24v Power Supply for Robo R2 3D Printer
Please note: AC power cable is not included. You can either use the AC power cable from your existing power supply or purchase a power cable here...
R1+ Thermistor Wire
Runs from mainboard to thermistor
Will also work for the heatsink fan or print cooling fan but the connector is not keyed so you need to pay attention to the...
3mm Bed Magnets for R1/+ Glass Bed
Please note: These magnets are 3mm thick and do not work with the latest v2.5 R1+ bed, which requires 6mm magnets.
Apply using epoxy and these clamps for...
Robo R1+ Hexagon Hot End Assembly
For 1.75mm filament
Includes:
Complete Hotend12V Heater CartridgeThermistor (the thermistor wire is very delicate, please handle with care)0.40mm Brass...
Robo R1+ Heated Bed Connection Cable
If you currently have a V1 bed with a long cable, you will need this extension cable if you are upgrading to the v2 bed (which has a short cable). Buy...
Robo R1/R1+ Compatible Heater Cartridge Extension Cable
Extension cable for R1/R1+ heater cartridge
This cable has a plug on one end to plug into the R1/R1+ heater cartridge wire and bare...
Robo R1+ Heated Glass Build Plate - New Style
Important: Please read all the notes below before purchasing.
If your current bed does not have the plug seen in the picture of the bed, you will also...