Tools & Supplies

Flush Cut Trimmers Also called side cutters. We use these trimmers for cutting filament, removing supports and cleaning up prints.  Includes: Trimmers (1 pc)

Fuse Pack Replacement fuses for Einsy and RAMBo boards Includes:15 amp blade fuse (1 pcs)5 amp blade fuse (2 pcs) Fits:Prusa Einsy for MK3/S/+Prusa RAMBo Mini for MK2/S & MK2.5/SUltiMachine EinsyUltiMachine RAMBo Mini

Flashforge 3D Printer Grease This is the same grease that comes standard with many Flashforge 3D Printers. Size: 3 Grams Includes: Grease packet (1 pcs)

Heat-Set Insert Soldering Iron Tips High quality soldering iron tips for installing heat-set inserts into plastic objects.  Tip Type: T18 compatible Fits: PBX45S soldering IronHAKKO FX888D soldering ironOther soldering Irons that use...

PB Select™Heat-Set Insert Soldering Iron Tips These soldering iron tips are used for installing heat-set inserts into plastic objects.  Tip Type: T18 compatible Fits: PBX45S soldering IronHAKKO FX888D soldering ironOther soldering...

Heater Cartridge for Bondtech LGX Artillery Replacement 24v 50W heater for LGX Mosquito For Sidewinder. Includes: Heater cartridge (1 pcs) Fits the following Artillery printers:Sidewinder X1Sidewinder X2With the following Bondtech print...

Bondhus HexEnd L Wrench with BriteGuard Finish Size: 2mmLength: 50mmBrand: BONDHUS Note: May not come with red display card shown in picture Made in the USA

Bondhus HexEnd L Wrench with ProGuard Finish Size: 2mmLength: 50mmBrand: BONDHUS Note: May not come with red display card shown in picture Made in the USA

L-Shape Hex Wrench Size: 1.5mmLength: 78.5mmBrand: BONDHUS Made in the USA

  Hex Wrench (L Wrench) Includes: Hex wrench (1 pcs) Size: 3.0mm

  Ball End Hex Wrench - L Wrench Includes: Hex wrench (1 pcs) Size: 2.0mm 

PB Select™ Ball End Hex Wrench - L Wrench Includes: Hex wrench (1 pcs) Size: 2.5mm

Hotend Cable Guide for R1 Guides the hotend heater and thermistor cable When installing, rotate your hotend 90 degrees so the wires face the front of the printer. Designed by: Bob R.  

Heat Resistant Kapton Tape Use this tape to secure the insulation to your Flashforge heater block. Includes: Tape roll (1 pcs) Width: 5mm Length: 33 meters

The STL file is free, but you will need to create an account, add to cart and "check out" to download it. Jonah designed this key ring separator to make taking keys (& other things) on and off key rings a little easier.  USB drive not included,...

 Important Shipping Notes - Ships to the US and Canada only- Cannot be shipped to PO boxes - Drop ships directly from PrintDry, please allow an additional 3-4 day processing time- Ships from Canada- Only ships UPS/FedEx ground, no...

Prusa Lubricant Applicator Set Includes: Lubricant 5g (1 pcs)Applicator (1 pcs) After a certain period of time (see the 3D Printing Handbook), your printer should be cleaned and greased in order to work properly.  No need to apply...

Prusa Lubrication set   Lubrication set for linear rails (3-6 months interval). Includes: Lubricant 5g (1 pcs)Applicator (1 pcs) After a certain period of time (see the 3D Printing Handbook), your printer should be cleaned...

M2 Brass Thread Insert - 4 Pack Thread Size: M2 OD: 3mm Length: 3mm Recommended hole diameter: 2.9 mm Includes: 4 thread inserts For easy installation use the heat-set insert soldering iron tip by Virtjoule

M2.5 Brass Thread Insert - 4 Pack Heat-Set or also called hot-melt thread inserts Size: M2.5 Diameter: 3.55mm Length: 4mm Recommended hole diameter: 3.10 mm For easy installation use the heat-set insert soldering iron tip by Virtjoule