Parts, Accessories & Supplies

5 Amp DC-DC Buck Converter XL4015 Input voltage 4.0 ~ 38V Adjustable output voltage range 1.25V ~ 35V (Input voltage must be higher than the output voltage by 1.5V) Output current 4A recommended (up to 5A) Power indicator light Includes heat sink ...

  Extra FlexPlate Note: This is not the Complete Builtak Flexplate System. This is the FlexPlate only and requires a magnetic mounting base and print surface. - Specially-coated FlexPlates are resistant to rust and work on both...

Extra FlexPlate Please Note: This is not the Complete Builtak Flex System. This is the FlexPlate only and requires a magnetic mounting base and print surface. Specially-coated FlexPlates are resistant to rust and work on both heated...

  Replacement BuildTak FlexPlate for Robo R2 Flexplate System Includes: FlexPlate (1 pcs) Size 9x9in Fits: Robo R2 Please Note: This is not the Complete Builtak FlexPlate System. This is an individual replacement...

  BuildTak FlexPlate System The original magnetic build surface and still one of the best available.  Benefits:Easy print removalBetter adhesion of prints with the BuildTak print surfaceSwap flexplates when a print is finished for more...

BuildTak FlexPlate System Size: 165x165mm (6.5x6.5in) Includes:  Original BuildTak print surface (1 pcs) Spring steel sheet (1 pcs) Magnetic base (1 pcs) Fits:  Ender 2 printers with a 165x165 print bed

BuildTak FlexPlate System Size: 235x235mm (9.25x9.25in) Includes:  Original BuildTak print surface (1 pcs) Spring steel sheet (1 pcs) Magnetic base (1 pcs) Fits:  Ender 3 printers with a 235x235 print bed

Bondtech PC2510 to JST-XH6 Cable PC2510 4-pin connector to JST-XH6 6-pin connector. This cable is by default wired for the Bondtech 40mm geared Nema17 motor. Please make sure that it follows the schematics for your application. Controller side ...

Extension Cable, Stepper Motor to Dupont 4 (No Latch). Approximately 1 meter long Nema 17 stepper motor 6-pin connector to Dupont 4-pin connector. The default wiring for this extension cable is listed below. You may need to switch the pins...

Extension Cable, Stepper Motor to Dupont 4 (No Latch). Approximately 1 meter long Nema 17 stepper motor 6-pin connector to Dupont 4-pin connector. The default wiring for this extension cable is listed below. You may need to switch the...

Bondtech JST-XH4 Cable JST-XH4 4-pin connector to JST-XH6 6-pin connector. This cable is by default wired for the Bondtech 40mm geared Nema17 motor. Please make sure that it follows the schematics for your application. Controller side   ...

Extension Cable, Stepper Motor to XH2.54 4 Pin Approximately 2 meter long Nema 17 stepper motor 6-pin connector to XH2.54 4-pin connector The default wiring for this extension cable is listed below. You may need to switch the pins around to...

Universal BLTouch Cable - 1 Meter This is one long cable that plugs directly into the BLTouch and eliminates the additional joints created when using other BLTouch extension cables. Comes standard with BLTouch connector on one end and a Dupont 3 pin...

Universal BLTouch Cable - 1.5 Meter This is one long cable that plugs directly into the BLTouch and eliminates the additional joints created when using other BLTouch extension cables. Comes standard with BLTouch connector on one end and a Dupont 3 pin...

Universal BLTouch Cable - 2 Meter This is one long cable that plugs directly into the BLTouch and eliminates the additional joints created when using other BLTouch extension cables. Comes standard with BLTouch connector on one end and a Dupont 3 pin...

    Slice Engineering Extension Cable for Fan or Thermistor Includes: Cable (1 pcs) Specifications:1 meter longEnd A: Molex Micro-Fit 3.0 connectorEnd B: Dupont style connector

Cable for LDO Orbiter V2.0 Filament Sensor Length: 2 meters

Stepper Motor Cable with Latch Length: 1 meter Connectors: 4-pin Dupont w/latch to JST-XH6 6 pin. This is a universal cable. Depending on your setup you may need to relocate the pins in the connector housing Controller Side     Motor...

  BLTouch Cable SM-125 Cable for the BLTouch bed sensor. Includes: Cable (1 pcs) Length: 1 meter Connectors:Side A: PicoBlade 5 pinSide B: PicoBlade 5 pin Number of wires: 5 Note: This is a universal extension cable, so you may need...

  BLTouch Cable SM-XD Cable for the BLTouch bed sensor. One end has a pico blade connector for connecting to the BLTouch, the other side has a Dupont and XH2P connector. Includes: Cable (1 pcs) Length: 1 meter Connectors:Side A:...