Bondtech & Compatible

Bondtech & Compatible

  • BMG Alu-Mount

    BMG Aluminum Mount | Bondtech

    Bondtech

    Price: $15.00
    This mount for the BMG extruder is CNC machined to precise tolerances in 3 mm thick aluminum, assuring a secure and stable mounting for your extruder.
    Price: $15.00
  • Bondtech BMG Extruder with Gear

    BMG Extruder - Standard (Right Hand) | Bondtech

    Bondtech

    Price: $80.00
    Bondtech BMG Extruder - Right Hand For 1.75 mm diameter filament only This extruder is sold without motor Please note the orientation of the motor gear in the photo The extruder can use any Nema17 motor with a standard 5 mm shaft E-step value:...
    Price: $80.00
  • Bondtech BMG-M

    BMG-M Extruder for Slice Mosquito Hotend | Bondtech

    Bondtech

    Price: $80.00
    Bondtech BMG-M Extruder for Slice Engineering Mosquito Hotends For 1.75mm filament Optimized for the Slice Engineering Mosquito and Mosquito Magnum hotends High performance and resolution with low weight Bondtech's precise Dual-Drive...
    Price: $80.00
  • Bondtech BMG-M

    BMG-M Extruder Mirrored (Left Hand) | Bondtech

    Bondtech

    Regular Price: $89.95
    Price: $80.00
    Bondtech BMG-M Mirrored Extruder for Slice Engineering Mosquito Hotends Left hand version (Mirrored) For 1.75mm filament Optimized for the Slice Engineering Mosquito and Mosquito Magnum hotends High performance and resolution with low...
    Regular Price: $89.95
    Price: $80.00
  • On Sale
    Bondtech BMG X2 18 C-C

    BMG-X2 Extruder C-C of 18.00 | Bondtech

    Bondtech

    Now: $124.95
    Price: $134.95
    Bondtech BMG-X2 Extruder C-C of 18.00 Please Note: Extruder mounts not included. If you need the aluminum mounts, click here.  Additional Info:A short piece (38mm long) of 4mm PTFE tube is used to guide the filament into the hotend...
    Now: $124.95
    Price: $134.95
  • Bondtech BMG X2 18 C-C

    BMG-X2 Extruder C-C of 20.00 | Bondtech

    Bondtech

    Price: $134.95
    Bondtech BMG-X2 Extruder - C-C distance of 20.00 Please Note: Extruder mounts not included. If you need the aluminum mounts, click here.  Additional Info: A short piece (38mm long) of 4mm PTFE tube is used to guide the filament...
    Price: $134.95
  • Bondtech Bowden Adapter - 1.75mm

    Bowden Adapter Direct - 4mm | Bondtech

    Bondtech

    Price: $8.00
    Adapter Direct - Bowden for 1.75mm diameter filament CNC-machined in aluminum, anodized black, with a mounted 4mm push-fit connector. Use this adapter in the groove mount where the hot-end is located to fit your Bowden tube - see center image below...
    Price: $8.00
  • Bondtech Bowden Adapter - 3mm

    Bowden Adapter Direct - 6mm | Bondtech

    Bondtech

    Price: $8.00
    Adapter Direct - Bowden for 3mm diameter filament CNC-machined in aluminum with a mounted push-fit connector for 6mm tube. Use this adapter in the groove mount where the hot-end is located to fit your Bowden tube - see center image below.
    Price: $8.00
  • Bondtech Dupont Cable

    Cable - Dupont | Bondtech

    Bondtech

    Price: $3.49
    Bondtech Dupont Cable Dupont cable 4-pin connector to 6-pin connector. This cable is by default wired for the Bondtech 40mm geared Nema17 motor. Please make sure that it follows the schematics for your application. Controller Side   ...
    Price: $3.49
  • BONDTECH Dupont Cable with Latch

    Cable - Dupont with Latch | Bondtech

    Bondtech

    Price: $3.99
    Bondtech Stepper Motor Cable Length: 0.7 meter Connectors: 4-pin Dupont with lock to JST-XH6 6 pin. This cable is by default wired for the Bondtech 40 mm geared Nema17 motor. Please make sure that it follows the schematics for your application...
    Price: $3.99
  • BONDTECH JST-XH4 Cable

    Cable - JST-XH4 | Bondtech

    Bondtech

    Price: $2.99
    Bondtech JST-XH4 Cable JST-XH4 4-pin connector to JST-XH6 6-pin connector. This cable is by default wired for the Bondtech 40mm geared Nema17 motor. Please make sure that it follows the schematics for your application. Controller side   ...
    Price: $2.99
  • BONDTECH PC2510 Cable

    Cable - PC2510 to JST-XH6 | Bondtech

    Bondtech

    Price: $3.99
    Bondtech PC2510 to JST-XH6 Cable PC2510 4-pin connector to JST-XH6 6-pin connector. This cable is by default wired for the Bondtech 40mm geared Nema17 motor. Please make sure that it follows the schematics for your application. Controller side ...
    Price: $3.99
  • Bondtech Creality CR-10 Extruder Kit with mount

    Creality CR-10 Extruder Upgrade Kit with Mount | Bondtech

    Bondtech

    Price: $85.00
    Bondtech Extruder Upgrade Kit for Creality CR-10 (mount included) This extruder upgrade kit for the Creality CR10, Ender, Tevo Tornado and other printers that uses the same type of mounting plate will replace the original feeder. This kit contains...
    Price: $85.00
  • On Sale
    Bondtech Creality Extruder Kit with mount for filament sensor

    Creality CR-10S Extruder Upgrade Kit with Mount | Bondtech

    Bondtech

    Now: $79.95
    Price: $90.00
    Bondtech BMG Extruder Upgrade Kit for Creality CR-10S with Mount The Bondtech extruder allows for a more reliable printing with all sorts of filaments and the Dual Drive system ensures that the extruder never looses grip of the filament.  This...
    Now: $79.95
    Price: $90.00
  • DDS Main Cable Assembly

    DDS Main Cable Assembly - Gen 2 DDS | Bondtech

    Bondtech

    Price: $39.95
    DDS Main Cable Assembly Fits: 2nd Generation DDS for CR-10S Length: 120 cm Includes 1x DDS main cable with: Molex micro-fit male plugs for Heater and Thermistor cartridges JST contact plugs, male, for axial and radial fans...
    Price: $39.95
  • Bondtech DDX Micro Swiss Mount

    DDX Adapter For Micro Swiss All-Metal Hotend | Bondtech

    Bondtech

    Price: $9.95
    DDX Adapter For Micro Swiss All-Metal Use a Micro Swiss All Metal hotend with the Bondtech DDX. Part is SLS printed in PA12 (Nylon) Requires DDX extruder v2 or later. This part is necessary to install a Micro Swiss All Metal hotend on a DDX...
    Price: $9.95
  • DDX Adapter Set For Creality Ender-3 / CR-10

    DDX Adapter Set For Creality Ender-3 / CR-10 | Bondtech

    Bondtech

    Price: $49.95
    DDX Adapter Set For Creality Ender-3 / CR-10 This set is necessary to install a DDX Upgrade Kit on the models listed below. Fits: Ender-3 CR-10 CR-10S CR-10 S4 CR-10 S5 Requires your printer to have a 40x40x10mm Radial Fan. When upgrading...
    Price: $49.95
  • Mosquito Thermistor Adapter

    DDX Thermistor Adapter - 3.0mm | Bondtech

    Bondtech

    Price: $3.99
    DDX Thermistor Adapter 3.0mm Use this adapter set to fit the Creality original thermistor into Slice Engineering's Copperhead™ or Mosquito™ Hot Block Please Note: Thermistor and hot block shown in picture are NOT included
    Price: $3.99
  • Bondtech Drive Gear Kit 1.75mm - 5.0mm

    Drive Gear Kit - 1.75/5.0mm | Bondtech

    Bondtech

    Price: $27.00
    Genuine Bondtech Drive Gear Kit 1.75mm/5.0mm Come as a set consisting of a primary drive gear, a secondary gear, bearings and a shaft. This kit is for 1.75 mm diameter filament and contains:  primary gear with inner diameter of 5mm secondary...
    Price: $27.00
  • Bondtech Drivegear Kit - 1.75/8.0

    Drive Gear Kit - 1.75/8.0mm | Bondtech

    Bondtech

    Price: $27.00
    Genuine Bondtech Drive Gear Kit - 1.75/8.0mm Drive gear kits come as a set consisting of a primary drive gear, a secondary drive gear, bearings and a shaft. This 1.75/8.0mm gear kit is for 1.75 mm diameter filament and contains:  Primary gear...
    Price: $27.00
  • Bondtech Drivegear Kit - 3.0/8.0

    Drive Gear Kit - 3.0/8.0mm | Bondtech

    Bondtech

    Price: $27.00
    Genuine Bondtech Drive Gear Kit - 3.0/8.0mm Drive gear kits come as a set consisting of a primary drive gear, a secondary drive gear, bearings and a shaft. This gear set is for 2.85/3mm diameter filament and contains a primary gear with inner...
    Price: $27.00
  • Extruder Body Rebuild Kit for MK2.5/3 Upgrade | Bondtech

    Extruder Body Rebuild Kit for MK2.5/3 Upgrade | Bondtech

    Bondtech

    Price: $29.95
    This Rebuild Set contains only the necessary parts to update the previous Bondtech Upgrade Kit for Prusa i3 MK2.5/3 to the MK3S design. This upgrade is necessary because the Prusa i3 MK3S feature a new integrated IR filament sensor that doesn’t...
    Price: $29.95
  • Bondtech Filament Guide (actual color of printed part may differ from photo)

    Filament Guide - 1.75mm and 3mm

    Bondtech

    Price: $2.00
    Filament Guide for a Bowden Tube-style configuration 1.75mm or 3mm available  Will be printed in a random color in premium PLA, ABS or PETG Fits in the underside of the QR and V2 extruder, helps with filament loading as it guides the...
    Price: $2.00
  • Bondtech Extruder Upgrade for Flashforge Creator Pro 2016

    Flashforge Creator Pro 2016 Extruder Upgrade Kit | Bondtech

    Bondtech

    Price: $185.00
    Bondtech Extruder Upgrade Kit for FlashForge Creator Pro 2016 Dual Nozzle This extruder upgrade kit for the Flashforge Creator Pro 2016 Dual Nozzle printer replaces your original feeders and coldblock. It allows for a more reliable printing...
    Price: $185.00
  • Bondtech Heatbreak for Prusa Mini

    Heat Break Kit for Prusa Mini - Stainless Steel | Bondtech

    Bondtech

    Price: $14.95
    Bondtech SS Heat-break Kit for Prusa Mini Solves the heat-creep Stainless Steel heat-break for the Prusa Mini. Solves the heat-creep issues revealed during the extensive testing Bondtech performed on the Prusa Mini. The adjusted length of the...
    Price: $14.95
  • Creality DDS 2 Heater Cartridge

    Heater Cartridge for DDS Gen 2 | Bondtech

    Bondtech

    Price: $9.95
    Replacement Heater Cartridge for DDS Gen II Fits: 2nd Generation DDS for CR-10S Includes: 1x 12v 40W Heater Cartridge with Molex micro-fit connector DDS Gen I and Gen II. What’s the difference? Please check differences between both...
    Price: $9.95
  • Heater Cartridge Repair Set for DDS Gen I

    Heater Cartridge Repair Set for DDS Gen 1 | Bondtech

    Bondtech

    Price: $9.95
    Heater Cartridge Repair Set for DDS Gen I Fits: 1st Generation DDS for CR-10S Included in this set: 1x 12v 40W Heater Cartridge 2x black nylon zip ties 8 cm of shrinking tube 11 cm of soldering wiring Step by Step Guide Please check how...
    Price: $9.95
  •  Heatsink for Nema 17 Stepper Motor

    Heatsink for Nema17 Stepper Motor - Aluminum

    PB3D

    Price: $2.49
    Aluminum Heatsink for Nema17 Stepper Motor Heatsink in silver aluminum to remove heat from desired component. Equipped with self-adhesive on the back for easy attachment. Fits: Nema17 stepper motors Dimensions: 40 x 40 x 10 mm
    Price: $2.49
  • Bondtech Heatsink for Nema 17 Stepper Motor

    Heatsink for Nema17 Stepper Motor | Bondtech

    Bondtech

    Price: $2.99
    Bondtech Heatsink for Nema17 Stepper Motor Bondtech OEM Heatsink in black anodized aluminum to remove heat from desired component.  Equipped with self-adhesive on the back for easy attachment. Fits: Nema17 stepper...
    Price: $2.99
  • Heavy Duty Push Fit Connector

    Heavy Duty All Metal Push-Fit Connector - 4mm

    PB3D

    Price: $4.49
    Heavy Duty Metal Push-Fit Connector  All Metal For 4mm Tube Thread G1/8″  Note: If you are having trouble with the Bowden tube popping out, click here and go to the Bowden tube section
    Price: $4.49
  • Bondtech M5x10 screw

    M5x10 Low Head Screw | Bondtech

    Bondtech

    Price: $0.89
    Bondtech M5x10 low head cap screw for Bondtech Extruders, to be used with the M5 thread inserts or similar. Sold in units of one
    Price: $0.89