridge (1 pcs)Thermistor (1 pcs)Silicon sock (1 pcs)M2.5x10 socket head cap screws (2 pcs)0.40mm nozzle (1 pcs) Fits: SV06 PlusSV07SV07 Plus

Hotend Fan Set Includes: Print cooling fan (1 pcs)Heatsink fan (1 pcs) Fits: SV06SV07SV07 Plus

LED Light (PCB Board) for Extruder Aluminates the part being printed.  Includes: Led light board(1 pcs) Fits: SV07SV07 Plus

Mainboard (Motherboard) for Sovol SV07 This silent mainboard comes with firmware loaded. Includes: Mainboard (1 pcs) Fits: SV07

Nylon Mounting Pins for Extruder LED Light Nylon fasteners for mounting the LED light board to the extruder cover. Includes: Nylon pins (3 pcs) Fits: SV07SV07 Plus

Brass High Flow Nozzle Includes: Nozzle (1 pcs) Size: 0.40mm  For: 1.75mm diameter filament Fits: SV06 PlusSV07SV07 Plus

PB Select Nozzle Coat™  Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block...

Hardened Steel High Flow Nozzle Set Made of hardened steel for printing abrasive filaments.  Includes: 0.40mm Nozzle (2 pcs)0.60mm Nozzle (2 pcs)0.80mm Nozzle (1 pcs)1.00mm Nozzle (1 pcs) Sizes: 0.40mm  0.60mm  0...

Roller Wheel (X/Y Carriage Roller Wheel) Includes: Wheel with Bearings (1 pcs) Fits: SV07SV07 Plus

M3x3 Set Screw Includes: Set screw (5 pcs) 12.9 GradeCup point

Silicone Sock Includes: Silicone sock (1 pcs) Fits: SV06 PlusSV07SV07 Plus

L Shaped Socket Wrench Size: 6 mm Includes: Wrench (1 pcs)

Stepper Motor Includes: Motor (1 pcs) Fitment Locations:X or Y axis on the SV06, SV07X or Z axis on the SV07 PlusX axis on the SV06 Plus Fits: SV06 (X/Y axis)SV06 Plus (X axis) SV07 (X/Y axis)SV07 Plus (X/Z axis) 

  Super Lube 82340 - Synthetic Grease with SYNCOLON™ (PTFE)  This small size pouch is great for lubing the filament drive gears on dual gear or orbiting gear extruders. Includes: 1 Pouch Size: 1 cc Contains no...

  Super Lube 21010 - Synthetic Grease with SYNCOLON™ (PTFE)  Super Lube 21010 is a Prusa Research approved lubricant.   Use on your Bondtech drive gears, Linear bearings or anywhere else you need a high quality...

  Super Lube 21030 - Synthetic Grease with SYNCOLON™ (PTFE)  This is a Prusa Research approved lubricant.   Can be used on drive gears, Linear bearings or anywhere else you need a high quality grease...

Hotend Thermistor Includes: Thermistor (1 pcs) Fits:SV06SV06 PlusSV07SV07 Plus

Bed Leveling Thumb Nut  Also called a bed leveling wheel or thumb wheel. These are used for leveling the print bed on Sovol and many other 3D printer brands Includes: Bed leveling nut (1...

GT Timing Belt (X Axis) Includes: Timing belt (1 pcs) Location: X Axis Fits: SV07

GT Timing Belt (Y Axis) Includes: Timing belt (1 pcs) Location: Y Axis Fits: SV07

Main Board to Extruder and X Motor Cable (Wire Harness) Connects from mainboard to extruder and X motor Includes: Wire harness (1 pcs) Fits: SV07

  Creality Yellow Bed Leveling Spring Strong bed springs for Creality and other 3D printers. Fits most Creality printers that use bed springs.  Includes: Spring (1 pcs) Dimensions:Length: 30mm (un-sprung)OD: 8.2mmID:...