Parts Finder
Select a brand to find printer specific parts.
-
Build Plate Heater for SV06 Plus | Sovol
Sovol
$69.95Build Plate Heater for SV06 Plus Includes: Aluminum bed heater assembly (1 pcs)Magnetic sheet - installed (1 pcs)Insulation - installed (1 pcs) Fits: SV06 Plus Note: Does not include build plate/print surface or mounting hardware.$69.95 -
Flange Screw - M3x5 mm (Phillips Head)
PB Select™
$0.59Flange Screw This screw is usually used to hold a bead thermistor in the heater block. Includes: Flange screw (1 pcs) Size: M3x5mm$0.59 -
Revo ObXidian High Flow Nozzle | E3D
E3D
$64.95Revo™ High Flow ObXidian Nozzle The Revo High Flow ObXidian combines the Obxidian and High Flow features into one nozzle. Includes: Revo nozzle of selected size (1 pcs) High Flow Features: The Revo High Flow nozzle increases...$64.95 -
30 Pin, 650mm Flat Cable - Sidewinder X1 | Artillery
Artillery
$9.95Artillery 30Pin, 650mm, FFP Cable Includes: Cable (1 pcs) Length: 650mmPins: 30 Fits: Sidewinder X1$9.95 -
3D Print Removal Tool - Scraper
Flashforge
$3.99Flashforge 3D Print Removal Tool Spatula for removing 3D prints from the build surface. This is the same tool that is provided with many of the new Flashforge 3D printers. Includes: Spatula (1 pcs)$3.99 -
3D Print Removal Tool - Scraper | Artillery
Artillery
$4.993D Print Removal Tool - Scraper This is the model that comes with new Artillery printers. It can be used with any printer. Includes: Scraper (1 pcs)$4.99 -
3mm Bed Magnets (4 Pack) - R1+ | Robo 3D
Robo 3D
$3.493mm Bed Magnets for R1/+ Glass Bed Apply using epoxy and clamps for best results. Includes: Magnet (4 pcs) Fits:Robo R1Robo R1+ Note: These magnets are 3mm thick and do not work with the latest v2.5 R1+ bed, which...$3.49 -
3mm Filament for Prusa Wiring Harness Support | Prusa Compatible
PB Select™
$1.99PB Select™ 3mm Nylon Filament This 3mm nylon filament is used in the wiring harness of Prusa i3 printers.The length is 50cm which is the proper length for the extruder wiring harness. It can be cut down to 30cm if you need it...$1.99 -
4010 Fan (12 volt) M2 | MakerGear
MakerGear OEM
$15.004010 Extruder Fan for MakerGear M2 - 12 volt Includes: Fan (1 pcs) Voltage: 12 VDCSize: 40x40x10mmLocation: Extruder or electronics case Fits: M2 (12 volt version) This is the smaller of the two fans mounted in front...$15.00 -
40mm Metal Fan Guard
PB Select™
$1.99PB Select™ Metal Fan Guard Includes: Fan guard (1 pcs) Fits: 40x40mm fans Note: Mounting screws not included$1.99 -
40x10 Print Cooling Fan (Blower Fan) Ender 3 V2/Neo | Creality
Creality
$6.99Creality Ender-3 V2 Blower Fan This is the fan that cools the part when printing Includes: Blower Fan (1 pcs) Fits: Ender-3 V2Ender-3 V2 NeoCR-200B$6.99 -
40x10mm 24v Extruder Fan - M2*, M3 | MakerGear
MakerGear OEM
$15.004010 Extruder Fan This is the smaller of the two fans mounted in front of the extruder and also used inside the electronics case. This fan has a keyed connector, guarding against incorrect plug-in. All fans should be kept free of...$15.00 -
40x15mm 24v M3 Bed Fan | MakerGear
MakerGear OEM
$15.004015 Bed Fan This is the fan the cools the part being printed. It is sometimes called the print or part cooling fan. Includes: Fan (1 pcs) Voltage: 24 VDCSize: 40x40x15mm Fits: M3$15.00 -
40x15mm MakerGear M3 Bed Fan
PB Select™
Regular Price: $15.00$12.9524-Volt, 40x15mm replacement bed fan for your MakerGear M3 This fan has a keyed connector, guarding against incorrect plug-in. Fits: All MakerGear M3sRegular Price: $15.00$12.95 -
5010 Extruder Fan (12 volt) M2 | MakerGear
MakerGear OEM
$15.005010 Extruder Fan for MakerGear M2 - 12 volt Includes: Fan (1 pcs) Voltage: 12 VDCSize: 50x50x10mmLocation: Extruder Fits: M2 (12 volt version) Mounted at a 45 degree angle in front of the extruder's 40mm fan, this...$15.00 -
5010 Extruder Fan (24 volt) M2 Duel | MakerGear
MakerGear OEM
$15.005010 Extruder Fan for MakerGear M2 Dual Extruder - 24 volt Includes: Fan (1 pcs) Voltage: 24 VDCSize: 50x50x10mmLocation: Extruder Fits: M2 Dual Extruder This fan has longer leads to accommodate the M2 Dual 3D...$15.00 -
5010 Extruder Fan (24 volt) M2 | MakerGear
MakerGear OEM
$15.005010 Extruder Fan for MakerGear M2 - 24 volt Includes: Fan (1 pcs) Voltage: 24 VDCSize: 50x50x10mmLocation: Extruder Fits: M2 (24 volt version) Mounted at a 45 degree angle in front of the extruder's 40mm fan, this 50 mm...$15.00 -
6mm Bed Magnets (4 Pack) - R1+ | Robo 3D
PB Select™
$2.956mm Bed Magnets for R1+ Glass Bed Please note: These magnets are 6mm thick, they work with the latest v2.5 R1 bed, which requires 6mm magnets. Apply using this epoxy and clamps for best results. Includes: Bed magnet (4...$2.95 -
Activated Carbon Filter - Guider 2S | Flashforge
Flashforge
$7.95Activated Carbon HEPA Filter Includes: Activated carbon filter (1 pcs) Fits: Guider 2S/HT$7.95 -
Additional Chamber Kit for Filament Dryer Pro, Pro 3 | PrintDry
PrintDry
$53.99Important Shipping Notes - Ships to the US and Canada only- Cannot be shipped to PO boxes- Drop ships directly from PrintDry, please allow an additional 3-4 day processing time- Ships from Canada- Only ships UPS/FedEx ground, no...$53.99