Parts Finder

Build Plate Heater for SV06 Plus Includes: Aluminum bed heater assembly (1 pcs)Magnetic sheet - installed (1 pcs)Insulation - installed (1 pcs) Fits: SV06 Plus Note: Does not include build plate/print surface or mounting hardware.

Flange Screw This screw is usually used to hold a bead thermistor in the heater block. Includes: Flange screw (1 pcs) Size: M3x5mm

Revo™ High Flow ObXidian Nozzle The Revo High Flow ObXidian combines the Obxidian and High Flow features into one nozzle. Includes: Revo nozzle of selected size (1 pcs) High Flow Features: The Revo High Flow nozzle increases...

Artillery 30Pin, 650mm, FFP Cable Includes: Cable (1 pcs) Length: 650mmPins: 30  Fits: Sidewinder X1

  Flashforge 3D Print Removal Tool Spatula for removing 3D prints from the build surface. This is the same tool that is provided with many of the new Flashforge 3D printers.  Includes: Spatula (1 pcs)

3D Print Removal Tool - Scraper This is the model that comes with new Artillery printers. It can be used with any printer.  Includes: Scraper (1 pcs)

3mm Bed Magnets for R1/+ Glass Bed Apply using epoxy and clamps for best results. Includes: Magnet (4 pcs) Fits:Robo R1Robo R1+ Note: These magnets are 3mm thick and do not work with the latest v2.5 R1+ bed, which...

PB Select™ 3mm Nylon Filament  This 3mm nylon filament is used in the wiring harness of Prusa i3 printers.The length is 50cm which is the proper length for the extruder wiring harness. It can be cut down to 30cm if you need it...

  4010 Extruder Fan for MakerGear M2 - 12 volt  Includes: Fan (1 pcs) Voltage: 12 VDCSize: 40x40x10mmLocation: Extruder or electronics case Fits: M2 (12 volt version) This is the smaller of the two fans mounted in front...

PB Select™ Metal Fan Guard Includes: Fan guard (1 pcs) Fits: 40x40mm fans Note: Mounting screws not included

  Creality Ender-3 V2 Blower Fan This is the fan that cools the part when printing Includes: Blower Fan (1 pcs) Fits: Ender-3 V2Ender-3 V2 NeoCR-200B

  4010 Extruder Fan This is the smaller of the two fans mounted in front of the extruder and also used inside the electronics case. This fan has a keyed connector, guarding against incorrect plug-in. All fans should be kept free of...

  4015 Bed Fan This is the fan the cools the part being printed. It is sometimes called the print or part cooling fan.  Includes: Fan (1 pcs) Voltage: 24 VDCSize: 40x40x15mm Fits: M3    

24-Volt, 40x15mm replacement bed fan for your MakerGear M3 This fan has a keyed connector, guarding against incorrect plug-in.  Fits: All MakerGear M3s    

  5010 Extruder Fan for MakerGear M2 - 12 volt  Includes: Fan (1 pcs) Voltage: 12 VDCSize: 50x50x10mmLocation: Extruder Fits: M2 (12 volt version) Mounted at a 45 degree angle in front of the extruder's 40mm fan, this...

  5010 Extruder Fan for MakerGear M2 Dual Extruder - 24 volt  Includes: Fan (1 pcs) Voltage: 24 VDCSize: 50x50x10mmLocation: Extruder Fits: M2 Dual Extruder  This fan has longer leads to accommodate the M2 Dual 3D...

  5010 Extruder Fan for MakerGear M2 - 24 volt Includes: Fan (1 pcs) Voltage: 24 VDCSize: 50x50x10mmLocation: Extruder Fits: M2 (24 volt version) Mounted at a 45 degree angle in front of the extruder's 40mm fan, this 50 mm...

6mm Bed Magnets for R1+ Glass Bed Please note: These magnets are 6mm thick, they work with the latest v2.5 R1 bed, which requires 6mm magnets. Apply using this epoxy and clamps for best results. Includes: Bed magnet (4...

  Activated Carbon HEPA Filter Includes: Activated carbon filter (1 pcs) Fits: Guider 2S/HT

 Important Shipping Notes  - Ships to the US and Canada only- Cannot be shipped to PO boxes- Drop ships directly from PrintDry, please allow an additional 3-4 day processing time- Ships from Canada- Only ships UPS/FedEx ground, no...