Prusa
Use the search box below to narrow down the Prusa 3D Printer parts you are looking for:
-
Buddy Control Board - MINI/+ | Prusa Compatible
PB Select™
$84.95Please read our returns policy regarding electronic items PB Select™ Prusa Compatible Buddy Control Board This is a clone Buddy control board. If you are looking for the Original Prusa Buddy Board please click here. Firmware Version: 4.4.1...$84.95 -
Cable - Heatbed to Einsy for Prusa MK3/3S/3S+ | Prusa Compatible
PB Select™
$6.99PB Select™ Heatbed to Einsy power cable for Prusa (screw-attached type) Runs from mainboard to heated bed. Includes: Cable (1 pcs) Fits:MK3MK3SMK3S+ Note: Attachment screws not included To replace this part, please consult...$6.99 -
Cable - Heated Bed to RAMBo Board - Prusa MK2/2S, MK2.5/2.5S | Prusa Compatible
PB Select™
$7.99PB Select™ Heated Bed Power Cable for Prusa This is the cable that runs from the Rambo board to the heated bed. Note: ONLY compatible with the heated beds with detachable power cable. NOT compatible with heated beds where the power cable is...$7.99 -
Cable - IR Filament Sensor-Einsy - MK3 | Original Prusa
PRUSA RESEARCH
$4.99Prusa IR Filament Sensor-Einsy Cable Runs from filament sensor to mainboard. Includes: Cable (1 pcs) Fits: MK3 To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for your printer model.$4.99 -
Cable - IR Filament Sensor-Einsy - MK3S/3S+ | Original Prusa
PRUSA RESEARCH
$5.99Prusa IR Filament Sensor-Einsy Cable Runs from filament sensor to mainboard. Includes: Cable (1 pcs) Fits:MK3SMK3S+ To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for your printer...$5.99 -
Cable - PSU to Einsy for Prusa MK3/3S/3S+ | Prusa Compatible
PB Select™
$7.99PB Select™ PSU to Einsy Power Cable We use premium pure copper wire, tin plated copper connectors and adhesive heat shrink for a good quality long lasting cable. Includes: Power cable (1 pcs) Specs:Wire: 16 AWGLength: 18 inches...$7.99 -
Cable - PSU to RAMBo for Prusa MK2/S, MK2.5/S | Prusa Compatible
PB Select™
$7.99PB Select™ PSU to RAMBo Mini Power Cable We use premium pure copper wire and premium connectors for a good quality long lasting cable. Includes: Power cable (1 pcs) Note: This is only one cable. The printer needs 2 cables to run from the PSU...$7.99 -
Cable - PSU-Einsy Power Panic Cable - MK3/3S/3S+ | Original Prusa
PRUSA RESEARCH
$6.99Prusa PSU-Einsy Power Panic Cable This is a replacement PSU to Einsy power panic cable. It is ONLY compatible with the black housing PSU. Includes: PSU-Einsy power panic cable (1 pcs) Fits:MK3MK3SMK3S+ To replace this part, please...$6.99 -
Cable - V Adapter for Noctua Fan - MK2.5/2.5S | Prusa Compatible
PB Select™
$8.99PB Select™ Prusa V-Cable Adapter MK2.5 Noctua Reduction Cable. Needed to install the a 3 wire fan on the MK2.5 and MK2.5S$8.99 -
Cable for IR Filament Sensor - MK2.5S | Original Prusa
PRUSA RESEARCH
$5.99Prusa IR Filament Sensor Cable Includes: IR filament sensor cable (1 pcs) Fits: MK2.5S To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow the manual for your printer model$5.99 -
Cable for LCD Screen - MINI, MINI+
PB Select™
$4.99Flat Cable for Prusa MINI/+ Connects LCD screen to Buddy board. Includes: Cable (1 pcs) Length: 300mm Fits:Prusa MINIPrusa MINI+$4.99 -
CHT BiMetal Nozzle - M6 RepRap, Prusa, E3D V6 Etc. | Bondtech
Bondtech
$39.95Bondtech CHT BiMetal Nozzle - M6 Bondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used. Includes: Nozzle of...$39.95 -
CHT Coated Brass Nozzle - M6 RepRap, Prusa, E3D V6 Etc. | Bondtech
Bondtech
$19.95Bondtech CHT Coated Brass Nozzle - M6 Bondtech CHT® nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used...$19.95 -
Clear Gearbox Cover (No Text) for Prusa MK4 and XL | Prusa Compatible
PB Select™
$12.95Clear Gearbox Cover for Prusa Nextruder This version has no text on the front. Includes: Acrylic Cover (1 pcs) Fits: Prusa MK4Prusa XL To replace this part, please consult the Prusa Assembly Manuals. Make sure to follow...$12.95 -
Clear Gearbox Cover (With Text) for Prusa MK4 | Prusa Compatible
PB Select™
$12.95PB Select™ Clear Gearbox Cover for Prusa MK4 Nextruder This version has text embossed on the front (see picture). Includes: Acrylic Cover (1 pcs) Fits: Prusa MK4 Also fits the Prusa XL, but has MK4 embossed on the front so is...$12.95 -
CM2™ Nozzle (BiMetal) for M6 RepRap, Prusa, E3D V6, Etc. | Micro Swiss
Micro Swiss
$22.99Micro Swiss CM2 Nozzle The Micro Swiss CM2™ Nozzle is an ideal nozzle for all applications. The core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating. This special alloy retains...$22.99 -
Collet Clip (for 4mm Push Fit) Prusa, Bondtech, E3D V6, Revo - 2 pack | E3D
E3D
$0.99E3D Collet Clip Only fits this collet for 4 mm PTFE Tube. Includes: Collet clip (2 pcs) FitsE3D V6E3D Revo SixE3D Revo MiniE3D CRPrusa Bondtech$0.99 -
Control Board for MMU2S | Original Prusa
PRUSA RESEARCH
$64.95Please see our return policy regarding electronic items Control board for Prusa MMU2S Replacement control board. This has the MMU2S firmware pre-installed. Includes: Control board with MMU2S firmware (1 pcs) Fits: MMU2S To replace...$64.95 -
Copper Nozzle - M6 RepRap, Prusa, E3D V6 Etc.
PB Select™
$14.95PB Select™ Plated Copper Nozzle High precision copper nozzles is great for printing everything from PLA to PEEK.Copper has a much higher thermal conductivity than brass and these nozzles can handle high temperatures (up to 495c)...$14.95 -
CopperBlock™ - RepRap Hot Block (Prusa, E3D V6 Compatible)
PB Select™
$18.95PB Select CopperBlock™ Heater Block Nickel composite coated copper increases thermal conductivity. Includes: Heater block (1 pcs)Set screw (1 pcs)Clamping screw (1 pcs) Specifications:Plating: Nickel CompositeMax Temperature:...$18.95