Parts by Printer

Parts by Printer

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • 10x10 PEI BuildTak Build Sheet

    10x10 PEI Sheet - 2 Pack | BuildTak

    BuildTak

    $36.00
    Pack of 2 BuildTak PEI Sheets - 10x10  An ideal print surface for any 3D printer with a 10x10 print bed. Manufactured right here in the USA to ensure consistent quality and composition, the BuildTak Polyetherimide (PEI) build surfaces...
    SKU:
    BTAK-PEI-10X10-2PK
    $36.00
    Qty in Cart: 0
    Quantity:
    Price:
    $36.00
    Subtotal:
  • 40mm Fan Guard with Filter Element | PBX

    PB3D

    $2.99
    Fan Finger Guard - 40mm Includes: 1 fan finger guard - 40mm 1 filter retainer 1 filter element
    SKU:
    PBX-FAN-GUARD-FILT
    $2.99
    Qty in Cart: 0
    Quantity:
    Price:
    $2.99
    Subtotal:
  • MakerGear 12v Extruder Fan 40x10mm for M2

    40x10mm 12v Fan | MakerGear

    MakerGear OEM Parts

    $15.00
    Replacement Extruder Fan 40x10mm, 12 volt for your MakerGear M2 3D printer This is the smaller of the two fans mounted in front of the extruder and also used inside the electronics case. This fan has a keyed connector, guarding against...
    SKU:
    MG-EXTFAN-4010-12
    $15.00
    Qty in Cart: 0
    Quantity:
    Price:
    $15.00
    Subtotal:
  • MakerGear Extruder Fan 40x10mm

    40x10mm 24v Extruder Fan | MakerGear

    MakerGear OEM Parts

    $15.00
    Replacement Extruder Fan 40x10mm, 24 volt for your MakerGear M2/M3 3D printer This is the smaller of the two fans mounted in front of the extruder and also used inside the electronics case. This fan has a keyed connector, guarding against...
    SKU:
    MG-EXTFAN-4010-24
    $15.00
    Qty in Cart: 0
    Quantity:
    Price:
    $15.00
    Subtotal:
  • MakerGear Extruder Fan 40x10mm

    40x10mm MakerGear M3 Extruder Fan | PBX Parts

    PB3D

    Regular Price: $15.00
    $12.95
    Replacement Extruder Fan 40x10mm, 24 volt for your MakerGear M2/M3 3D printer This is the smaller of the two fans mounted in front of the extruder and also used inside the electronics case. This fan has a keyed connector, guarding against...
    SKU:
    PBX-MG-EXTFAN-24
    Regular Price: $15.00
    $12.95
    Qty in Cart: 0
    Quantity:
    Price:
    Regular Price: $15.00
    $12.95
    Subtotal:
  • MakerGear bed fan

    40x15mm 24v M3 Bed Fan | MakerGear

    MakerGear OEM Parts

    $15.00
    24-Volt, 40x15mm replacement bed fan for your MakerGear M3 This fan has a keyed connector, guarding against incorrect plug-in. All fans should be kept free of dust buildup to prevent failure.     
    SKU:
    MG-BEDFAN-4015-24
    $15.00
    Qty in Cart: 0
    Quantity:
    Price:
    $15.00
    Subtotal:
  • MakerGear bed fan

    40x15mm MakerGear M3 Bed Fan | PBX Parts

    PB3D

    Regular Price: $15.00
    $12.95
    24-Volt, 40x15mm replacement bed fan for your MakerGear M3 This fan has a keyed connector, guarding against incorrect plug-in.  Fits: All MakerGear M3s    
    SKU:
    PBX-MG-BEDFAN-24
    Regular Price: $15.00
    $12.95
    Qty in Cart: 0
    Quantity:
    Price:
    Regular Price: $15.00
    $12.95
    Subtotal:
  • MakerGear 12 Volt Extruder Fan 50x50x10

    50x10mm 12v M2 Extruder Fan | MakerGear

    MakerGear OEM Parts

    $15.00
    M2 Replacement Extruder Fan 50x50x10mm, 12 volt for your MakerGear M2 3D printer Mounted at a 45 degree angle in front of the extruder's 40mm fan, this 50 mm fan provides users with greater control over the cooling rate of extruded...
    SKU:
    MG-EXTFAN-5010-12
    $15.00
    Qty in Cart: 0
    Quantity:
    Price:
    $15.00
    Subtotal:
  • Fan for MakerGear M2 Dual

    50x10mm 24v M2 Dual Extruder Fan | MakerGear

    MakerGear OEM Parts

    $15.00
    M2 Dual Replacement Extruder Fan 50x10mm - 24v for your MakerGear M2 Dual 3D printer This fan has longer leads to accommodate the M2 Dual 3D Printer Mounted at a 45 degree angle in front of the extruder's 40mm fan, this 50 mm...
    SKU:
    MG-EXTFAN-5010-24-DUAL
    $15.00
    Qty in Cart: 0
    Quantity:
    Price:
    $15.00
    Subtotal:
  • MakerGear Extruder Fan 50x50x10 12 Volt

    50x10mm 24v M2 Extruder Fan | MakerGear

    MakerGear OEM Parts

    $15.00
    M2 Replacement Extruder Fan - 50x50x10mm, 24 volt Mounted at a 45 degree angle in front of the extruder's 40mm fan, this 50 mm fan provides users with greater control over the cooling rate of extruded filament material. This fan has a...
    SKU:
    MG-EXTFAN-5010-24
    $15.00
    Qty in Cart: 0
    Quantity:
    Price:
    $15.00
    Subtotal:
  •  Borosilicate Glass Plate

    8x10 Glass Build Surface | MakerGear

    MakerGear OEM Parts

    $26.00
    8x10 Build Surface from MakerGear Made from borosilicate glass, this 8" x 10" x 0.13" (20 cm x 25 cm x 3.3 mm) build plate provides a perfect print surface when properly coated in a film of polyimide tape, GeckoTek or BuildTak. For use with the...
    SKU:
    MG-BUILDSURFACE
    $26.00
    Qty in Cart: 0
    Price:
    $26.00
    Subtotal:
  • 8x10 BuildTak Build Sheet

    8x10 Original BuildTak Sheet - MakerGear M2 & M3

    BuildTak

    $13.50
    BuildTak Sheet - an ideal build surface for the MakerGear M2 & M3 Sold in units of one 8x10 inches (203x254 mm) Creates an optimal bond between the 3D printed object and build surface Allows for clean and easy removal of the object from the...
    SKU:
    BTAK-8X10
    $13.50
    Qty in Cart: 0
    Quantity:
    Price:
    $13.50
    Subtotal:
  • 8x10 PEI BuildTak Build Sheet

    8x10 PEI Sheet - 2 Pack | BuildTak

    BuildTak

    $32.00
    Pack of 2 BuildTak PEI Sheets - 8x10  An ideal print surface for the MakerGear M2, M3 and other 8x10 print beds. Manufactured right here in the USA to ensure consistent quality and composition, the BuildTak Polyetherimide (PEI)...
    SKU:
    BTAK-PEI-8X10-2PK
    $32.00
    Qty in Cart: 0
    Price:
    $32.00
    Subtotal:
  • 8x10 PEI Sheet - 3 Pack | BuildTak

    BuildTak

    $46.95
    Pack of 3 BuildTak PEI Sheets - 8x10  An ideal print surface for the MakerGear M2, M3 and other 8x10 print beds. Manufactured right here in the USA to ensure consistent quality and composition, the BuildTak Polyetherimide (PEI)...
    SKU:
    BTAK-PEI-8X10-3PK
    $46.95
    Qty in Cart: 0
    Quantity:
    Price:
    $46.95
    Subtotal:
  • 8x10 PEI Sheet | BuildTak

    BuildTak

    $17.00
    BuildTak PEI Sheet - 8x10  Sold in units of one. Buy a 2 pack of 8x10 PEI sheets here Buy a 3 pack of 8x10 PEI sheets here An ideal print surface for the MakerGear M2, M3 and other 8x10 print beds. Manufactured right here in the USA...
    SKU:
    BTAK-PEI-8X10
    $17.00
    Qty in Cart: 0
    Quantity:
    Price:
    $17.00
    Subtotal:
  • LCD adapter for MakerGear 3D Printer

    Adapter for MakerGear M2 LCD Display

    Geeetech

    $5.49
    LCD Adapter for MakerGear M2 3D Printer This adapter will connect you LCD display to the RAMBO board on the MakerGear M2 3D Printer
    SKU:
    GT-ADPT-MGM2-LCD
    $5.49
    Qty in Cart: 0
    Quantity:
    Price:
    $5.49
    Subtotal:
  • All Metal Hotend Kit for CR10/Ender/Tornado/X5S/U20 | Micro Swiss

    Micro-Swiss

    $63.50
    Micro Swiss All Metal Hot End Upgrade Kit Kit includes 0.40mm nozzle Buy Micro Swiss MK8 nozzles in other sizes here Key benefits of the Micro Swiss All Metal Hotend: No printer modification needed - this kit is a drop-in replacement for...
    SKU:
    MS-AMHK-M2583-04
    $63.50
    Qty in Cart: 0
    Quantity:
    Price:
    $63.50
    Subtotal:
  • CR10 S Pro All Metal Hotend

    All Metal Hotend Kit for Creality CR-10S Pro | Micro Swiss

    Micro-Swiss

    $63.50
    Micro Swiss All Metal Hot End for Creality CR10S Pro Kit comes standard with a 0.40mm nozzle. Shop other Micro Swiss Mk8 nozzle sizes here Key benefits of the Micro Swiss All Metal Hotend: A common complaint of the CR10S Pro is that it uses...
    SKU:
    MS-AMHK-M2591-04
    $63.50
    Qty in Cart: 0
    Quantity:
    Price:
    $63.50
    Subtotal:
  • Micro Swiss Hotend for Flahsforge

    All Metal Hotend Kit for Flashforge Finder/Guider 2/Inventor 2 | Micro Swiss

    Micro-Swiss

    $37.75
    Micro Swiss All Metal Hotend Kit for Flashforge Finder/Inventor 2/Guider 2, 2S /Dremel 3D40 This is an all metal hotend upgrade kit for Flashforge Finder, Inventor 2 and Guider 2 printers Micro Swiss' all metal hotend allows you to print at much higher...
    SKU:
    MS-AMHK-FF-M2575-04
    $37.75
    Qty in Cart: 0
    Quantity:
    Price:
    $37.75
    Subtotal:
  • All Metal Hotend Kit for Wanhao D6

    All Metal Hotend Kit for Wanhao D6 | Micro Swiss

    Micro-Swiss

    Regular Price: $57.95
    $54.95
    All Metal Hotend with Slotted Cooling Block for Duplicator 6 This is the Micro Swiss all metal hotend kit for Wanhao Duplicator 6 with the following improvements: Significantly better heat transfer  Slotted clamping system No set screw to ding...
    SKU:
    MS-AMHK-D6-M2561-04
    Regular Price: $57.95
    $54.95
    Qty in Cart: 0
    Quantity:
    Price:
    Regular Price: $57.95
    $54.95
    Subtotal:
  • Micro Swiss All Metal Hotend Kit for Wanhao i3

    All Metal Hotend Kit for Wanhao i3 | Micro Swiss

    Micro-Swiss

    $49.99
    All Metal Hotend Kit with Slotted Cooling Block for Wanhao i3 This is the Micro Swiss all metal hotend upgrade with redesigned cooling block for Wanhao i3, Wanhao i3 Plus and all other i3 clones with the following...
    SKU:
    MS-AMHK-I3-M2560-04
    $49.99
    Qty in Cart: 0
    Quantity:
    Price:
    $49.99
    Subtotal:
  • Arduino 2560

    Arduino MEGA 2560 R3 for Robo R1+ | Arduino Clone

    ZYLtech

    $10.95
    ZYLtech MEGA 2560 R3 Board Atmega16u2/Atmega2560 for Arduino w/ Free USB Cable We have found that this Arduino clone will work with the R1/+ 3D printer as a replacement for the Robo Arduino board. However it does not have the extended USB port, so once...
    SKU:
    ZYL-ARD-MEGA-2560
    $10.95
    Qty in Cart: 0
    Quantity:
    Price:
    $10.95
    Subtotal:
  • Flashforge v-bearing

    Bearing (V Type) | Flashforge

    Flashforge OEM Parts

    $3.99
    Flashforge V Bearing   Adventurer 3 Creator 3 Creator Pro Dreamer Dreamer 2 Finder 2.0 Guider 2 Guider 2S HT Inventor Inventor 2
    SKU:
    FLF-BEAR-V-CRP
    $3.99
    Qty in Cart: 0
    Quantity:
    Price:
    $3.99
    Subtotal:
  • Robo R2 Bed Carrier Plate

    Bed Carrier Plate - R2 | Robo 3D

    Robo 3D

    $24.95
    Bed Carrier (leveling) Plate for Robo R2 This is the plastic carrier plate only and does not include the acorn nuts or bed leveling hardware
    SKU:
    R2-BED-CARRIER_PLATE
    $24.95
    Qty in Cart: 0
    Quantity:
    Price:
    $24.95
    Subtotal:
  • R1+ bed connection cable

    Bed Connection Cable - R1+ | Robo 3D

    Robo 3D

    $9.95
    Robo OEM R1+ Heated Bed Connection Cable  If you currently have a V1 bed with a long cable, you will need this extension cable if you are upgrading to the V2 bed (which has a short cable). Buy the R1+ heated glass V2 bed here Fits: R1+ V2
    SKU:
    R1-CBL-BED
    $9.95
    Qty in Cart: 0
    Quantity:
    Price:
    $9.95
    Subtotal:
  • MakerGear M3 Bed Heater

    Bed Heater | MakerGear

    MakerGear OEM Parts

    $30.00
    Replacement Bed Heater for MakerGear M2 & M3 3D Printers Silicone bed heater, includes header plug. Fits MakerGear M2 24V and MakerGear M3
    SKU:
    MG-BEDHEATER
    $30.00
    Qty in Cart: 0
    Quantity:
    Price:
    $30.00
    Subtotal:
  • Robo Bed leveling hardware

    Bed Leveling Hardware (2 Pack) - R2 | Robo 3D

    Robo 3D

    $5.99
    Robo R2 Bed Leveling Hardware - 2 Pack Includes: 2 Thumb nuts 2 Springs 2 Bolts Fits: R2 
    SKU:
    R2-BEDLVL-2PK
    $5.99
    Qty in Cart: 0
    Quantity:
    Price:
    $5.99
    Subtotal:
  • MakerGear Bed Level Kit

    Bed Leveling Probe Upgrade for the MakerGear M3-ID REV.0

    MakerGear OEM Parts

    $149.95
    This kit will upgrade your MakerGear M3-ID REV.0 to have the same improved leveling process and auto-compensation as the MakerGear M3-ID REV.1 3D Printers.   Installation Guide 
    SKU:
    MG-BLT-M3ID-R0
    $149.95
    Qty in Cart: 0
    Quantity:
    Price:
    $149.95
    Subtotal:
  • Robo R1/+ bed magnets

    Bed Magnets (4 Pack) - R1/+ | Robo 3D

    Robo 3D

    $3.00
    Bed magnets for R1/+ glass bed Please note: these come standard with any order of an R1+ glass build plate. Apply using epoxy and these clamps for best results. Sold in pack of 4.  Fits: R1 and R1+ 
    SKU:
    R1-BED-MAG
    $3.00
    Qty in Cart: 0
    Quantity:
    Price:
    $3.00
    Subtotal:
  • Robo R2/C2 Bed Magnets

    Bed Magnets - 2 Pack - R2/C2 | Robo 3D

    Robo 3D

    $2.99
    Robo R2/C2 Bed Magnets  Fits: R2/C2 Sold in pack of 2
    SKU:
    R2C2-BEDMAG-2PK
    $2.99
    Qty in Cart: 0
    Quantity:
    Price:
    $2.99
    Subtotal:
  • Robo R2/C2 Bed Nuts - 2 Pack

    Bed Nuts (2 Pack) R2/C2 | Robo 3D

    Robo 3D

    $1.49
    Robo R2/C2 Bed Nuts Fits: R2 and C2 Sold in packs of 2 
    SKU:
    R2C2-BEDNUT-2PK
    $1.49
    Qty in Cart: 0
    Quantity:
    Price:
    $1.49
    Subtotal:
  • Bed Thermistor M2 and M3 MakerGear 3D printers

    Bed Thermistor | MakerGear

    MakerGear OEM Parts

    $25.00
    MakerGear Bed Thermistor Replacement OEM thermistor for MakerGear 3D printers Fits: MakerGear M2 and M3 printers (includes connector)
    SKU:
    MG-BEDTHERM
    $25.00
    Qty in Cart: 0
    Quantity:
    Price:
    $25.00
    Subtotal:
  • R1+ X Axis Belt

    Belt - X Axis - R1+ | Robo 3D

    Robo 3D

    $6.99
    Robo R1+ X Axis Belt Fits: R1 and R1+ 
    SKU:
    R1-BELT-X
    $6.99
    Qty in Cart: 0
    Quantity:
    Price:
    $6.99
    Subtotal:
  • Robo R2-X/Y Belt

    Belt - X/Y Long - R2 (Set of 2) | Robo 3D

    Gates

    $16.95
    Robo R2 X or Y Axis Belt Set These are the long belts that run from shaft to shaft on the X and Y axis. Includes: 2 Genuine Gates PowerGrip GT belts (each axis requires 2 belts - order two sets if you need to replace the belts of both X and Y...
    SKU:
    R2-BELT-XY-0600-2PK
    $16.95
    Qty in Cart: 0
    Quantity:
    Price:
    $16.95
    Subtotal:
  • Total: items /

Adding your products to cart