Description
Polymaker PolyMide™ PA6-CF (carbon fiber reinforced nylon)
PolyMide™ PA6-CF is a carbon fiber reinforced PA6 (Nylon 6) filament. The material exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion.
Color: Black
Diameter: 1.75mm
Weight: 500g
Note: Use a wear resistant nozzle
Print Settings
Based on 0.4 mm nozzle and Simplify 3D v.4.0. Printing conditions may vary with different printers and nozzle diameters.
Nozzle: 280˚C – 300˚C
Bed: 25˚C – 50˚C (Do NOT exceed 50˚C)
Fan Speed: Off
Print Speed: 30mm/s – 60mm/s
Print Surface: Almost any surface with a thin coat of PVA glue or DimaFix
Drying Settings: 100˚C for 8h
Recommended Support Materials: PolyDissolve™ S1
Notes:
Annealing settings: 80˚C for 6h
Mechanical Properties
Young’s Modulus: 7453 ± 656 (MPa)
Tensile Strength: 105.0 ± 5.0 (MPa)
Bending Strength: 169.0 ± 4.7 (MPa)
Charpy Impact Strength: 13.34 ± 0.52 (kJ/m2)
Thermal Properties
Heat Deflection Temperature (ISO 75 1.8 MPa): 196 ˚C
Heat Deflection Temperature (ISO 75 0.45 MPa): 215 ˚C
Melting Temperature: 220 (°C)
Additional Information
Series: |
PolyMide™ |
Material: |
Nylon |
Diameter: |
1.75 mm |
Weight: |
500g |
Color: |
Black |
Feature: |
Composite - Carbon/Glass |