Description
E3D V6 Hotend Kit for Prusa - 24v
This kit requires assembly
This is a 24 Volt Hotend and is intended for use with the Prusa MK3 or MK3S
The Prusa-specific iteration of the E3D v6 HotEnd is intended as a drop-in replacement for your original Prusa i3 MK3 or MK3S printer. Ships with the standard v6 components, plus a Prusa-specific thermistor, heatbreak and 40W heater cartridge.
Please Note: this hotend does not come with the specific PTFE used by Prusa. Please retain the PTFE from your existing HotEnd. For reference, PTFE should look like this on the MK3S/MK2.5S and this on a MK3/MK2.5 MMU2
The Prusa v6 HotEnd offers the same all-metal, high-performance reliability of the v6, while swapping out several of E3D's standard components with Prusa-specific parts. These include a 40W heater cartridge for increased power, a longer thermistor and a heatbreak with Prusa-specific internal geometries - designed to improve retractions with the Multi-Material upgrade.
Please Note: Do not use this hot end with 12V Prusas, such as the MK2 or MK2S. This will damage your printer.
https://e3d-online.dozuki.com/Guide/V6+Assembly/6