Finder & Finder 2
Type in the filter box below to narrow down the Finder & Finder 2 parts you are looking for.
-
Flange Screw - M3x5 mm (Phillips Head)
PB Select™
Price: $0.59Flange Screw This screw is usually used to hold a bead thermistor in the heater block. Includes: Flange screw (1 pcs) Size: M3x5mmPrice: $0.59 -
3D Print Removal Tool - Red Handle Scraper
PB Select™
Price: $4.993D Print Removal Tool - Scraper Includes: Scraper (1 pcs)Price: $4.99 -
3D Print Removal Tool - Scraper
Flashforge
Price: $3.99Flashforge 3D Print Removal Tool Spatula for removing 3D prints from the build surface. This is the same tool that is provided with many of the new Flashforge 3D printers. Includes: Spatula (1 pcs)Price: $3.99 -
Air Duct Screw (M3x8 ) Guider 2/2S, Inventor 2, Finder, Robo E3 Pro - 2 Pack
PB Select™
Price: $0.79Air Duct Screw (M3x8) Guider 2/2S, Inventor 2, Finder Holds the plastic air duct in place. Includes: M3x8 screw (2 pcs) Fits:Guider 2Guider 2S HTInventor 2FinderRobo E3 ProPrice: $0.79 -
All Metal Hotend Kit for Flashforge Finder, Guider 2, Inventor 2 | Microswiss
Microswiss
Price: $37.75Microswiss All Metal Hotend Kit - 0.40mm Includes:0.40mm plated brass wear-resistant nozzle (1 pcs)Heat break (1 pcs)Jam nuts - to aid in removing old hotend (1 pcs) Description:The Microswiss all metal hotend allows you to print at much higher...Price: $37.75 -
Bed Leveling Bolt - 3 Pack - Inventor 2/S, Finder/2 | Flashforge
Flashforge
Price: $1.99Flashforge Bed Leveling Bolt - 3 Pack Includes: Bolts (3 pcs) Size: M3X45mm Fits: Inventor 2Inventor 2SFinderFinder 2 Note: Does not include Bed Leveling Thumb Nuts or Bed Leveling Springs.Price: $1.99 -
Bed Leveling Card | Flashforge
Flashforge
Price: $2.90Flashforge Bed Leveling Card Includes: Leveling card (1 pcs)Price: $2.90 -
Bed Leveling Sensor Switch - Guider 2/S HT, Inventor 2, Finder/2, Robo E3 Pro | Flashforge
Flashforge
Price: $12.95Flashforge Bed Leveling Sensor Switch Includes: Bed leveling sensor (1 pcs) Fits:Guider 2Guider 2S HTFinderFinder 2Inventor 2Inventor 2SRobo E3 Pro Note: This is the sensor only and does not include the arm or servo.Price: $12.95 -
Bed Leveling Servo Assembly - Finder 2, Inventor 2 | Flashforge
Flashforge
Price: $21.95Flashforge Servo Assembly Includes: Servo assembly (1 pcs)Limit switch (1 pcs)Bracket (1 pcs) Fits: FinderFinder 2Inventor 2Inventor 2SPrice: $21.95 -
Bed Leveling Thumb Nut - 3 Pack | Flashforge
Flashforge
Price: $5.99Flashforge Bed Leveling Thumb Nut - 3 Pack Includes: Thumb nut (3 pcs) Fits:InventorInventor 2Finder 2Creator ProCreator Pro 2Creator MaxCreator Max 2DreamerDreamer NXPrice: $5.99 -
Belt (Short) 250mm | Flashforge
Flashforge
Price: $5.99Flashforge Timing Belt This is the short belt that runs from the Y axis stepper motor to the Y axis drive shaft Includes: Belt (1 pcs) Size: 250mm Fits: Creator ProCreator Pro2 Creator MaxCreator Max 2DreamerDreamer...Price: $5.99 -
Belt (X Axis) Inventor 2, Finder/2 | Flashforge
Flashforge
Price: $7.99Flashforge X Axis Drive Belt Includes: Belt (1 pcs) Length: 650mm Location: X Axis Fits: Inventor 2FinderFinder 2Price: $7.99 -
Belt (Y Axis) Inventor 2/S, Finder/2 | Flashforge
Flashforge
Price: $7.99Flashforge Y Axis Drive Belt Includes: Belt (1 pcs) Length: 634mm Location: Y Axis Fits: Inventor 2Inventor 2SFinderFinder 2Price: $7.99 -
Boron Nitride Thermal Paste
PB Select™
Regular Price: $11.65 - $116.50Price: $4.99 - $49.95Boron Nitride Thermal Paste (BN Paste) Thermal paste improves heat conduction and heat distribution in the hotend. Contains high quality ZYP™ Boron Nitride and proprietary binders which reduce cracking and flaking when dried...Regular Price: $11.65 - $116.50Price: $4.99 - $49.95 -
Brim Scraper (Mini Scraper) Black or Orange
PB Select™
Price: $1.99Brim Scraper (Mini Scraper) We find this tool handy for removing the brim, and purge lines from the build plate. Includes: Brim Scraper (1 pcs)Price: $1.99 -
Build Plate Glass - Finder/2 | Flashforge
Flashforge
Price: $14.95Flashforge Build Plate Glass Glass only, does not include build tape. However, you can print directly on clean glass if you want your prints to have a glassy bottom. Includes: Glass build plate (1 pcs) Fits:FinderFinder 2Price: $14.95 -
Build Plate Tray - Finder/2 | Flashforge
Flashforge
Price: $12.95Flashforge Build plate Tray This is the tray that the build plate slides into. Includes: Tray (1 pcs) Fits: FinderFinder 2Price: $12.95 -
Button for Touch Screen - Inventor 2, Finder/2, Guider 2/S HT, Robo E3 Pro | Flashforge
Flashforge
Price: $3.99Button for Touch Screen Includes: Plastic button (1 pcs) Fits:FinderFinder 2Inventor 2Guider 2Guider 2S HTRobo E3 ProPrice: $3.99 -
Cable - X Limit Switch (Endstop) - Finder 2, Inventor 2 | Flashforge
Flashforge
Price: $7.99Flashforge X Limit Switch (Endstop) Cable Runs from X axis limit switch to mainboard Includes: Cable (1 pcs) Fits:FinderFinder 2Inventor 2Price: $7.99 -
Cable for TFT Touch Screen - Finder/2, Inventor 2/S | Flashforge
Flashforge
Price: $9.95Flat Cable for TFT Touch Screen Connects touch screen to mainboard Includes: Cable (1 pcs) Fits:FinderFinder 2Inventor 2Inventor 2S WARNING Pay close attention to the orientation of your current cable. Plugging this...Price: $9.95 -
Cable for X Motor (Red Plug) - Finder 2, Inventor 2 | Flashforge
Flashforge
Price: $7.99Flashforge X Axis Motor Cable Includes: Cable (1 pcs) Location: X axis motor Fits:Finder 2Inventor 2Price: $7.99 -
Cable for Y Axis Endstop (Limit Switch) Finder/2, Inventor 2 | Flashforge
Flashforge
Price: $5.99Flashforge Y Axis Endstop (Limit Switch) Cable Runs from mainboard to Y limit switch Includes: Cable (1 pcs) Fits:FinderFinder 2Inventor 2Price: $5.99 -
Cable for Y Stepper Motor - Finder/2, Inventor 2 | Flashforge
Flashforge
Price: $4.99Flashforge Y Stepper Motor Cable Runs from mainboard to Y stepper motor Includes: Cable (1 pcs) Fits:FinderFinder 2Inventor 2Price: $4.99 -
Drive Shaft Assembly (Y Axis) - Finder/2, Inventor 2/S | Flashforge
Flashforge
Price: $19.95Flashforge Y Axis Pulley Assembly (Drive Shaft) Includes:Y axis drive shaft (1 pcs)Pulley (3 pcs)Flange bearing (4 pcs)Spacer (1 pcs)E-Clips (2 pcs) Fits:Inventor 2Inventor 2SFinderFinder 2Price: $19.95 -
E Clip - 5 Pack | Flashforge
Flashforge
Price: $2.99Flashforge E-Clips For holding timing pulley to 5mm motor and axle shafts Includes: E-Clip (5pcs)Price: $2.99 -
Edge Cleanup (Deburring) Tool for 3D Prints
NOGA
Price: $13.953D Print Cleanup Tool This deburring tool is great for cleaning the brim off the long, straight edges of your 3D prints. We find it easier to use than an Exacto knife, because the blade doesn't dig into the plastic print as easily. The swivel head makes...Price: $13.95 -
Extruder Assembly - Finder 2 (24v) | Flashforge
Flashforge
Regular Price: $149.95Price: $99.95Used Item Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Flashforge Finder 2 (24v) Extruder Assembly Complete assembly including hotend. Includes: Extruder/hotend assembly...Regular Price: $149.95Price: $99.95 -
Extruder Cover - Finder/2, Inventor 2, Guider 2/2S HT, Robo E3 Pro | Flashforge
Flashforge
Price: $9.95Extruder Cover Includes: Cover (1 pcs) Fits:FinderFinder 2Inventor 2Guider 2Guider 2S HTRobo E3 Pro Note: Mounting hardware not included.Price: $9.95 -
Extruder Flat Cable - Finder 2, Inventor 2 | Flashforge
Flashforge
Price: $13.95Flashforge Extruder Cable Runs from the mainboard to the extruder assembly. Includes: Flat cable (1 pcs) Fits:FinderFinder 2Inventor 2Price: $13.95 -
Extruder Lever Assembly - Left Hand | Flashforge
Flashforge
Price: $19.95Flashforge Extruder Lever Assembly - Left Side Includes:Filament leverBacking plate assembly (1 pcs)Groove bearing (1 pcs)Groove bearing retaining plate (1 pcs)Shoulder bolt (1 pcs)Spring (1...Price: $19.95 -
Extruder Lever Assembly - Left Hand | Used
Flashforge
Price: $14.95Used Item Removed from low hour 3D printers Flashforge Extruder Lever Assembly - Left Side Includes:Filament lever (1 pcs)Backing plate assembly (1 pcs)Groove bearing (1 pcs)Groove bearing retaining plate (1...Price: $14.95 -
Extruder PCB Board - Finder 2 | Flashforge
Flashforge
Price: $17.95Flashforge Extruder Adapter Board (PCB) Includes: Adapter Board (1 pcs) Fits: Finder 2Price: $17.95 -
Extruder Spring | Flashforge
Flashforge
Price: $2.99Flashforge Extruder Spring Includes: Spring (1 pcs) Length: 21.5mm Fits:Adventurer 3Adventurer 4Creator 3Creator 3 ProInventorInventor 2FinderFinder 2 Creator ProCreator Pro 2Creator MaxCreator Max 2DreamerDreamer NX Monoprice...Price: $2.99 -
Fan - 40x20mm (24 volt) Chamber or Mainboard Cooling | Flashforge
Flashforge
Price: $12.95Flashforge 4020 Fan Cools mainboard and is also the print chamber fan on some printers. Includes: Fan (1 pcs)Size: 40x40x20mmVolts: 24 VDC Fits:Adventurer 3Adventurer 3 ProAdventurer 3 Pro 2Adventurer 4InventorInventor...Price: $12.95 -
Fan - 40x20mm (24 volt) Chamber or Mainboard Cooling | Used
Flashforge
Price: $9.95Used Item Removed from low hour 3D printer. Flashforge 4020 Fan Cools mainboard and is also the print chamber fan on some printers. Includes: Fan (1 pcs)Size: 40x40x20mmVolts: 24 VDC Fits:Adventurer 3Adventurer...Price: $9.95 -
Fan - Blower (Turbo) Inventor 2 and Finder/2 | Flashforge
Flashforge
Price: $12.95Flashforge Blower (Turbo) Fan This is the fan that cools the part being printed. Includes: Fan (1 pcs) Fits:Inventor 2Inventor 2SFinderFinder 2Price: $12.95 -
Filament Drive Gear - Hardened Steel | Flashforge
Flashforge
Price: $11.95Flashforge Hardened Steel Filament Drive (Extruder) Gear Hardened steel for longer life when printing abrasive materials such as Carbon Fiber Nylon Includes:Hardened steal filament drive gear (1 pcs)Set screw (1 pcs) Fits:Guider 2S HTGuider...Price: $11.95 -
Filament Drive Gear - Standard | Flashforge
Flashforge
Price: $7.95Flashforge Filament Drive (Extruder) Gear Includes:Standard filament drive gear (1 pcs)Set screw (1 pcs) Fits:Adventurer 3Adventurer 4Creator 3Guider 2S HTGuider 2InventorInventor 2/SFinderFinder 2Creator ProCreator Pro 2Creator MaxCreator Max...Price: $7.95 -
Filament Guide Tube - Finder/2, Inventor 2 | Flashforge
Flashforge
Price: $8.95Flashforge Filament Guide Tube Includes: Guide tube (1 pcs) Fits:FinderFinder 2Inventor 2Price: $8.95 -
Flashforge Bed Leveling Thumb Nuts and Springs - 3 Pack | Used
Flashforge
Price: $4.95Used Item removed from low hour 3D printers. Flashforge Bed Leveling Thumb Nut and Spring - 3 Pack Includes: Thumb Nut (3 pcs)Spring (3 pcs) Fits:InventorInventor 2Finder 2Creator ProCreator Pro 2Creator MaxCreator...Price: $4.95 -
Flashforge Belt (Short) 250mm | Used
Flashforge
Price: $5.99Used Item Removed from low hour 3D printers. Flashforge Timing Belt This is the short belt that runs from the Y axis stepper motor to the Y axis drive shaft Includes: Belt (1 pcs) Size: 250mm Fits: Creator...Price: $5.99 -
Flashforge Screwdriver - Phillips Head
Flashforge
Price: $1.99Small Phillips Head Screwdriver This is the small screwdriver that comes with the accessory kit of many new Flashforge 3D printers Includes: Screwdriver (1 pcs)Price: $1.99 -
Flush Cut Trimmer (Side Cutters)
PB Select™
Price: $4.99Flush Cut Trimmers Also called side cutters. We use these trimmers for cutting filament, removing supports and cleaning up prints. Includes: Trimmers (1 pc)Price: $4.99 -
Grease Packet - 3 Grams | Flashforge
Flashforge
Price: $2.99Flashforge 3D Printer Grease This is the same grease that comes standard with many Flashforge 3D Printers. Size: 3 Grams Includes: Grease packet (1 pcs)Price: $2.99 -
Heat Break (Threaded Pipe) - Finder 2, Inventor 2, Guider 2 | Flashforge
Flashforge
Price: $14.95Flashforge Heat Break (Threaded Pipe) Includes: Heat break (1 pcs) Fits:FinderFinder 2.0Inventor 2Inventor 2SGuider 2Price: $14.95 -
Heat Break for Microswiss All Metal Hotend Kit - Flashforge Finder, Inventor 2, Guider 2 | Microswiss
Microswiss
Price: $22.95Heat Break (Thermal Tube) for Microswiss All Metal Hotend Kit This is a replacement heat break for this Microswiss all metal hotend upgrade. Includes: Heat break (1 pcs) Fits:FinderFinder 2Inventor 2Guider 2Price: $22.95 -
Heater Block (for Bead Thermistor) Finder 2 | Flashforge
Flashforge
Price: $12.95Flashforge Heater Block This heater block is for the latest version thermistor from Flashforge. Includes:Heater block (1 pcs)Screw for holding thermistor (1pcs)Set screw for holding heater (1 pcs) Fits: Finder 2 (with bead...Price: $12.95 -
Heater Block - Finder 2, Guider 2, Inventor 2 | Flashforge
Flashforge
Price: $12.95Flashforge Heater Block Includes: Heater block (1 pcs) Fits:Guider 2Finder 2Inventor 2 NOTE: Does not include set screw for holding heater cartridge. If needed, purchase set screw here.Price: $12.95 -
Heater Cartridge - Finder 2, Inventor 2, Guider 2, Guider 2S HT, Robo E3 Pro | Flashforge
Flashforge
Price: $13.95Flashforge Heater Cartridge Includes: Heater cartridge (1 pcs) Volts: 24Watts: 40 Fits:Finder (24 volt)Finder 2Guider 2Guider 2S HTInventor 2Inventor 2SRobo E3 ProPrice: $13.95 -
Heater Cartridge 12v 58w - Original Finder 12 Volt | Flashforge
Flashforge
Price: $12.95Flashforge Heater Cartridge Includes: Heater cartridge (1 pcs) Specs:12 volt58 watt Fits: Original Finder 12 voltPrice: $12.95 -
Heatsink - Inventor 2, Finder | Flashforge
Flashforge
Regular Price: $15.95Price: $9.95Flashforge Heatsink Includes: Heatsink (1 pcs) Fits:FinderFinder 2Inventor 2Inventor 2SRegular Price: $15.95Price: $9.95 -
Hex Wrench - Ball End - 2.0mm
Flashforge
Price: $1.29Ball End Hex Wrench - L Wrench Includes: Hex wrench (1 pcs) Size: 2.0mmPrice: $1.29 -
Hex Wrench - Ball End - 2.5mm
PB Select™
Price: $1.29PB Select™ Ball End Hex Wrench - L Wrench Includes: Hex wrench (1 pcs) Size: 2.5mmPrice: $1.29 -
Hotend Assembly - Finder 2 | Flashforge
Flashforge
Price: $49.95Flashforge 24 Volt Hotend Assembly for Finder 2 Comes fully assembled Includes:Heatsink (1 pcs)Heat break (1 pcs)Heater block (1 pcs)0.40mm Nozzle (1 pcs)Heater cartridge (1 pcs)Thermocouple (1 pcs)PTFE...Price: $49.95 -
Idler Pulley Assembly (Y-Axis) Finder/2, Inventor 2/S | Flashforge
Flashforge
Price: $12.95Flashforge Idler (Driven) Pulley Assembly Includes:Pulley (1 pcs)Shaft (1 pcs)Flange Bearing (2 pcs)E-clip (2 pcs) Location: Y axis Fits:Inventor 2Inventor 2SFinder Finder 2Price: $12.95 -
Idler Pulley Assembly (Y-Axis) Finder/2, Inventor 2/S | Used
Flashforge
Price: $9.95Used Item Removed from low hour 3D printer Flashforge Idler (Driven) Pulley Assembly Includes:Pulley (1 pcs)Shaft (1 pcs)Flange Bearing (2 pcs)E-clip (2 pcs) Location: Y axis Fits:Inventor...Price: $9.95 -
Leadscrew Nut - Adventurer 4 | Flashforge
Flashforge
Price: $4.99Flashforge Leadscrew Nut Includes: Leadscrew nut (1 pcs) Fits:Adventurer 4Price: $4.99 -
Leadscrew Nut - Creator Pro, Dreamer, Inventor, Finder | Used
Flashforge
Price: $4.99Used Item This item is fully functional, but may show signs of use, such as scuffs and scratches. Flashforge Leadscrew Nut Includes: Leadscrew nut (1 pcs) Fits:Creator ProDreamerInventorFinderPrice: $4.99 -
LED Light Board - Adventurer 3/4, Finder 2, MP Voxel, Robo E3 | Flashforge
Flashforge
Price: $4.99Flashforge LED Board Fits in the print head and lights the object being printed. Includes: LED Board (1 pcs) Fits:Adventurer 3Adventurer 4Finder 2Monoprice VoxelRobo E3Price: $4.99 -
Limit Switch - Z Axis (Endstop) Finder/2 | Flashforge
Flashforge
Price: $8.95Flashforge Z Axis Endstop (Limit Switch) Fits:FinderFinder 2Price: $8.95 -
Limit Switch for X Axis - Finder/2 | Flashforge
Flashforge
Price: $8.95Flashforge X Axis Limit Switch (Endstop) Includes: Limit switch (1 pcs) Fits:FinderFinder 2Price: $8.95 -
Limit Switch for Y Axis - Finder/2 | Flashforge
Flashforge
Price: $8.95Flashforge Y Axis Limit Switch (Endstop) Fits:FinderFinder 2Price: $8.95 -
Linear Bearing LM8SUU (4 Pack) | MYT
MYT®
Price: $13.95MYT LM8SUU Linear Bearings for Flashforge and other 3D Printers Includes: Bearing (4 pcs) Specifications:ID: 8mmOD: 15mmL: 17mm Fits:Creator ProCreator pro 2Creator MaxCreator Max 2DreamerDreamer NXInventorInventor 2FinderFinder...Price: $13.95 -
Linear Rod - X Axis (2 pack) Finder/2, Inventor 2/S | Flashforge
Flashforge
Price: $13.95Flashforge Linear Rod Includes: Linear rod (2 pcs) Size: 8x320mm Location: X axis Fits:FinderFinder 2Inventor 2Inventor 2SPrice: $13.95 -
Linear Rod - Y Axis (2 pack) Finder/2, Inventor 2/S | Flashforge
Flashforge
Price: $13.95Flashforge Linear Rod Includes: Linear rod (2 pcs) Size: 8x340mm Location: Y axis Fits:FinderFinder 2Inventor 2Inventor 2SPrice: $13.95 -
Linear Rod Kit - Z Axis (2 pack) Finder/2, Inventor 2/S | Refurbished
Flashforge
Price: $19.95Like New Removed from new or low hour 3D printer. Flashforge Linear Rod Includes: Linear rod (2 pcs)Brackets (2 pcs)Screws (4 pcs) Size: 10x290mm Location: Z axis Fits:FinderFinder 2Inventor 2Inventor 2SPrice: $19.95 -
Mainboard - Finder 2 | Flashforge
Flashforge
Regular Price: $159.95Price: $124.95Please read our returns policy regarding electronic items Flashforge Finder 2 Mainboard Printed on board: FINDER PLUS V2.0.2 DATE:2018-03-24 Includes: Mainboard (1 pcs) Fits: Finder 2 The new boards may default to Chinese...Regular Price: $159.95Price: $124.95 -
Mainboard - Finder Lite | Flashforge
Flashforge
Price: $79.95Please read our returns policy regarding electronic items Flashforge Finder Lite Mainboard Includes: Mainboard (1 pcs) Fits: Finder Lite The new boards may default to Chinese. Below is a video by PicoKit on how...Price: $79.95 -
Metal Hotend Cover (Shield) | Flashforge
Flashforge
Price: $4.95Flashforge Metal Hotend Cover Metal shroud fits inside the hotend air duct and protects the heater block. Includes: Hotend shroud (1 pcs) Fits:Guider 2Guider 2S (HT)Inventor 2/SFinder/2Robo E3 ProPrice: $4.95 -
MK10 Brass Nozzle
PB Select™
Price: $9.95MK10 Brass Nozzle for PTFE Lined Hotend Includes: Nozzle (1 pcs) Size: Select Above Fits:Flashforge Guider 2 (not high temp version)Flashforge InventorFlashforge Inventor 2SFlashforge Creator ProFlashforge Creator MaxFlashforge...Price: $9.95 -
MK10 Brass Nozzle (Only Compatible With Microswiss All Metal Hotend)
PB Select™
Price: $7.95MK10 Brass Nozzle (for Microswiss All Metal Hotend Only) Note: Will not fit the stock PTFE lined hotend. This nozzle has completely different internal dimensions to work with the Microswiss thermal barrier tube...Price: $7.95 -
MK10 Nozzle (for PTFE Lined Hotend*) Microswiss
Microswiss
Price: $14.99MK10 Plated Wear-Resistant Nozzle for PTFE-Lined Hotend This nozzle is for PTFE lined hotends only. It has a larger diameter hole in the top, so the PTFE tube can slide into the nozzle. It will not work with all metal hotends...Price: $14.99 -
MK10 Nozzle for All Metal Hotend Kit* (A2 Steel) Microswiss
Microswiss
Price: $19.00Microswiss MK10 Wear-Resistant (A2 Tool Steel) Nozzle for Microswiss All Metal Hotend Kit Perfect for printing abrasive material, such as carbon fiber, metal filled, wood-filled, glow in the dark, etc. *Note: This...Price: $19.00 -
MK10 Nozzle for All Metal Hotend Kit* | Microswiss
Microswiss
Price: $14.99MK10 Plated Wear-Resistant Nozzle for Microswiss All Metal Hotend Kit If you are printing abrasive material, such as carbon fiber, stainless steel, wood-filled or any other metal filled filaments, this will greatly improve the life of your...Price: $14.99 -
Motor Drive Pulley (Gray) | Flashforge
Flashforge
Price: $6.95Timing Belt (Motor) Drive Pulley This is the drive pulley that is used on many Flashforge 3D printers. Includes:Pulley (1pcs)Pulley disc (1 pcs)E-clip (1 pcs) Fits:Adventurer 3Adventurer 4Creator ProCreator Pro 2Creator MaxCreator Max 2Creator...Price: $6.95 -
Motor Mount (Y Axis) Finder, Inventor 2, Creator Pro/2, Creator Max/2 | Flashforge
Flashforge
Price: $6.95Flashforge Motor Mount Includes: Motor mount (1 pcs) Location: Y Axis Motor Fits:FinderFinder 2Inventor 2Creator ProCreator Pro 2Creator MaxCreator Max 2Price: $6.95 -
Nozzle (Stock Size) 0.40mm | Flashforge
Flashforge
Now: $9.95Regular Price: $12.95Flashforge Brass Nozzle Includes: Brass nozzle (1 pcs) Orifice Size: 0.40mm Note: PTFE tube not included - use the links below to buy the proper PTFE tube for your printer Fits:Guider 2 (not for HT version) - PTFE tubeInventor...Now: $9.95Regular Price: $12.95 -
Nozzle Coat | 4ml
PB Select™
Price: $14.99Nozzle Coat™ Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block. Includes:...Price: $14.99 -
Power Cord - NEMA 5-15P to EIC (PC Type)
PB Select™
Price: $4.95Power Supply Cord AC power cord that runs from the power supply to a USA type wall outlet Includes: Power cord (1 pcs) Note: Power supply is not includedPrice: $4.95 -
Power Inlet/Switch - Finder 2 | Flashforge
Flashforge
Price: $9.95Flashforge Power Switch/Inlet PCB Board Includes: Power inlet switch board (1 pcs) Fits: Finder 2 (24 volt)Price: $9.95 -
PTFE Tube for Nozzle - Finder/2, Inventor 2 | Flashforge
Flashforge
Price: $1.99Flashforge PTFE Tube for Hotend/Nozzle This is the PTFE tube that fits inside the nozzle & heat break Includes: PTFE tube (1 pcs) Fits:FinderFinder 2Inventor 2Price: $1.99 -
Pulley Assembly (Idler) X-Axis - Creator Pro, Inventor 2/S, Finder/2 | Used
Flashforge
Price: $12.95Used Item Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. X Axis Pulley Assembly Includes: Toothed pulley (1 pcs)Shaft (1 pcs)Spacer (1 pcs)Flange bearings (2 pcs) Fits:...Price: $12.95 -
Pulley Assembly (Idler) X-Axis - Inventor, Dreamer, Creator Pro/Max | Flashforge
Flashforge
Price: $13.95Flashforge Idler Pulley Assembly Includes: Toothed pulley (1 pcs)Shaft (1 pcs)Spacer (1 pcs)Flange bearings (2 pcs) Location: X-Axis Fits:FinderFinder 2InventorInventor 2Inventor 2SDreamerDreamer NXCreator Pro (does not fit Creator Pro...Price: $13.95 -
Pulley Assembly (Idler) X-Axis - Inventor, Dreamer, Creator Pro/Max, Flashforge | Used
Flashforge
Price: $9.95Used Item Removed from low hour 3D printer. May have minor scratches and/or cosmetic imperfections. Flashforge Idler Pulley Assembly Includes: Toothed pulley (1 pcs)Shaft (1 pcs)Spacer (1 pcs)Flange bearings (2...Price: $9.95 -
Set Screw - M4X4 - Cup Point | 12.9 Grade
PB Select™
Price: $0.79M4X4 Set Screw Used to secure the heater cartridge and heatsink of many Flashforge 3D printers. Includes: M4x4 set screw (1 pcs) Specs:12.9 GradeCup PointUses 2mm Hex Key Driver (not included) Fits:FinderFinder 2Guider 2Guider 2S...Price: $0.79 -
Set Screw - M4x4 - Flat Point | 12.9 Grade
PB Select™
Now: $0.59Regular Price: $0.79M4X4 Set Screw 12.9 Grade Flat Point Uses 2mm Hex Key Driver Includes: Set screw (1 pcs)Now: $0.59Regular Price: $0.79 -
Silicone Sock - Finder 3 and Artemis | Flashforge
Flashforge
Price: $3.99Silicone Sock (Heater Block Cover) The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature, reducing the amount of times your heater needs to cycle. As an added benefit, the silicone sock will keep...Price: $3.99 -
Silicone Sock - Finder/2, Inventor 2/2S, Guider 2/2S HT* | Flashforge
Flashforge
Price: $2.49Silicone Sock (Heater Block Cover) The primary purpose of a silicone sock is to help keep your hotend at a more consistent temperature, reducing the amount of times your heater needs to cycle. As an added benefit, the silicone sock will keep...Price: $2.49 -
Spool Holder - Finder/2(*Used) | Flashforge
Flashforge
Price: $19.95Flashforge Spool Holder *This is a used product and may show signs of light use. Includes: Spool holder (1 pcs) Color: Red Fits: Finder Finder 2Price: $19.95 -
Spring for Bed Leveling - Dreamer, Inventor, Creator Pro/2, Creator Max/2 | Flashforge
Flashforge
Price: $1.99Flashforge Bed Leveling Spring Includes: Spring (1 pcs) Fits:DreamerDreamer NXInventorInventor 2FinderFinder 2Creator ProCreator Pro 2Creator MaxCreator Max 2 Note: Sold in units of 1 - Three springs are required per printerPrice: $1.99 -
Spring for Bed Leveling - Finder/2, Inventor 2 | Flashforge
Flashforge
Price: $1.99Flashforge Replacement Bed leveling Spring Includes: Spring (1 pcs) Fits:FinderFinder 2 Inventor 2Inventor 2S Note: Sold in units of one - 3 are required per printerPrice: $1.99 -
Spring for Belt Tension | Flashforge
Flashforge
Price: $1.49Flashforge Spring Includes: Spring (1 pcs) Fits:Creator ProCreator Pro 2Creator MaxCreator Max 2DreamerDreamer NXFinder 2InventorInventor 2Price: $1.49 -
Stepper Motor (Z-Axis) Finder 2 | Flashforge
Flashforge
Price: $19.95Flashforge Z Motor Includes: Motor (1 pcs) Fits: Finder 2Price: $19.95 -
Stepper Motor Finder, Finder 2*, Adventurer 3, 4*, MP Voxel, Robo E3 | Flashforge
Flashforge
Price: $24.95Flashforge Stepper Motor (X/Y/Z) Includes: Stepper motor (1 pcs) Location: X/Y/Z Axis* Fits: Finder *(X/Y Axis Only)Finder 2 *(X/Y Axis Only)Adventurer 3 Adventurer 4 *(X/Z Axis Only)Monoprice VoxelRobo E3Price: $24.95 -
Synthetic Grease with PTFE - 1 cc | Super Lube™
Super Lube
Price: $0.99Super Lube 82340 - Synthetic Grease with SYNCOLON™ (PTFE) This small size pouch is great for lubing the filament drive gears on dual gear or orbiting gear extruders. Includes: 1 Pouch Size: 1 cc Contains no...Price: $0.99 -
Synthetic Grease with SYNCOLON™ (PTFE) | 12g
Super Lube
Price: $5.99Super Lube 21010 - Synthetic Grease with SYNCOLON™ (PTFE) Super Lube 21010 is a Prusa Research approved lubricant. Use on your Bondtech drive gears, Linear bearings or anywhere else you need a high quality...Price: $5.99 -
Synthetic Grease with SYNCOLON™ (PTFE) | 3oz
Super Lube
Price: $9.99Super Lube 21030 - Synthetic Grease with SYNCOLON™ (PTFE) This is a Prusa Research approved lubricant. Can be used on drive gears, Linear bearings or anywhere else you need a high quality grease...Price: $9.99 -
Thermistor (Latest Version) - Finder 2 | Read fitment details below
Flashforge
Price: $12.95Flashforge Finder 2 Bead Thermistor This is the latest (and only) version available from Flashforge. Includes: Thermistor (1 pcs) Fits: Finder 2 (with new heater block) IMPORTANT Please read...Price: $12.95 -
Thermistor (Older Version) - Finder 2 | Flashforge
Flashforge
Price: $13.95Flashforge Finder 2 Thermistor Includes: Thermistor (1 pcs) Fits: Finder 2 (with threaded heater block) IMPORTANT Please read everything below before ordering. This thermistor does not fit the Finder, it...Price: $13.95 -
Thermocouple - Inventor 2, Guider 2, Guider 2S HT, Finder* Robo E3 Pro | Flashforge
Flashforge
Price: $19.95Flashforge Thermocouple Includes: Thermocouple (1 pcs) Fits:Inventor 2Guider 2Guider 2S HTRobo E3 ProFinder* *IMPORTANT If ordering for the Finder, please read everything below before ordering.Make sure the picture above...Price: $19.95