Robo R1

  Flashforge 3D Print Removal Tool Spatula for removing 3D prints from the build surface. This is the same tool that is provided with many of the new Flashforge 3D printers.  Includes: Spatula (1 pcs)

3D Print Removal Tool - Scraper This is the model that comes with new Artillery printers. It can be used with any printer.  Includes: Scraper (1 pcs)   Note: This new version from Artillery has a slightly thinner handle...

3D Print Removal Tool - Scraper This is the model that comes with new Artillery printers. It can be used with any printer.  Includes: Scraper (1 pcs)

3mm Bed Magnets for R1/+ Glass Bed Apply using epoxy and clamps for best results. Includes: Magnet (4 pcs) Fits:Robo R1Robo R1+ Note: These magnets are 3mm thick and do not work with the latest v2.5 R1+ bed, which...

6mm Bed Magnets for R1+ Glass Bed Please note: These magnets are 6mm thick, they work with the latest v2.5 R1 bed, which requires 6mm magnets. Apply using this epoxy and clamps for best results. Includes: Bed magnet (4...

608ZZ Roller Bearing Includes: Bearing (1 pcs) Specifications:ID: 8mmOD: 22mmW: 7mm Fits:Robo R1+Prusa MINIPrusa MINI+Prusa MMU2S

608ZZ Roller Bearing A nice quality roller bearing with metal covers to keep dirt out of the rolling elements. Includes: Bearing (1 pcs) Specifications:ID: 8mmOD: 22mmW: 7mm

Robo R1+ Heated Bed Connection Cable  You will need this extension cable if you are upgrading from a v1 bed (with a long cable) to the v2 bed (which has a short cable). Buy the R1+ heated glass V2 bed here. Includes: Cable (1...

Robo R1+ X Axis Belt Includes: Belt (1 pcs) Location: X axis Length: 810mm Fits:Robo R1Robo R1+

Robo R1+ Y Axis Belt  Includes: Belt (1 pcs) Location:  Y axis Length: 500mm Fits: Robo R1Robo R1+ 

Boron Nitride Thermal Paste (BN Paste) Thermal paste improves heat conduction and heat distribution in the hotend. Contains high quality ZYP™ Boron Nitride and proprietary binders which reduce cracking and flaking when dried...

Brim Scraper (Mini Scraper) We find this tool handy for removing the brim, and purge lines from the build plate. Includes: Brim Scraper (1 pcs)

  Extra FlexPlate Note: This is not the Complete Builtak Flexplate System. This is the FlexPlate only and requires a magnetic mounting base and print surface. - Specially-coated FlexPlates are resistant to rust and work on both...

  BuildTak FlexPlate System The original magnetic build surface and still one of the best available.  Benefits:Easy print removalBetter adhesion of prints with the BuildTak print surfaceSwap flexplates when a print is finished for more...

SD to RAMPs cable Connects SD card reader to RAMPs board. Includes: Cable (1 pcs) Fits:Robo R1Robo R1+

Cable for Extruder Motor  Runs from extruder motor to mainboard of Robo R1+  Includes: Cable (1 pcs) Fits: Robo R1+Robo R1

Power Supply Cable This cable runs from the power inlet to the power supply of the Robo R1+ Includes:  Cable (1 pcs) Fits:Robo R1Robo R1+

R1+ Fan Cable (Wire) Runs from mainboard to print cooling fan. Will also work for the heatsink cooling fan, but the wires will need to be reversed or the fan runs backwards.  Includes: Cable (1 pcs) Fits: R1+

R1+ Thermistor Cable (wire) Runs from mainboard to thermistor.Will also work for the heatsink fan or print cooling fan but pay attention to the orientation of the plug (at the mainboard) so the fan does not run backwards. Includes: Cable...

Cable (wire) for X endstop limit switch Includes: Cable (1 pcs) Fits: Robo R1Robo R1+

X Stepper Motor Cable for Robo 3D Printers This cable is for the R2 X motor but also fits the Robo C2 and R1/+ Includes: Cable (1 pcs) Length: 700mm Fits: R2C2R1R1+

Cable (wire) for Y endstop limit switch Includes: Cable (1 pcs) Fits:Robo R1Robo R1+

Cable (wire) for Z endstop limit switch Includes: Cable (1 pcs) Fits: Robo R1+

PB Select™ Plated Copper Nozzle High precision copper nozzles is great for printing everything from PLA to PEEK.Copper has a much higher thermal conductivity than brass and these nozzles can handle high temperatures (up to 495c)...

3D Print Cleanup Tool This deburring tool is great for cleaning the brim off the long, straight edges of your 3D prints. We find it easier to use than an Exacto knife, because the blade doesn't dig into the plastic print as easily. The swivel head makes...

HARDMAN DOUBLE/BUBBLE 2 Part Epoxy - Very High Peel Strength - Orange This is the epoxy we use for attaching the magnets to the R1/+ glass print bed. Full curing time is stated to be 7 days. However, when applying magnets to the R1 glass bed, we...

Robo R1+ Extruder Lever Axle Shaft  Includes: Shaft (1 pcs) Fits:Robo R1Robo R1+

Robo R1+ Extruder Bracket  Includes: Bracket (1 pcs) Fits:Robo R1Robo R1+ 

Robo R1+ Big Extruder Drive Gear  Includes: Gear (1 pcs) Fits:Robo R1Robo R1+ 

Robo R1+ Small Extruder Drive Gear Includes: Gear (1 pcs) Fits:Robo R1Robo R1+ 

R1+ Extruder Hardware Kit  This includes the screws, nuts, bolts washers and springs needed for your R1+ extruder. Note: Does not include hobbed bolt, Axle Shaft or Idler bearing. These will need to be purchased separately. Fits: Robo R1+

Robo Extruder Latch  Includes:  Latch (1 pcs) Fits:Robo R1Robo R1+

Robo Fan Bracket  This is the bracket that holds the heatsink cooling fan Includes: Bracket (1 pcs) Fits:Robo R1Robo R1+

Robo R1+ Bottom Cover Fan for Cooling Electronics This is the fan that cools the Arduino and RAMPs board in the bottom of the printer Includes: Fan (1 pcs) Amps: 0.08 Fits:Robo R1Robo R1+ Note: The color of the plug may differ from the photo above...

Heatsink Fan for Robo R1 3D Printers This is the fan that cools heatsink (cold end) of the hotend assembly. Includes: Fan (1 pcs) Fits: Robo R1Robo R1+  Note: The color of the plug may differ from the photo above. 

Robo R1+ Print Cooling Fan This is the fan that cools the part being printed. Includes: Fan (1 pcs) Amps: 0.08 Fits:Robo R1Robo R1+ Note: The color of the plug may differ from the photo above. 

Ferrite Core Anti-Interference Ring Includes: Ferrite ring (1 pcs) Fits wire up to 4mm

Robo R1+ Filament Guide Includes: Plastic guide (1 pcs) Fits:Robo R1Robo R1+

Flush Cut Trimmers Also called side cutters. We use these trimmers for cutting filament, removing supports and cleaning up prints.  Includes: Trimmers (1 pc)

PB Select™ GT2 Stepper Motor Drive Pulley Recommended for use with Gates GT2/3 or other GT belts Includes: Idler pulley (1 pcs)Set screw (2 pcs) Fits: 6mm BeltTeeth: 20Width: 7mmBore: 5mmOuter diameter:15mm

Robo R1+ Heated Glass Build Plate - New Style Important: Please read all the notes below before purchasing. If your current bed does not have the plug shown in the picture of the bed, you will also need to purchase the R1+ bed connection cable...

Robo R1/R1+ Heater Cartridge Robo 3D replacement heater cartridge (also called a heater core) Includes: Heater cartridge (1 pcs) Fits: Robo R1Robo R1+

Robo R1/R1+ Heater Cartridge Extension Cable Extension cable for R1/R1+ heater cartridge  This cable has a plug on one end to plug into the R1/R1+ heater cartridge wire and bare wires (no plug) at the other end, so it will attach to your current...

PB Select™ Black Heatsink for Nema17 Stepper Motor Heatsink in black anodized aluminum to remove heat from desired component.Equipped with self-adhesive on the back for easy attachment. Includes: Heatsink (1 pcs) Size: 40x40x10 mm

Heatsink for Stepper Drivers Aluminum heatsink to remove heat from desired component.Self-adhesive on the back for easy attachment. Includes: Heatsink (5 pcs) Dimensions: 8.8 x 8.8 x 5 mm (+/- .15mm)

L-Shape Hex Wrench Size: 1.5mmLength: 78.5mmBrand: BONDHUS Made in the USA

  Ball End Hex Wrench - L Wrench Includes: Hex wrench (1 pcs) Size: 2.0mm 

PB Select™ Ball End Hex Wrench - L Wrench Includes: Hex wrench (1 pcs) Size: 2.5mm

Robo Hobbed Bolt v2 This hobbed bolt has a wider filament path than the v1 (the v1 is no longer available). Includes: Hobbed bolt (1 pcs) Fits:Robo R1Robo R1+

Hotend Cable Guide for R1 Guides the hotend heater and thermistor cable When installing, rotate your hotend 90 degrees so the wires face the front of the printer. Designed by: Bob R.  

Robo R1+ Hotend Quick Release Plate This plate locks the hotend in place. Hardware not included.  Includes: Hotend plate (1 pcs) Fits: Robo R1Robo R1+ 

Robo R1+ Leadscrew Nut Includes: Leadscrew Nut (2 pcs) Fits: Robo R1+Robo R1 with upgraded Z axis

Robo R1+ Limit Switch - Z Axis  Includes: Limit switch (1 pcs) Fits: R1+ 

Limit Switch (endstop) Includes: Limit switch (1 pcs) Location: X/Y Axis Fits:Robo R1Robo R1+ 

MYT™ LM8UU Precision Linear Bearings Includes: Linear bearing (4 pcs) Specifications:ID: 8mmOD: 15mmL: 24mm Fits:Flashforge Creator Pro (Y Axis)Prusa MK2/SPrusa MK2.5/SPrusa MK3/S/+Prusa MINI/+Robo R1/+Anet A8Anet A8 PlusOther printers...

Robo R1 Linear Rod - 8mm - X Axis  G6 high precision, HRC62 Hard Chrome Plated, Gcr15 steel, smooth linear rods.  Includes: Linear rod (1 pcs) Location: X axis Fits:Robo R1Robo R1+

Robo R1 Linear Rod - 8mm - Y Axis  G6 high precision, HRC62 Hard Chrome Plated, Gcr15 steel, smooth linear rods.  Includes: Linear rod (1 pcs) Location: Y axis Fits:Robo R1Robo R1+

Robo R1 Linear Rod - 8mm - Z Axis  G6 high precision, HRC62 Hard Chrome Plated, Gcr15 steel, smooth linear rods.  Includes: Linear rod (1 pcs) Location: Z axis Fits:Robo R1Robo R1+

Robo 3D Brass Nozzle Size:  0.40mm  Fits: Robo R1Robo R1+Robo R2Robo C2

Nozzle Coat™  Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block. Includes:...

Power Supply Cord AC power cord that runs from the power supply to a USA type wall outlet  Includes: Power cord (1 pcs) Note: Power supply is not included

Power Rocker Switch for Robo R1+ 3D Printer Includes: Switch (1 pcs) Fits: Robo R1Robo R1+

  Micro-Swiss Wear-Resistant Nozzle with M6 Threads This M6 thread, Robo 3D style nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It...

Rubber Feet for Robo R1+ Includes: Rubber foot (4 pcs) Fits:Robo R1Robo R1+

Robo R1+ SD Card Bracket  Includes: Bracket (1 pcs) Fits:Robo R1Robo R1+   

Robo R1+ Spool Holder  Includes: Spool holder (1 pcs) Fits:Robo R1Robo R1+  Note: These are new, but this recent batch is older stock that has minor scuffing from storage.

Stepper Driver for the Robo R1/+ 3D Printer Includes: Stepper Driver (1 pcs)Heatsink (1 pcs) Fits: Robo R1Robo R1+ Color of stepper driver may be different than picture

Nema17 Stepper Motor for Robo R2 and C2 3D Printers Includes:Motor (1 pcs)Filament drive gear - installed (1 pcs) Fits: Robo R2Robo C2*Robo R1/+ (X/Y Axis Only) **Notes: This motor will work for the X and Y axis of all the above printers...

Nema17 Stepper Motor For the X/Y and Extruder axis of the R1/+, R2 and C2 3D printers. Includes: Motor (1 pcs) Fits:Robo R2Robo C2Robo R1Robo R1+

  Super Lube 82340 - Synthetic Grease with SYNCOLON™ (PTFE)  This small size pouch is great for lubing the filament drive gears on dual gear or orbiting gear extruders. Includes: 1 Pouch Size: 1 cc Contains no...

  Super Lube 21010 - Synthetic Grease with SYNCOLON™ (PTFE)  Super Lube 21010 is a Prusa Research approved lubricant.   Use on your Bondtech drive gears, Linear bearings or anywhere else you need a high quality...

  Super Lube 21030 - Synthetic Grease with SYNCOLON™ (PTFE)  This is a Prusa Research approved lubricant.   Can be used on drive gears, Linear bearings or anywhere else you need a high quality grease...

4 Position, 90 Degree Right Angle, Terminal Block Header Includes: Header (1 pcs) Amps: 12Pitch: 5.08mm  

Terminal Block Plug 5.08mm Includes: Plug (1 pcs) Specs:2 position20 ampSafety approval:  Shade of green may be different than photo

Terminal Block Plug 5.08mm Includes: Plug (1 pcs) Specs:4 position15 amp

4 Position Vertical Terminal Block Header Includes: Header (1 pcs) Amps: 12Pitch: 5.08mm

PB Select™ Thermistor for Robo R1  Robo 3D R1+ replacement thermistor Note: It helps to use a zip tie to hold the thermistor wire close to the extruder or use this printable bracket to guide the wire. Includes: Thermistor (1...

Tube Grease for lubing the rods and ball screws of your 3D printer. This is the same grease that comes stock with Robo 3D R1+/R2 printers. Includes: Grease (1 pcs) Size: 10g

Robo R1+ X Carriage Includes: Carriage (1 pcs) Fits: R1/R1+ Note: Does not include the linear bearings. Click here to purchase linear bearings  

Robo R1+ X Carriage with Bearings  This is the bracket the extruder rides on. Includes: Carriage (1 pcs)Bearings (4 pcs) Fits:Robo R1Robo R1+ Note: this latest batch came bulk packaged, so there is minor scuffing on some of the plastic.

Robo R1+ Y Axis Pillow Blocks  Two complete sets. Hardware not included. Includes: Pillow block - top half (2 pcs)Pillow block - bottom half (2 pcs)  Fits:Robo R1Robo R1+ 

Robo R1+ Y Belt Clamp - 2 Pack Includes: Belt clamp (2 pcs) Location: Y belt Fits:Robo R1Robo R1+

Y Bracket for Robo R1+ These brackets connect the two Y-Axis rods that the bed travels on.  Note: Magnets will need to be glued in, in the appropriate orientation for your glass bed. We recommend using Epoxy, Polymer Bonding Kit or...

Idler Side Z Axis Carriage for Robo R1+ Replacement Z Carriage for the idler side Z-axis (non motor side) Includes: Carriage (1 pcs) Location: Idler Side Fits: R1+ Note: This is the carriage only, it does not...

Motor Side Z Carriage for Robo R1+ Replacement z axis carriage with motor mount for Z-axis. Includes: Carriage (1 pcs) Location Motor Side (1 pcs) Fits: R1+ Note This is the carriage only, it does not include: bearings, leadscrew...

Robo R1+ Z Stabilizer Brackets Includes: Brackets (2 pcs) Fits:Robo R1Robo R1+ 

Robo R1+ Z Stop Brackets  Includes: Bracket (2 pcs) Fits:Robo R1Robo R1+