Wanhao i3

3D Print Removal Tool - Scraper Includes: Scraper (1 pcs)

All Metal Hotend Kit with Slotted Cooling Block for Wanhao i3 This upgrade includes a modified thermal barrier tube, nozzle and cooling block. The thermal barrier tube is made from 2 different materials: The lower thermal break is made from...

Boron Nitride Thermal Paste (BN Paste) Thermal paste improves heat conduction and heat distribution in the hotside and coldside. Contains high purity Boron Nitride and proprietary binders which reduce cracking and flaking when dried...

Brim Scraper (Mini Scraper) We find this tool handy for removing the brim, and purge lines from the build plate. Includes: Brim Scraper (1 pcs)

3D Print Cleanup Tool This deburring tool is great for cleaning the brim off the long, straight edges of your 3D prints. We find it easier to use than an Exacto knife, because the blade doesn't dig into the plastic print as easily. The swivel head makes...

Flush Cut Trimmers Also called side cutters. We use these trimmers for cutting filament, removing supports and cleaning up prints.  Includes: Trimmers (1 pc)

Slice Engineering Copperhead™ Heat Break for MK10 Bimetallic Heat Break™ - Stainless steel and Copper AlloyRated to 450 °C For more documentation on the Copperhead™ Heat Break, please see the Technical Specifications...

Heat Break (Thermal Tube) for Microswiss MK10 All Metal Hotend Kits This is a replacement heat break for the Microswiss MK10 All Metal Hotend Kit. Includes: Heat break (1 pcs) Thread: M7 Fits:Microswiss MK10 / MK11 HotendsFlashForge Creator...

PB Select™ Black Heatsink for Nema17 Stepper Motor Heatsink in black anodized aluminum to remove heat from desired component.Equipped with self-adhesive on the back for easy attachment. Includes: Heatsink (1 pcs) Size: 40x40x10 mm

MK10 All Metal Hotend Kit - Microswiss The Microswiss all metal hotend allows you to print at much higher temperatures than with PTFE-lined hotend.  All metal hotends offer more consistent melt chamber control. During slow extrusion rates...

MK10 Brass Nozzle for PTFE Lined Hotend Includes: Nozzle (1 pcs) Size: Select Above Fits:Flashforge Guider 2 (not high temp version)Flashforge InventorFlashforge Inventor 2SFlashforge Creator ProFlashforge Creator MaxFlashforge...

MK10 Brass Nozzle (for Microswiss All Metal Hotend Only) Note: Will not fit the stock PTFE lined hotend. This nozzle has completely different internal dimensions to work with the Microswiss thermal barrier tube...

Microswiss MK10 Wear-Resistant (A2 Tool Steel) Nozzle for Microswiss All Metal Hotend Kit  Perfect for printing abrasive material, such as carbon fiber, metal filled, wood-filled, glow in the dark, etc. *Note: This...

MK10 Plated Wear-Resistant Nozzle for Microswiss All Metal Hotend Kit If you are printing abrasive material, such as carbon fiber, stainless steel, wood-filled or any other metal filled filaments, this will greatly improve the life of your...

MK10 Plated Wear-Resistant Nozzle for PTFE-Lined Hotend  This nozzle is for PTFE lined hotends only. It has a larger diameter hole in the top, so the PTFE tube can slide into the nozzle. It will not work with all metal hotends...

PB Select Nozzle Coat™  Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block...

  Super Lube 82340 - Synthetic Grease with SYNCOLON™ (PTFE)  This small size pouch is great for lubing the filament drive gears on dual gear or orbiting gear extruders. Includes: 1 Pouch Size: 1 cc Contains no...

  Super Lube 21010 - Synthetic Grease with SYNCOLON™ (PTFE)  Super Lube 21010 is a Prusa Research approved lubricant.   Use on your Bondtech drive gears, Linear bearings or anywhere else you need a high quality...

  Super Lube 21030 - Synthetic Grease with SYNCOLON™ (PTFE)  This is a Prusa Research approved lubricant.   Can be used on drive gears, Linear bearings or anywhere else you need a high quality grease...

  *Clearance item - no returns Bondtech Extruder Bracket for Wanhao i3 Plus Custom bracket, 2 mm laser cut steel and powder coated in black finish. Includes: Bracket (1 pcs) Note: this mounting bracket is not compatible with the Wanhao...