PolySupport - Break Away Support Material 1.75mm | Polymaker

PolySupport - Break Away Support Material

Diameter: 1.75mm
Weight: 750g
Color: Natural 

This is a break away support for PLA based filaments. It has a perfect interface with PLA, strong enough to support it and easily removable by hand.

PolySupport™ is designed specifically for Polymaker PLA. However Polymaker has had positive customer feedback on using PolySupport™ with PolySmooth™, PolyCast™ and small PolyMax™ PC parts.

Works with:
PLA

Print Settings

These settings are recommended by Polymaker and are meant as a starting point to help find your optimal print settings. They should work for most 3D printers; however, you may need to experiment outside these ranges.

Printing Temperature: 220˚C - 230˚C
Bed Temperature: 25˚C - 60˚C
Printing Speed: 20mm/s - 40mm/s
Fan: ON

Direct Drive:
Retraction Distance: 1mm
Retraction Speed: 20mm/s
Indirect Drive:
Retraction Distance: 3mm
Retraction Speed: 40mm/s

Drying Settings: 55˚C for 6h
(Only if the material has absorbed moisture)

PolySupport™ Technical Data Sheet