Flashforge
Use the filter box below to narrow down the Flashforge 3D Printer parts you are looking for:
-
Limit Switch (Z Axis) Adventurer 4 | Flashforge
Flashforge
Price: $11.95Flashforge Z Axis Limit Switch Includes: Limit switch (1 pcs) Fits: Adventurer 4 Scroll down for instruction videoPrice: $11.95 -
USB Interface Board (PCB) Adventurer 4, Guider 3 Plus | Flashforge
Flashforge
Price: $15.95Flashforge USB Interface PCB Board (USB Port) Includes: USB board (1 pcs) Fits: Adventurer 4Guider 3 PlusPrice: $15.95 -
Glass Build Plate - Adventurer 3 | Flashforge
Flashforge
Price: $29.95Flashforge Glass Build Plate Includes: Glass build plate (1 pcs) Fits: Adventurer 3 Note: This is not an upgrade kit, this bed will only work if your printer already uses a glass build plate. WARNING Always allow the glass...Price: $29.95 -
Build Plate Frame for Glass Bed - Adventurer 3 | Flashforge
Flashforge
Price: $19.95Flashforge Build Plate Frame This is the frame that holds the glass bed in place. Includes: Plastic frame (1 pcs) Fits: Adventurer 3 (with glass bed) Notes:This frame will not work with the removable flexible bed. You will need this...Price: $19.95 -
Build Plate Base (Magnetic) - Adventurer 4 | Flashforge
Flashforge
Price: $69.95Flashforge Magnetic Build Plate Base For use with Flashforge flexible build plate (not included) Includes: Magnetic build plate base (1 pcs) Fits: Adventurer 4 Note: If you are upgrading from a glass build plate you will also need the plastic...Price: $69.95 -
Build Plate Frame for Magnetic Bed - Adventurer 4 | Flashforge
Flashforge
Price: $19.95Flashforge Build Plate Frame This is the frame that holds the magnetic base in place. Includes: Plastic frame (1 pcs) Fits: Adventurer 4 Notes: This frame will not work with the glass bedMounting hardware not included Little...Price: $19.95 -
Build Plate Frame for Glass Bed - Adventurer 4/Lite | Flashforge
Flashforge
Price: $19.95Flashforge Build Plate Frame for Glass Bed This is the frame that holds the glass bed in place. Includes: Plastic frame (1 pcs) Fits:Adventurer 4 LiteAdventurer 4 (with glass bed) Notes:This frame will not work with the magnetic bed. You will...Price: $19.95 -
X Axis Bushing Set - Adventurer 3/4, MP Voxel, Robo E3 | Flashforge
Flashforge
Price: $12.95Bushing Set for X Axis These are the small brass bushings the X axis carriage slides on. Includes: 6mm bushing (1 pcs)8mm bushing (2 pcs) Fits:Adventurer 3Adventurer 4Robo E3Monoprice VoxelPrice: $12.95 -
Glass Build Plate Assembly - Adventurer 3, MP Voxel, Robo E3 | Flashforge
Flashforge
Price: $54.95Flashforge Glass Build Plate Assembly You can use this assembly to convert your Adventurer 3 to a glass build plate. Includes: Glass build plate (1 pcs)Build plate frame (1 pcs)Heater (1 pcs)Heater pads (4 pcs)Mounting screws (3 pcs)Bearing...Price: $54.95 -
Bed Leveling Springs - Creator 3/3 Pro, Guider 2/2S HT | Flashforge
Flashforge
Price: $8.95Flashforge Bed Leveling Springs - 3 Pack Strong springs for leveling the build plate. Includes: Spring (3 pcs) Fits: Creator 3Creator 3 ProGuider 2Guider 2S HTPrice: $8.95 -
Air Filter - Adventurer 4, Guider 3, Guider 3P, Creator 3, Creator 3P | Flashforge
Flashforge
Price: $8.95Flashforge Air Filter HEPA and charcoal air filter. Includes: Filter (1 pc) Fits:Adventurer 4Guider 3Guider 3 PlusCreator 3Creator 3 ProPrice: $8.95 -
Linear Rod - Y Axis - Guider 2/2S HT | Flashforge
Flashforge
Price: $14.95Flashforge Linear Rod - Y Axis Includes: Linear rod (1 pcs) Location: Y Axis Fits:Guider 2Guider 2S HTRobo E3 ProPrice: $14.95 -
Linear Rod - X Axis - Guider 2/2S HT | Flashforge
Flashforge
Price: $14.95Flashforge Linear Rod - X Axis Includes: Linear rod (1 pcs) Location: X Axis Fits:Guider 2Guider 2S HTRobo E3 ProPrice: $14.95 -
MK10 Micro Swiss Nozzle (for PTFE Lined Hotend*)
Micro Swiss
Price: $14.99MK10 Plated Wear-Resistant Nozzle for PTFE-Lined Hotend This nozzle is for PTFE lined hotends only. It has a larger diameter hole in the top, so the PTFE tube can slide into the nozzle. It will not work with all metal hotends...Price: $14.99 -
MK10 Micro Swiss Nozzle for All Metal Hotend Kit* (A2 Steel)
Micro Swiss
Price: $19.00Micro Swiss MK10 Wear-Resistant (A2 Tool Steel) Nozzle for Micro Swiss All Metal Hotend Kit Perfect for printing abrasive material, such as carbon fiber, metal filled, wood-filled, glow in the dark, etc. *Note: This...Price: $19.00 -
MK10 Micro Swiss Nozzle for All Metal Hotend Kit*
Micro Swiss
Price: $14.99MK10 Plated Wear-Resistant Nozzle for Micro Swiss All Metal Hotend Kit If you are printing abrasive material, such as carbon fiber, stainless steel, wood-filled or any other metal filled filaments, this will greatly improve the life of your...Price: $14.99 -
MK10 Brass Nozzle (Only Compatible with Micro Swiss All Metal Hotend)
PB Select™
Price: $7.95MK10 Brass Nozzle (for Micro Swiss All Metal Hotend Only) Note: Will not fit the stock PTFE lined hotend. This nozzle has completely different internal dimensions to work with the Micro Swiss thermal barrier tube...Price: $7.95 -
Nozzle Coat | 4ml
PB Select™
Price: $14.99Nozzle Coat™ Nozzle Coat is a water-based PTFE nano coating for your nozzle & heater block. Using Nozzle Coat will help reduce the amount of plastic that sticks to the exterior of your nozzle & heater block. Includes:...Price: $14.99 -
Glass Build Plate - Adventurer 4*/Lite | Flashforge
Flashforge
Price: $29.95Flashforge Glass Build Plate One side is smooth, one side is textured. Includes: Glass build plate (1 pcs) Fits:Adventurer 4 LiteAdventurer 4 (with glass build plate) Notes:This is not an upgrade kit. If your printer currently has a magnetic...Price: $29.95 -
Stepper Motor - Z Axis - Creator 3/Pro | Flashforge
Flashforge
Price: $89.95Flashforge Z Motor Includes: Z axis motor with leadscrew (1 pcs) Fits: Creator 3Creator 3 ProPrice: $89.95