Parts Sorted by Printer

Parts Sorted by Printer

  • 254x254 BuildTak sheet
    Add to Cart

    10x10 (254x254mm) BuildTak Sheet - 2 Pack | BuildTak

    BuildTak

    $27.95
    Pack of 2 BuildTak Original Sheets - 10x10  10x10 inches (254x254 mm) Creates an optimal bond between the 3D printed object and build surface Allows for clean and easy removal of the object from the build surface More durable and easier...
    SKU:
    BTAK-10X10-2PK
    $27.95
    Add to Cart
  • 10x10 PEI BuildTak Build Sheet
    Add to Cart

    10x10 PEI Sheet - 2 Pack | BuildTak

    BuildTak

    $36.00
    BuildTak PEI Sheets - 10x10  Sold in pack of 2 sheets An ideal print surface for any 3D printer with a 10x10 print bed. Manufactured right here in the USA to ensure consistent quality and composition, the BuildTak Polyetherimide (PEI)...
    SKU:
    BTAK-PEI-10X10-2PK
    Fits:
    INTAMSYS FUNMAT HT
    $36.00
    Add to Cart
  • 12x12 PEI BuildTak Build Sheet
    Add to Cart

    12x12 PEI Sheet - 2 Pack | BuildTak

    BuildTak

    $50.00
    BuildTak PEI Sheets - 12x12 Sold in pack of 2 sheets An ideal print surface for any 3D printer with a large 12x12 print bed. Manufactured right here in the USA to ensure consistent quality and composition, the BuildTak Polyetherimide (PEI) build...
    SKU:
    BTAK-PEI-12X12-2PK
    Fits:
    Creality CR-10
    Fits:
    Creality CR-10S
    $50.00
    Add to Cart
  • 235*235 PEI BuildTak Build Sheet
    Add to Cart

    235x235 PEI Sheet - 2 Pack | BuildTak

    BuildTak

    $35.95
    Pack of 2 BuildTak PEI Sheets - 9.25"x9.25" (235x235mm) Manufactured right here in the USA to ensure consistent quality and composition, the BuildTak Polyetherimide (PEI) build surfaces are made from premium PEI equipped with the no-cleanup...
    SKU:
    BTAK-PEI-235X235-2PK
    $35.95
    Add to Cart
  • Robo R1/+ bed magnets
    Add to Cart

    3mm Bed Magnets (4 Pack) - R1/+ | Robo 3D

    Robo 3D

    $2.99
    3mm Bed Magnets for R1/+ Glass Bed Please note: These magnets are 3mm thick and do not work with the latest v2.5 R1 bed, which requires 6mm magnets. Apply using epoxy and these clamps for best results. Sold in pack of 4  Fits: R1 and...
    SKU:
    R1-BED-MAG-4PK
    $2.99
    Add to Cart
  • MakerGear 12v Extruder Fan 40x10mm for M2
    Add to Cart

    40x10mm 12v Fan - M2 | MakerGear

    MakerGear OEM

    $15.00
    MakerGear M2 Extruder Fan - 40x10mm, 12 volt  This is the smaller of the two fans mounted in front of the extruder and also used inside the electronics case. This fan has a keyed connector, guarding against incorrect plug-in. All...
    SKU:
    MG-EXTFAN-4010-12
    Fits:
    M2 12v
    $15.00
    Add to Cart
  • MakerGear Extruder Fan 40x10mm
    Add to Cart

    40x10mm 24v Extruder Fan | MakerGear

    MakerGear OEM

    $15.00
    Replacement Extruder Fan 40x10mm, 24 volt for your MakerGear M2/M3 3D printer This is the smaller of the two fans mounted in front of the extruder and also used inside the electronics case. This fan has a keyed connector, guarding against...
    SKU:
    MG-EXTFAN-4010-24
    Fits:
    M2
    Fits:
    M3-SE
    Fits:
    M3-ID
    $15.00
    Add to Cart
  • MakerGear bed fan
    Add to Cart

    40x15mm 24v M3 Bed Fan | MakerGear

    MakerGear OEM

    $15.00
    24-Volt, 40x15mm replacement bed fan for your MakerGear M3 This fan has a keyed connector, guarding against incorrect plug-in. All fans should be kept free of dust buildup to prevent failure.     
    SKU:
    MG-BEDFAN-4015-24
    Fits:
    M3-SE
    Fits:
    M3-ID
    $15.00
    Add to Cart
  • MakerGear bed fan
    Add to Cart

    40x15mm MakerGear M3 Bed Fan

    PB3D Parts™

    Regular Price: $15.00
    $12.95
    24-Volt, 40x15mm replacement bed fan for your MakerGear M3 This fan has a keyed connector, guarding against incorrect plug-in.  Fits: All MakerGear M3s    
    SKU:
    PBX-MG-BEDFAN-24
    Regular Price: $15.00
    $12.95
    Add to Cart
  • MakerGear 12 Volt Extruder Fan 50x50x10
    Add to Cart

    50x10mm 12v M2 Extruder Fan | MakerGear

    MakerGear OEM

    $15.00
    M2 Extruder Fan - 50x50x10mm, 12 volt  Mounted at a 45 degree angle in front of the extruder's 40mm fan, this 50mm fan provides users with greater control over the cooling rate of extruded filament material. This fan has a keyed...
    SKU:
    MG-EXTFAN-5010-12
    Fits:
    M2 12v
    $15.00
    Add to Cart
  • Fan for MakerGear M2 Dual
    Add to Cart

    50x10mm 24v M2 Dual Extruder Fan | MakerGear

    MakerGear OEM

    $15.00
    MakerGear M2 Dual Extruder Fan 50x10mm - 24v  This fan has longer leads to accommodate the M2 Dual 3D Printer Mounted at a 45 degree angle in front of the extruder's 40mm fan, this 50 mm fan provides users with greater control over...
    SKU:
    MG-EXTFAN-5010-24-DUAL
    Fits:
    M2 24v
    $15.00
    Add to Cart
  • MakerGear Extruder Fan 50x50x10 12 Volt
    Add to Cart

    50x10mm 24v M2 Extruder Fan | MakerGear

    MakerGear OEM

    $15.00
    M2 Replacement Extruder Fan - 50x50x10mm, 24 volt Mounted at a 45 degree angle in front of the extruder's 40mm fan, this 50 mm fan provides users with greater control over the cooling rate of extruded filament material. This fan has a...
    SKU:
    MG-EXTFAN-5010-24
    Fits:
    M2 24v
    $15.00
    Add to Cart
  • Robo R1/+ bed magnets - 6MM
    Add to Cart

    6mm Bed Magnets (4 Pack) - R1 and R1 Plus | Robo 3D

    PB3D Parts™

    $2.99
    6mm Bed Magnets for R1/+ Glass Bed Please note: These magnets are 6mm thick work with both earlier beds and the latest v2.5 R1 bed, which requires 6mm magnets. Apply using epoxy and these clamps for best results. Sold in pack of 4  Fits: R1...
    SKU:
    R1-BED-MAG-4P-6MM
    Fits:
    Robo R1+
    $2.99
    Add to Cart
  • MakerGear OEM 8x10 Glass Build Surface
    Add to Cart

    8x10 Glass Build Surface | MakerGear

    MakerGear OEM

    $26.00
    8x10 Build Surface from MakerGear Made from borosilicate glass, this 8" x 10" x 0.13" (20 cm x 25 cm x 3.3 mm) build plate provides a perfect print surface when properly coated in a film of polyimide tape, GeckoTek or BuildTak. For use with the...
    SKU:
    MG-BUILDSURFACE
    Fits:
    M2
    Fits:
    M3-ID
    Fits:
    M3-SE
    Size:
    8x10
    $26.00
    Add to Cart
  • 8x10 BuildTak Build Sheet
    Add to Cart

    8x10 Original BuildTak Sheet - MakerGear M2 & M3

    BuildTak

    $14.95
    BuildTak Sheet - an ideal build surface for the MakerGear M2 & M3 Sold in units of one 8x10 inches (203x254 mm) Creates an optimal bond between the 3D printed object and build surface Allows for clean and easy removal of the object from the...
    SKU:
    BTAK-8X10
    Fits:
    M2
    Fits:
    M3-SE
    Fits:
    M3-ID
    Size:
    8x10
    $14.95
    Add to Cart
  • 8x10 PEI BuildTak Build Sheet
    Add to Cart

    8x10 PEI Sheet - 2 Pack | BuildTak

    BuildTak

    $32.00
    BuildTak PEI Sheets (2 Pack) - 8x10  An ideal print surface for the MakerGear M2, M3 and other 8x10 print beds. Manufactured right here in the USA to ensure consistent quality and composition, the BuildTak Polyetherimide (PEI) build...
    SKU:
    BTAK-PEI-8X10-2PK
    Fits:
    M2
    Fits:
    M3-SE
    Fits:
    M3-ID
    $32.00
    Add to Cart
  • 8x10 PEI Sheet | BuildTak
    Add to Cart

    8x10 PEI Sheet | BuildTak

    BuildTak

    $17.00
    BuildTak PEI Sheet - 8x10  Sold in units of one. Buy a 2 pack of 8x10 PEI sheets here Buy a 3 pack of 8x10 PEI sheets here An ideal print surface for the MakerGear M2, M3 and other 8x10 print beds. Manufactured right here in the USA...
    SKU:
    BTAK-PEI-8X10
    $17.00
    Add to Cart
  • 8x8 PEI BuildTak Build Sheet
    Add to Cart

    8x8 PEI Sheet - 2 Pack | BuildTak

    BuildTak

    $24.00
    BuildTak PEI Sheets - 8x8 Sold in pack of 2 sheets An ideal print surface for any 3D printer with a 8x8 print bed. Manufactured right here in the USA to ensure consistent quality and composition, the BuildTak Polyetherimide (PEI) build surfaces...
    SKU:
    BTAK-PEI-8X8-2PK
    Fits:
    Original Prusa i3
    $24.00
    Add to Cart
  • 9x10 PEI BuildTak Build Sheet
    Add to Cart

    9x10 PEI Sheet - 2 Pack | BuildTak

    BuildTak

    $36.00
    BuildTak PEI Sheets - 9x10  Sold in pack of 2 sheets An ideal print surface for the Original Prusa i3 MK2 and MK3 Printers and other 9x10 print beds. Manufactured right here in the USA to ensure consistent quality and composition,...
    SKU:
    BTAK-PEI-9X10-2PK
    Fits:
    Prusa i3 MK2
    Fits:
    Prusa i3 MK3
    $36.00
    Add to Cart
  • Micro Swiss All Metal Hotend Kit - CR10
    Add to Cart

    All Metal Hotend Kit for CR10/Ender/Tornado/X5S/U20 | Micro Swiss

    Micro-Swiss

    $63.50
    Micro Swiss All Metal Hotend Kit for CR-10/Ender/Tornado/X5S/U20 Kit includes 0.40mm nozzle  Key benefits: No printer modification needed - this kit is a drop-in replacement for the CR-10. Faster heat dissipation - Micro Swiss has...
    SKU:
    MS-AMHK-M2583-04
    Fits:
    Creality CR-10
    $63.50
    Add to Cart
  • CR10 S Pro All Metal Hotend
    Add to Cart

    All Metal Hotend Kit for Creality CR-10S Pro | Micro Swiss

    Micro-Swiss

    $63.50
    Micro Swiss All Metal Hot End for Creality CR10S Pro Kit comes standard with a 0.40mm nozzle. Fits: CR-10s Pro CR-10s Pro V2 CR-10 Max  Key benefits of the Micro Swiss All Metal Hotend: A common complaint of the CR10S Pro is that it...
    SKU:
    MS-AMHK-M2591-04
    Fits:
    CR-10s Pro
    Fits:
    CR-10s Pro V2
    Fits:
    CR-10 Max
    $63.50
    Add to Cart
  • MakerGear M3 Motor Mount
    Add to Cart

    Aluminum Motor Mount for M3 | MakerGear

    MakerGear OEM

    $29.95
    Aluminum Motor Mount.   This is the extruder motor mount that comes standard on the M3ID and M3SE Rev.1 machines M3x22 bolts included  
    SKU:
    MG-MOUNT-ALUM
    Availability:
    Price TBA
    Fits:
    M3
    $29.95
    Add to Cart
  • Flashforge v-bearing
    Add to Cart

    Bearing (V Type) | Flashforge

    Flashforge OEM

    $3.99
    Flashforge V Bearing  Fits: Adventurer 3 Creator 3 Creator Pro/Max Dreamer Dreamer NX Finder 2.0 Guider 2 Guider 2S HT Inventor Inventor 2 Sold in units of 1
    SKU:
    FLF-BEAR-V-CRP
    $3.99
    Add to Cart
  • Dreamer Y Axis Drive Shaft Bearing
    Add to Cart

    Bearing - Y Drive Shaft - Dreamer/Inventor | Flashforge

    Flashforge OEM

    $2.99
    Flashforge Flange Bearing This is the bearing that goes on the inner side of the pulley on the Y axis drive shaft. Fits: Dreamer Dreamer NX Inventor Sold in units of 1, two bearings are needed per shaft
    SKU:
    FLF-BEAR-DRM
    Fits:
    Dreamer
    Fits:
    Dreamer NX
    Fits:
    Inventor
    $2.99
    Add to Cart
  • Bearing for under Build Tray - Adventurer 3
    Add to Cart

    Bearing Under Build Tray - Adventurer 3

    Flashforge OEM

    $2.99
    Bearing Under Build Tray Size: 12x4x4 Fits: Adventurer 3 Compatible with: MP Voxel Robo E3
    SKU:
    FLF-BEAR-BP-ADV3
    Fits:
    Adventurer 3
    Fits:
    MP Voxel
    Fits:
    Robo E3
    $2.99
    Add to Cart
  • MakerGear M3 Bed Heater
    Add to Cart

    Bed Heater | MakerGear

    MakerGear OEM

    $30.00
    Replacement Bed Heater for MakerGear M2 & M3  Silicone bed heater, includes header plug. Fits: MakerGear M2 (24v) MakerGear M3
    SKU:
    MG-BEDHEATER
    Fits:
    M2 24v
    Fits:
    M3-SE
    Fits:
    M3-ID
    $30.00
    Add to Cart
  • Flashforge Bed leveling Bolts
    Add to Cart

    Bed Leveling Bolt - 3 Pack - Creator Pro, Dreamer, Inventor | Flashforge

    Flashforge OEM

    $1.99
    Flashforge Bed Leveling Bolt - 3 Pack Fits:  Inventor Creator Pro Creator Pro 2 Creator Max Dreamer Note: Bed Leveling Nuts and Bed Leveling Springs not included.  
    SKU:
    FLF-LVLBOLT-CRP-3PK
    Fits:
    Creator Pro
    Fits:
    Creator Pro 2
    Fits:
    Creator Max
    Fits:
    Dreamer
    Fits:
    Dreamer NX
    Fits:
    Inventor
    $1.99
    Add to Cart