R2 Parts

R2 Parts

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Robo R2/C2 Bed Nuts - 2 Pack

    Bed Nuts (2 Pack) R2/C2 | Robo 3D

    Robo 3D

    $1.49
    Robo R2/C2 Bed Nuts Fits: R2 and C2 Sold in packs of 2 
    $1.49
    Qty in Cart: 0
    Quantity:
    Price:
    $1.49
    Subtotal:
  • Robo R2-X/Y Belt

    Belt - X/Y Long - R2 (Set of 2) | Robo 3D

    Gates

    $16.95
    Robo R2 X or Y Axis Belt Set These are the long belts that run from shaft to shaft on the X and Y axis. Includes: 2 Genuine Gates PowerGrip GT belts (each axis requires 2 belts - order two sets if you need to replace the belts of both X and Y...
    $16.95
    Qty in Cart: 0
    Quantity:
    Price:
    $16.95
    Subtotal:
  • Robo R2 BuildTak Sheet

    BuildTak Print Surface - 3 Pack - R2 | Robo 3D

    Robo 3D

    $44.95
    Robo R2 BuildTak Print Surface - 3 Pack Pack of 3 replacement Buildtak sheets. Fits: R2 Buy individual R2 Buildtak sheets here
    $44.95
    Qty in Cart: 0
    Quantity:
    Price:
    $44.95
    Subtotal:
  • Robo R2 BuildTak Sheet

    BuildTak Print Surface - R2 | Robo 3D

    Robo 3D

    $16.95
    Robo R2 BuildTak Print Surface Replacement Buildtak sheet. Sold in units of 1. Fits: R2 Buy a 3 Pack of R2 BuildTak Sheets here
    $16.95
    Qty in Cart: 0
    Quantity:
    Price:
    $16.95
    Subtotal:
  • R2, C2 Downtown Board Robo Downtown Board

    Downtown Board - R2/C2 | Robo 3D

    Robo 3D

    $14.95
    Replacement Downtown Board for Robo R2 and C2 3D printers Includes the 3 screws for mounting the Downtown board.  Additional mounting screws sold here
    $14.95
    Qty in Cart: 0
    Quantity:
    Price:
    $14.95
    Subtotal:
  • Downtown Board Screw Set - R2/C2 | Robo 3D

    Robo 3D

    $0.99
    Downtown Board Screw Set Includes the 3 screws for mounting the Downtown board.  Fits: R2 and C2
    $0.99
    Qty in Cart: 0
    Quantity:
    Price:
    $0.99
    Subtotal:
  • Extruder Assembly (Red) R2/C2 | Robo 3D

    Extruder Assembly (Red) R2/C2 | Robo 3D

    Robo 3D

    $129.95
    Extruder Assembly for Robo R2/C2 with Red Accents NOTE: Does not include the hotend assembly. If needed, purchase the correct hotend assembly below: R2 Hotend Assembly C2 Hotend Assmbly  Fits: This is an R2 extruder assembly, but it will also...
    $129.95
    Qty in Cart: 0
    Quantity:
    Price:
    $129.95
    Subtotal:
  • R2/C2 Extruder Assembly Extruder Assembly - R2/C2

    Extruder Assembly - R2/C2 | Robo 3D

    Robo 3D

    $129.95
    Extruder Assembly for Robo R2/C2 NOTE: Does not include the hotend assembly. If needed, purchase the correct hotend assembly below: R2 Hotend Assembly C2 Hotend Assmbly  Fits: This is a C2 extruder assembly, but it will also fit the...
    $129.95
    Qty in Cart: 0
    Quantity:
    Price:
    $129.95
    Subtotal:
  • Robo Bearing Block Robo Bearing Block

    Extruder Bearing Block with Bearings - R2/C2 | Robo 3D

    Robo 3D

    $24.95
    Extruder Carriage Bearing Block For Robo R2 and C2 These bearing blocks are removed from brand new C2 extruder assemblies. They are new, but may show some signs of being disassembled.  Includes: Bushing block 4 linear bearings Fits: R2 and...
    $24.95
    Qty in Cart: 0
    Quantity:
    Price:
    $24.95
    Subtotal:
  • Robo 3D Extruder Carriage Bearing Robo 3D Extruder Carriage Bearing 4 pack

    Extruder Carriage Linear Bearings - 4 Pack - R2/C2 | Robo 3D

    THK

    $19.95
    Robo Extruder Carriage Linear Bearings Set of 4 high precision, THK X/Y axis linear bearings, to fit inside the extruder carriage block. Fits: C2/R2 Note: It is recommended to clean new bearings and apply a fresh coat of high quality PTFE oil...
    $19.95
    Qty in Cart: 0
    Quantity:
    Price:
    $19.95
    Subtotal:
  • Robo R2/C2 Extruder Latch Spring

    Extruder Latch Spring - R2/C2 | Robo 3D

    Robo 3D

    $0.99
    Robo R2/C2 Extruder Latch Spring  Fits: R2 and C2 printers Sold in units of 1  
    $0.99
    Qty in Cart: 0
    Quantity:
    Price:
    $0.99
    Subtotal:
  • Extruder Motor Mount Screw Set - R2/C2 | Robo 3D

    Robo 3D

    $1.99
    Extruder Motor Mount Screw Set Includes the 4 screws for mounting the extruder motor to the motor mount.  Fits: R2 and C2
    $1.99
    Qty in Cart: 0
    Quantity:
    Price:
    $1.99
    Subtotal:
  • Robo Heatsink Fan

    Fan - Heatsink - R2/C2 | Robo 3D

    PBxParts

    $8.95
    Dual Ball-Bearing Heat Sink Fan Fits: Robo R2 & C2   
    $8.95
    Qty in Cart: 0
    Quantity:
    Price:
    $8.95
    Subtotal:
  • Robo R2 and C2 Fan Mounting Bracket Robo R2 and C2 Fan Shroud

    Fan Shroud - R2/C2 | Robo 3D

    Robo 3D

    $12.95
    Fan Shroud for Robo R2 and C2 Includes magnets for mounting metal Robo plate on front. Does not include printed fan ducts that attach to the bottom. You can download the stl files for those here Fits: R2 and C2
    $12.95
    Qty in Cart: 0
    Quantity:
    Price:
    $12.95
    Subtotal:
  • R2 Filament Sensor

    Filament Sensor - R2/C2 | Robo 3D

    Robo 3D

    $12.95
    Robo Filament Sensor This is a replacement filament sensor only.  Fits: R2 and C2 Here is great write up by Tkoco on the Robo forums for replacing the filament sensor on a C2. If needed Buy the R2/C2 filament sensor block here.
    $12.95
    Qty in Cart: 0
    Quantity:
    Price:
    $12.95
    Subtotal:
  • Robo R2 Filament Sensor Block Robo Filament Sensor Block

    Filament Sensor Block - R2/C2 | Robo 3D

    Robo 3D

    $6.95
    Robo OEM Filament Sensor Block Fits: R2 and C2 This is the replacement filament sensor block only.  Buy the R2/C2 filament sensor here.
    $6.95
    Qty in Cart: 0
    Quantity:
    Price:
    $6.95
    Subtotal:
  • BuildTak FlexPlate BuildTak FlexPlate

    FlexPlate Only - R2 | BuildTak

    BuildTak

    $22.95
    Replacement BuildTak FlexPlate for Robo R2 Flexplate System Sold in units of one. Please Note: This is not the Complete Builtak FlexPlate System. This is an individual replacement FlexPlate and requires a magnetic mounting base and BuildTak print...
    $22.95
    Qty in Cart: 0
    Quantity:
    Price:
    $22.95
    Subtotal:
  • On Sale
    Robo R2 FlexPlate System Robo FlexPlate System

    Flexplate System - R2 | Robo 3D

    BuildTak

    Now: $74.95
    Regular Price: $94.95
    R2 BuildTak FlexPlate System  Please Note: This FlexPlate system is custom made for an exact fit on your Robo R2 3D printer. Standard BuildTak 8x8 FlexPlate systems do not fit the Robo R2. Easily remove 3D prints from your Robo R2...
    Now: $74.95
    Regular Price: $94.95
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $74.95
    Regular Price: $94.95
    Subtotal:
  • Total: items /

Adding your products to cart